Dotaz: Samba - nelze přidat uživatele

[Pavel]

Zdravím, na ubuntu server mám rozjetou sambu a stávající uživatelé se úspěšně přihlašují, i cestují profili. Ovšem pokud vytvořim nového uživatele, na serveru se při přihlášení vytvoří jeho jméno v profilech, ale při odhlášení se již profil neaktualizuje a vyskočí hláška, že přístup byl odepřen.

V logu mám jen toto:

[2013/09/17 21:19:08.386589,  3] lib/access.c:338(allow_access)
  Allowed connection from 10.200.10.1 (10.200.10.1)
[2013/09/17 21:19:08.386832,  3] smbd/oplock.c:922(init_oplocks)
  init_oplocks: initializing messages.
[2013/09/17 21:19:08.386987,  3] smbd/oplock_linux.c:226(linux_init_kernel_oplocks)
  Linux kernel oplocks enabled
[2013/09/17 21:19:08.387194,  3] smbd/process.c:1662(process_smb)
  Transaction 0 of length 72 (0 toread)
[2013/09/17 21:19:08.387292,  2] smbd/reply.c:553(reply_special)
  netbios connect: name1=domena          0x20 name2=PC-01          0x0
[2013/09/17 21:19:08.387406,  2] smbd/reply.c:573(reply_special)
  netbios connect: local=domena remote=pc-01, name type = 0
[2013/09/17 21:19:22.226788,  3] lib/access.c:338(allow_access)
  Allowed connection from 10.200.10.1 (10.200.10.1)
[2013/09/17 21:19:22.227034,  3] smbd/oplock.c:922(init_oplocks)
  init_oplocks: initializing messages.
[2013/09/17 21:19:22.227191,  3] smbd/oplock_linux.c:226(linux_init_kernel_oplocks)
  Linux kernel oplocks enabled
[2013/09/17 21:19:22.227412,  3] smbd/process.c:1662(process_smb)
  Transaction 0 of length 137 (0 toread)
[2013/09/17 21:19:22.227500,  3] smbd/process.c:1467(switch_message)
  switch message SMBnegprot (pid 6134) conn 0x0
[2013/09/17 21:19:22.228224,  3] smbd/negprot.c:598(reply_negprot)
  Requested protocol [PC NETWORK PROGRAM 1.0]
[2013/09/17 21:19:22.228316,  3] smbd/negprot.c:598(reply_negprot)
  Requested protocol [LANMAN1.0]
[2013/09/17 21:19:22.228395,  3] smbd/negprot.c:598(reply_negprot)
  Requested protocol [Windows for Workgroups 3.1a]
[2013/09/17 21:19:22.228471,  3] smbd/negprot.c:598(reply_negprot)
  Requested protocol [LM1.2X002]
[2013/09/17 21:19:22.228547,  3] smbd/negprot.c:598(reply_negprot)
  Requested protocol [LANMAN2.1]
[2013/09/17 21:19:22.228622,  3] smbd/negprot.c:598(reply_negprot)
  Requested protocol [NT LM 0.12]
[2013/09/17 21:19:22.228853,  3] smbd/negprot.c:419(reply_nt1)
  using SPNEGO
[2013/09/17 21:19:22.228927,  3] smbd/negprot.c:704(reply_negprot)
  Selected protocol NT LM 0.12
[2013/09/17 21:19:22.230973,  3] smbd/process.c:1662(process_smb)
  Transaction 1 of length 240 (0 toread)
[2013/09/17 21:19:22.231182,  3] smbd/process.c:1467(switch_message)
  switch message SMBsesssetupX (pid 6134) conn 0x0
[2013/09/17 21:19:22.231290,  3] smbd/sesssetup.c:1333(reply_sesssetup_and_X)
  wct=12 flg2=0xc807
[2013/09/17 21:19:22.231411,  2] smbd/sesssetup.c:1279(setup_new_vc_session)
  setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2013/09/17 21:19:22.231514,  3] smbd/sesssetup.c:1065(reply_sesssetup_and_X_spnego)
  Doing spnego session setup
[2013/09/17 21:19:22.231646,  3] smbd/sesssetup.c:1107(reply_sesssetup_and_X_spnego)
  NativeOS=[Windows 2002 Service Pack 3 2600] NativeLanMan=[Windows 2002 5.1] PrimaryDomain=[]
[2013/09/17 21:19:22.231807,  3] smbd/sesssetup.c:660(reply_spnego_negotiate)
  reply_spnego_negotiate: Got secblob of size 40
[2013/09/17 21:19:22.232779,  3] ../libcli/auth/ntlmssp.c:34(debug_ntlmssp_flags)
  Got NTLMSSP neg_flags=0xa2088207
[2013/09/17 21:19:22.234408,  3] smbd/process.c:1662(process_smb)
  Transaction 2 of length 256 (0 toread)
[2013/09/17 21:19:22.234615,  3] smbd/process.c:1467(switch_message)
  switch message SMBsesssetupX (pid 6134) conn 0x0
[2013/09/17 21:19:22.234712,  3] smbd/sesssetup.c:1333(reply_sesssetup_and_X)
  wct=12 flg2=0xc807
[2013/09/17 21:19:22.234784,  2] smbd/sesssetup.c:1279(setup_new_vc_session)
  setup_new_vc_session: New VC == 0, if NT4.x compatible we would close all old resources.
[2013/09/17 21:19:22.234854,  3] smbd/sesssetup.c:1065(reply_sesssetup_and_X_spnego)
  Doing spnego session setup
[2013/09/17 21:19:22.234934,  3] smbd/sesssetup.c:1107(reply_sesssetup_and_X_spnego)
  NativeOS=[Windows 2002 Service Pack 3 2600] NativeLanMan=[Windows 2002 5.1] PrimaryDomain=[]
[2013/09/17 21:19:22.235039,  3] ../libcli/auth/ntlmssp_server.c:348(ntlmssp_server_preauth)
  Got user=[] domain=[] workstation=[PC-01] len1=1 len2=0

PC se připojují do domény domena.cz. Ještě přikládám nastavení samby:

[global]

log file = /var/log/samba/log.%m
#Nazev domeny:
domain admin = admin	
#domain admin user = sadmin
workgroup = domena.cz
#Nazev tohoto serveru:
netbios name = domena.cz
server string =
time server = yes
hide dot files = yes
os level = 114
passdb backend = tdbsam
security = user
username map = /etc/samba/smbusers
name resolve order = wins bcast hosts


map archive = no
map hidden = Yes
map system = Yes

# Radic domeny:
domain logons = yes
preferred master = yes
wins support = yes
wins server = localhost
load printers = no
#printcap name = CUPS
#printing = CUPS

# Default logon
logon drive = H:
logon script = scripts/netlogon.bat
logon path = \\domena.cz\profile\%U\profile

# set the loglevel
log level = 3


[homes]
	comment = Home
	valid users = %S
	writable = yes
	browsable = no
	path = /samba/profiles/%U

[Netlogon]
	comment = Network Logon Service
	path = /samba/netlogon
	admin users = Administrator
	valid users = %U
	read only = no
	guest ok = yes
	writable = no
	share modes = no
	browsable = no

[profile]
	writeable = yes
	writable = yes
	path = /samba/profiles
	guest ok = no
	comment = User profiles
	valid users = %U
	create mode = 0600
	browsable = no
	directory mode = 0700

Odpovědi

[Pavel]

Tak jsem zkusil stejné nastavení přenést na jiný server, a tam to funguje normálně. Nenapadá někoho co by to mohlo být?