Dotaz: Leadtek Winfast 2000XP Expert

[LesTR]

Zdravim,
vim, ze se to tu jiz resilo hodnekrat, ale me se porad nedari tuto kartu rozchodit. Prosel jsem veskere prispevky zde, googlim uz asi 2 mesic, zatim bez jakehokoliv vysledku.
Karta neprehrava televizi. Pri hledani kanalu, kanaly nalezne, ale nejde prehrat zadny program.
KdeTv konci s hlaskou: Nelze prehravat video, Se soucasnym nastavenim modulu neni mozne prehravat video, otestujte prehravani s v4l2 (nebo 1, kdyz mam vybran v4l2) modulem.
Tvtime blikne na do konsole napise: xvoutput: No XVIDEO port found which supports YUY2 images. + nejake kecy ohledne driveru pro cipy na ati kartach.
Jde o tv kartu viz $subjekt

lspcie -v
01:07.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
        Subsystem: LeadTek Research Inc. Unknown device 6611
        Flags: bus master, medium devsel, latency 32, IRQ 74
        Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

Hugo:/# lsmod |grep cx88
cx8800                 31692  0
cx88xx                 58660  1 cx8800
ir_common              28164  1 cx88xx
i2c_algo_bit            8776  1 cx88xx
video_buf              23428  2 cx8800,cx88xx
tveeprom               14160  1 cx88xx
compat_ioctl32          1792  1 cx8800
btcx_risc               5064  2 cx8800,cx88xx
videodev               21440  2 cx8800,cx88xx
v4l1_compat            12356  2 cx8800,videodev
v4l2_common            20736  3 cx8800,tuner,videodev
i2c_core               20096  5 cx88xx,tuner,i2c_algo_bit,tveeprom,i2c_nforce2

Hugo:/# uname -r
2.6.18-3-k7

distribuci je debian, nejdriv testing v tuhle chvili unstable.
Nema nekdo stejnou kartu a funkcni?
Mam takove podezreni, ze za nefunkcnosti stoji v4l2, se starsim jadrem (2.6.12) fungoval alespon obraz.
Vcera jsem zkousel zkompilovat vanilla 2.6.20.3, ale vysledek byl stejny.
Pokud budou potreba jakekoliv dalsi informace, rad je dodam.
Dekuji za namety k reseni, tohle je posledni vec, ktera me "nuti" mit na disku windows : (

Odpovědi

[LesTR]

Jeste dodam, ze po nahrati modulu cx88xx a cx8800 se v dmesg objevi toto:

cx2388x v4l2 driver version 0.0.6 loaded
PCI: Enabling device 0000:01:07.0 (0000 -> 0002)
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 74
CORE cx88[0]: subsystem: 107d:6611, board: Leadtek Winfast 2000XP Expert [card=5,autodetected]
TV tuner 44 at 0x1fe, Radio tuner -1 at 0x1fe
tuner 2-0043: chip found @ 0x86 (cx88[0])
tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 2-0060: All bytes are equal. It is not a TEA5767
tuner 2-0060: chip found @ 0xc0 (cx88[0])
tuner 2-0060: type set to 44 (Philips 4 in 1 (ATI TV Wonder Pro/Conexant))
cx88[0]: Leadtek Winfast 2000XP Expert config: tuner=38, eeprom[0]=0x01
input: cx88 IR (Leadtek Winfast 2000XP as /class/input/input4
cx88[0]/0: found at 0000:01:07.0, rev: 5, irq: 74, latency: 32, mmio: 0xfb000000
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
cx88[0]/0: registered device radio0

[knizmi]

Neresilo se tu nekde, ze KdeTV umi prehravat jen analog. video? Tahle karta, pokud vim, je DVB-T, takze zkuste Kaffeine.

[vasek125]

Tahle karta, pokud vim je analog.

[LesTR]

Bohuzel, tohle je analogova karta.

[nhy]

Ja mam tiez tuto kartu a je analogova. A ide mi v debiane testing. Vid odpoved nizsie

[nhy]

01:09.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
        Subsystem: LeadTek Research Inc. Unknown device 6611
        Flags: bus master, medium devsel, latency 32, IRQ 50
        Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
        Capabilities: [44] Vital Product Data
        Capabilities: [4c] Power Management version 2

[knizmi]

Tak to se omlouvam, zamenil jsem ji s jinou.

[nhy]

Mam debian testing a presne tu istu kartu a ide mi to v tvtime. V kdetv som mal podobne problemy ale neriesim to, kedze tvtime ide rovnako ako vo windows. Tu je moja konfiguracia:

lsmod | grep cx88
cx8800                 41740  0
cx88xx                 70308  1 cx8800
ir_common              34692  1 cx88xx
i2c_algo_bit           13832  1 cx88xx
video_buf              30852  2 cx8800,cx88xx
tveeprom               21264  1 cx88xx
compat_ioctl32         13184  1 cx8800
btcx_risc               9608  2 cx8800,cx88xx
videodev               29696  2 cx8800,cx88xx
v4l1_compat            16260  2 cx8800,videodev
v4l2_common            28672  4 tuner,cx8800,compat_ioctl32,videodev
i2c_core               27776  9 it87,ds1621,i2c_isa,nvidia,tuner,cx88xx,i2c_algo_bit,tveeprom,i2c_nforce2

uname -a
2.6.18-4-amd64
V /etc/modules.conf mam:

alias char-major-81 vidoedev
alias char-major-81-0 cx8800
alias char-major-81-1 cx8800
alias char-major-81-2 cx8800
alias char-major-81-3 cx8800
options cx8800 irq_debug=1 tuner=38 card=5 video_debug=1 video_nr=0 radio_nr=0 nicam=1 gbuffers=4

V /etc/modprobe.d mam(kedze modules.conf sa pri zmene jadra prepisu odtialto) mam skript tv, v ktorom je:

alias char-major-81 vidoedev
alias char-major-81-0 cx8800
alias char-major-81-1 cx8800
alias char-major-81-2 cx8800
alias char-major-81-3 cx8800
options cx8800 irq_debug=0 video_debug=0 video_nr=0 radio_nr=0

Pre istotu ked to nastavis, daj prikaz update-modules Kedze ale ti kdetv nieco najde, predpokladam, ze chyba bude v nastaveni tvtime. Tu je hlavny obsah konfigu /.tvtime/tvtime.xml

  option name="DefaultBrightness" value="50"
  option name="DefaultContrast" value="24"
  option name="DefaultSaturation" value="50"
  option name="DefaultHue" value="50"
  option name="Norm" value="PAL"
  option name="PrevChannel" value="4"
  option name="Channel" value="3"
  option name="FramerateMode" value="0"
  option name="OverScan" value="3.5"
  option name="CheckForSignal" value="1"
  option name="AudioBoost" value="-1"
  option name="AlwaysOnTop" value="1"
  option name="QuietScreenshots" value="0"
  option name="UnmuteVolume" value="25700"
  option name="Muted" value="0"
  option name="V4LInput" value="0"
  option name="AudioMode" value="mono"
  option name="PalDKMode" value="0"
  option name="FullScreen" value="1"
  option name="ColourInvert" value="0"
  option name="Frequencies" value="europe"
  option name="WideScreen" value="0"

Stanice som musel ladit tak, ze z windows som zobral ich frekvencie a nastavil frekvenciu napevno, pretoze inak bol zly obraz. A nakoniec este jedna vec. Mam nforce4 a nvidiu Geforce 6600GT. Neviem ci je problem v tej ATI, ale nemal byt. Ja som mal problem tiez, ze mi to neslo(no signal v tvtime aj kdetv) a problem bol v tom modules.conf, pretoze som tam mal nastavenia dvojmo a bylo sa to.

[LesTR]

Zdravim
problem vyresen!
Bylo potreba pridat do xorg.conf nasledujici 2 radky do sekce device

       Option      "VideoOverlay" "on"
        Option      "OpenGLOverlay" "off"

njn, ati : )

[Whitefox(beginner)]

Zdravim jedu na Ubuntu 7.04 s 2.6.20-15-generic #2 SMP Sun Apr 15 06:17:24 UTC 2007 x86_64 GNU/Linux TV Karta Winfast 2000 XP: Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)

lsmod | grep cx88 cx8800 41100 0 cx88xx 74532 1 cx8800 ir_common 34308 1 cx88xx i2c_algo_bit 9608 1 cx88xx video_buf 29700 2 cx8800,cx88xx tveeprom 19216 1 cx88xx compat_ioctl32 11136 1 cx8800 btcx_risc 6664 2 cx8800,cx88xx videodev 29824 2 cx8800,cx88xx v4l2_common 28800 4 tuner,cx8800,compat_ioctl32,videodev v4l1_compat 14980 2 cx8800,videodev i2c_core 26624 6 i2c_ec,tuner,cx88xx,i2c_algo_bit,tveeprom,i2c_viapro

Grafika ATI X1300 Option "VideoOverlay" "on" Option "OpenGLOverlay" "off" nastaveno

a mám stejný problém s tvtimem .. jen problikne a konec ... v terminalu No XVIDEO port found which supports YUY2 images

kdybyste negdno neco vedel budou vam patrit me diky