AbcLinuxu:/ Poradna / Linuxová poradna / Radeon 9200 pod Knoppixem 3.4

Štítky: ATI, audio, C, CVS, DEB, Debian, distribuce, dpkg, Firefox, glxgears, grafické karty, grafické toolkity, grafika, hardware, KDE, kernel, Knoppix, kompilace, Linux, Live, mc, Mozilla, multimédia, ovladače, PCI, práva, programování, prohlížeče, Qt, RPM, sběrnice, Slackware, správci souborů, textové editory, urpmi, Version Control System, video, Vim, XMMS, 3D

Dotaz: Radeon 9200 pod Knoppixem 3.4

12.8.2004 10:00 Krakonoš | skóre: 17 | Nová Ves v Horách
Radeon 9200 pod Knoppixem 3.4

Přečteno: 1013×

Odpovědět | Admin

Zdar, mám nainstalovanej knoppix 3.4 na hdd... spouštím ho s jádrem 2.4.24... XFree86 v 4.3... Stáhnul jsem si ovladače z ati.com jako .rpm apokoušel sem se je nainstalovat (alien -i ovladac.rpm), ale bez úspěchu... Poté jsem našel na netu instalační script, kterej sem si stáhnul a nainstaloval tak ty ovaladače (podle toho scriptu bez problémů) - bohužel nevim jaká verze ovladačů, pač si je stahoval z netu a verzi sem tam nikde nenašel.... No v každém případě když jsem to nainstalil, tak při zadání startx to hodilo chybovou hlášku, že žádná z nalezených obrazovek nemá použitelnou konfiguraci... Ve chvíli kdy v XF86Config-4 přepíšu ovladač na fbdev nebo ati, tak ale vše funguje skoro jak má... Bohužel s tim neumí moc pracovat, tže při startu se vypne monitor, zase zapne a hodí si to tam nejmenší možnou konfiguraci... Zatim sem to vyřešil stylem, že sem mu vnutil že můj monitor nezvládne "míň" jak 1280x1024@85Hz, tže mi to naběhne v tomhle....bohužel jenom 256 barev.... Tže bych s tim měl něco udělat, ale vůbec netušim co

Díky za pomoc :-)

Nástroje: Začni sledovat (1) ?

Odpovědi

12.8.2004 13:05 ZS-Man
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

Co znamena --bez uspechu? chtelo by to nejaky vypisy. Jinak musis nainstalovat ovladac, spustit fglrxconfig, upravit konfug pro X-ka. Musis mit zavedenej modul pro agpgart.

12.8.2004 13:31 Krakonoš | skóre: 17 | Nová Ves v Horách
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

Bez úspěchu je že to hodilo tohle :

dpkg: chyba při zpracovávání fglrx_4.3.0-4.11_i386.deb (--install): zkouším přepsat soubor `/usr/X11R6/lib/libGL.so.1.2', který je také v balíku xlibmesa-gl dpkg-deb: podproces paste byl zabit signálem (Přerušena roura (SIGPIPE)) Při zpracování nastaly chyby: fglrx_4.3.0-4.11_i386.deb

Jinak log z XFree86 je tady :

This is a pre-release version of XFree86, and is not supported in any
way.  Bugs may be reported to XFree86@XFree86.Org and patches submitted
to fixes@XFree86.Org.  Before reporting bugs in pre-release versions,
please check the latest version in the XFree86 CVS repository
(http://www.XFree86.Org/cvs).

XFree86 Version 4.3.0.1 (Debian 4.3.0.dfsg.1-1 20040428170728 \\
fabbione@trider-g7.int.fabbione.net)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.23 i686 [ELF] 
Build Date: 28 April 2004
	Before reporting problems, check http://www.XFree86.Org/
	to make sure that you have the latest version.
Module Loader present
OS Kernel: Linux version 2.4.26 (root@Knoppix) (gcc version 2.95.4 20011002 \\
(Debian prerelease)) #1 SMP Sa Apr 17 19:33:42 CEST 2004 
Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Thu Aug 12 13:14:03 2004
(==) Using config file: "/etc/X11/XF86Config-4"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "PS/2 Mouse"
(**) FontPath set to "/usr/X11R6/lib/X11/fonts/misc:unscaled,
/usr/X11R6/lib/X11/fonts/75dpi:unscaled,
/usr/X11R6/lib/X11/fonts/100dpi:unscaled,
/usr/X11R6/lib/X11/fonts/Speedo,
/usr/X11R6/lib/X11/fonts/PEX,
/usr/X11R6/lib/X11/fonts/cyrillic,
/usr/X11R6/lib/X11/fonts/Type1,
/usr/share/fonts/ttf/western,
/usr/share/fonts/ttf/decoratives,
/usr/share/fonts/truetype,
/usr/share/fonts/truetype/openoffice,
/usr/share/fonts/truetype/ttf-bitstream-vera,
/usr/share/fonts/latex-ttf-fonts,
/usr/local/share/fonts,/usr/share/fonts,
/usr/X11R6/lib/X11/fonts,/usr/share/fonts/afms,
/usr/share/fonts/ttf,/usr/share/fonts/type1"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(**) ModulePath set to "/usr/X11R6/lib/modules"
(**) Option "AllowMouseOpenFail" "true"
(--) using VT number 7

(WW) Open APM failed (/dev/apm_bios) (No such device)
(II) Module ABI versions:
	XFree86 ANSI C Emulation: 0.2
	XFree86 Video Driver: 0.6
	XFree86 XInput driver : 0.4
	XFree86 Server Extension : 0.2
	XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x80020014, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,01e0 card 0000,0000 rev c1 class 06,00,00 hdr 80
(II) PCI: 00:00:1: chip 10de,01eb card 1462,5700 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:2: chip 10de,01ee card 1462,5700 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:3: chip 10de,01ed card 1462,5700 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:4: chip 10de,01ec card 1462,5700 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:00:5: chip 10de,01ef card 1462,5700 rev c1 class 05,00,00 hdr 80
(II) PCI: 00:01:0: chip 10de,0060 card 1462,5700 rev a4 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0064 card 1462,5700 rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,0067 card 1462,5700 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,0067 card 1462,5700 rev a4 class 0c,03,10 hdr 80
(II) PCI: 00:02:2: chip 10de,0068 card 1462,5700 rev a4 class 0c,03,20 hdr 80
(II) PCI: 00:04:0: chip 10de,0066 card 1462,570c rev a1 class 02,00,00 hdr 00
(II) PCI: 00:06:0: chip 10de,006a card 1462,5700 rev a1 class 04,01,00 hdr 00
(II) PCI: 00:08:0: chip 10de,006c card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:09:0: chip 10de,0065 card 1462,5700 rev a2 class 01,01,8a hdr 00
(II) PCI: 00:1e:0: chip 10de,01e8 card 0000,0000 rev c1 class 06,04,00 hdr 01
(II) PCI: 02:00:0: chip 1002,5961 card 174b,7c13 rev 01 class 03,00,00 hdr 80
(II) PCI: 02:00:1: chip 1002,5941 card 174b,7c12 rev 01 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,2), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
	[0] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:8:0), (0,1,1), BCTRL: 0x0002 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:30:0), (0,2,2), BCTRL: 0x000a (VGA_EN is set)
(II) Bus 2 I/O range:
	[0] -1	0	0x0000c000 - 0x0000cfff (0x1000) IX[B]
(II) Bus 2 non-prefetchable memory range:
	[0] -1	0	0xe4000000 - 0xe5ffffff (0x2000000) MX[B]
(II) Bus 2 prefetchable memory range:
	[0] -1	0	0xd0000000 - 0xdfffffff (0x10000000) MX[B]
(--) PCI:*(2:0:0) ATI Technologies Inc unknown chipset (0x5961) rev 1, \\
Mem @ 0xd0000000/27, 0xe5000000/16, I/O @ 0xc000/8
(--) PCI: (2:0:1) ATI Technologies Inc unknown chipset (0x5941) rev 1, \\
Mem @ 0xd8000000/27, 0xe5010000/16
(II) Addressable bus resource ranges are
	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xe0000000 from 0xe3ffffff to 0xdfffffff
(II) Active PCI resource ranges:
	[0] -1	0	0xe6002000 - 0xe6002fff (0x1000) MX[B]
	[1] -1	0	0xe6001000 - 0xe6001fff (0x1000) MX[B]
	[2] -1	0	0xe6000000 - 0xe60000ff (0x100) MX[B]
	[3] -1	0	0xe6005000 - 0xe6005fff (0x1000) MX[B]
	[4] -1	0	0xe6004000 - 0xe6004fff (0x1000) MX[B]
	[5] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[6] -1	0	0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
	[7] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[8] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[9] -1	0	0x0000d800 - 0x0000d87f (0x80) IX[B]
	[10] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[11] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[B]
	[12] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[13] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges:
	[0] -1	0	0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
	[1] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
(II) Active PCI resource ranges after removing overlaps:
	[0] -1	0	0xe6002000 - 0xe6002fff (0x1000) MX[B]
	[1] -1	0	0xe6001000 - 0xe6001fff (0x1000) MX[B]
	[2] -1	0	0xe6000000 - 0xe60000ff (0x100) MX[B]
	[3] -1	0	0xe6005000 - 0xe6005fff (0x1000) MX[B]
	[4] -1	0	0xe6004000 - 0xe6004fff (0x1000) MX[B]
	[5] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[6] -1	0	0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
	[7] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[8] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[9] -1	0	0x0000d800 - 0x0000d87f (0x80) IX[B]
	[10] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[11] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[B]
	[12] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[13] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) Inactive PCI resource ranges after removing overlaps:
	[0] -1	0	0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
	[1] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[6] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xe6002000 - 0xe6002fff (0x1000) MX[B]
	[6] -1	0	0xe6001000 - 0xe6001fff (0x1000) MX[B]
	[7] -1	0	0xe6000000 - 0xe60000ff (0x100) MX[B]
	[8] -1	0	0xe6005000 - 0xe6005fff (0x1000) MX[B]
	[9] -1	0	0xe6004000 - 0xe6004fff (0x1000) MX[B]
	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[11] -1	0	0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
	[12] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[13] -1	0	0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
	[14] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[18] -1	0	0x0000d800 - 0x0000d87f (0x80) IX[B]
	[19] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[20] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[B]
	[21] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[22] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_clip.o": \\
 No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_norm.o":  \\
No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_xform.o":  \\
No symbols found
Skipping "/usr/X11R6/lib/modules/extensions/libGLcore.a:m_debug_vertex.o":  \\
No symbols found
(II) Module GLcore: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "bitmap"
(II) Reloading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Loading font Bitmap
(II) LoadModule: "speedo"
(II) Loading /usr/X11R6/lib/modules/fonts/libspeedo.a
Skipping "/usr/X11R6/lib/modules/fonts/libspeedo.a:spencode.o":  No symbols found
(II) Module speedo: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.1
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Speedo
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 2.0.2
	Module class: XFree86 Font Renderer
	ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.13.0
	Module class: XFree86 Server Extension
	ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/X11R6/lib/modules/drivers/fglrx_drv.o
(II) Module fglrx: vendor="Fire GL - ATI Research GmbH, Germany"
	compiled for 4.3.0.1, module version = 3.11.1
	Module class: XFree86 Video Driver
	ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	Module class: XFree86 XInput Driver
	ABI class: XFree86 XInput driver, version 0.4
(II) FireGL8700/8800: Driver for chipset: ATI RV250 Id (R9000),
	ATI RV250 Ie (R9000), ATI RV250 If (R9000), ATI RV250 Ig (R9000),
	ATI RV250 Ld (M9), ATI RV250 Le (M9), ATI RV250 Lf (M9),
	ATI RV250 Lg (M9), ATI RV280 5960 (R9200 PRO),
	ATI RV280 Ya (R9200LE), ATI RV250SE Yd (R9200SE),
	ATI RV250 5C61 (M9+), ATI RV250 5C63 (M9+), ATI R200 QH (R8500),
	ATI R200 QL (R8500), ATI R200 QM (R9100), ATI R200 QT (R8500),
	ATI R200 QU (R9100), ATI R200 BB (R8500), ATI RV350 AP (R9600),
	ATI RV350SE AQ (R9600SE), ATI RV350 AR (R9600 PRO),
	ATI RV350 NP (M10), ATI R300 AD (R9500), ATI R300 AE (R9500),
	ATI R300 AF (R9500), ATI R300 AG (Fire GL Z1/X1),
	ATI R300 ND (R9700 PRO), ATI R300 NE (R9700/R9500 PRO),
	ATI R300 NF (R9600 TX), ATI R300 NG (Fire GL X1),
	ATI R350SE AH (R9800SE), ATI R350 AK (Fire GL unknown),
	ATI RV350 AT (Fire GL T2), ATI RV350 AU (Fire GL T2),
	ATI RV350 AV (Fire GL T2), ATI RV350 AW (Fire GL T2),
	ATI R350 NH (R9800), ATI R350LE NI (R9800LE), ATI R350 NJ (R9800),
	ATI R350 NK (Fire GL X2), ATI RV350 NT (WS/M10), ATI R420 JH,
	ATI R420 JI, ATI R420 JJ, ATI R420 JK, ATI R420 JL, ATI R420 JM,
	ATI R420 JN, ATI R420 JP
(II) Primary Device is: PCI 02:00:0
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:2:0:1) found
(--) Chipset ATI RV280 Ya (R9200LE) found
(II) resource ranges after xf86ClaimFixedResources() call:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xe6002000 - 0xe6002fff (0x1000) MX[B]
	[6] -1	0	0xe6001000 - 0xe6001fff (0x1000) MX[B]
	[7] -1	0	0xe6000000 - 0xe60000ff (0x100) MX[B]
	[8] -1	0	0xe6005000 - 0xe6005fff (0x1000) MX[B]
	[9] -1	0	0xe6004000 - 0xe6004fff (0x1000) MX[B]
	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[11] -1	0	0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
	[12] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[13] -1	0	0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
	[14] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[15] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[16] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[17] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[18] -1	0	0x0000d800 - 0x0000d87f (0x80) IX[B]
	[19] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[20] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[B]
	[21] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[22] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
(II) fglrx(0): pEnt->device->identifier=0x820b750
(II) resource ranges after probing:
	[0] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[1] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[2] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[3] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[4] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[5] -1	0	0xe6002000 - 0xe6002fff (0x1000) MX[B]
	[6] -1	0	0xe6001000 - 0xe6001fff (0x1000) MX[B]
	[7] -1	0	0xe6000000 - 0xe60000ff (0x100) MX[B]
	[8] -1	0	0xe6005000 - 0xe6005fff (0x1000) MX[B]
	[9] -1	0	0xe6004000 - 0xe6004fff (0x1000) MX[B]
	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
	[11] -1	0	0xe5000000 - 0xe500ffff (0x10000) MX[B](B)
	[12] -1	0	0xd0000000 - 0xd7ffffff (0x8000000) MX[B](B)
	[13] -1	0	0xe5010000 - 0xe501ffff (0x10000) MX[B](B)
	[14] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[15] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[16] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[17] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[18] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[19] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[20] -1	0	0x0000f000 - 0x0000f00f (0x10) IX[B]
	[21] -1	0	0x0000d800 - 0x0000d87f (0x80) IX[B]
	[22] -1	0	0x0000d400 - 0x0000d4ff (0x100) IX[B]
	[23] -1	0	0x0000d000 - 0x0000d007 (0x8) IX[B]
	[24] -1	0	0x0000e400 - 0x0000e41f (0x20) IX[B]
	[25] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
	[26] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[27] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) fglrx(0): === [R200PreInit] === begin, [s]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(II) fglrx(0): PCI bus 2 card 0 func 0
(EE) fglrx(0): Given depth (8) is not supported by fglrx driver
(EE) fglrx(0): PreInitVisual failed
(EE) fglrx(0): R200PreInit failed
(II) fglrx(0): === [R200PreInit] === end
(II) UnloadModule: "fglrx"
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

When reporting a problem related to a server crash, please send
the full server output, not just the last messages.
This can be found in the log file "/var/log/XFree86.0.log".
Please report problems to submit@bugs.debian.org.

Jinak tušim, že všechno co říkáš dělá ten isntalační script...ten je na stránce http://kanotix.com/files/

12.8.2004 18:36 ZS-Man | skóre: 31 | blog: B26
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

nedelas to nahodou v X-kach? to neni dobre.S debianem sem nikdz nepracoval, takze jeho nastroje neznam.Mam slackware a 9200 na notebooku a delal sem to nejak takhle>

Stahni si ten ovladac z ati.com, to rpm-ko otevri treba v mc a ty adresare normalne zkopiruj do ./ . Pak ten ovladac rucne zkompiluj. Bude v /lib/modules/fglrx. Az budes mit OK zkompilovanej modul fglrx.ko, tak insmod fglrx.ko , spustis si konfigurak fglrxconfig, tam si tu grafiku nastavis a frcis :o)))))

v jadre musis mit podporu pro agpgart a pro tvoji chipset(radsi jako moduly) tak to zkus, uvidime.(mas ICQ?)

12.8.2004 21:59 Krakonoš | skóre: 17 | Nová Ves v Horách
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

No sice nevim jak to funguje ve slacku, ale v debianu by to mělo bejt alien -i package.rpm... Jinak v xkách to nedělám :-)

.... Mám vyřezenej start Xek úplně a když chcu, tak si je nastartuju ručně :-)

12.8.2004 20:07 Vlastimil Ott | skóre: 66 | blog: Plastique | Opava
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

Technická:

Ty symboly na začátku řádku v logovacím souboru mají svůj význam - je to napsáno na začátku logu. Proto je zbytečné vkládat sem celý log, dost lidí to otráví. Bohatě stačí řádky začínající (EE). Ty říkají vše.

Markers: (--) probed, (**) from config file, (==) default setting,
         (++) from command line, (!!) notice, (II) informational,
         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.

Práce: Liberix, o.p.s. | Blog: OpensourceBlog.cz | Online kurz Zlatý WordPress

12.8.2004 22:01 Krakonoš | skóre: 17 | Nová Ves v Horách
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

no já su v tom celkem lama, tak sem radči vypsal celej sobor...přecejenom to pro mě bylo jistější...jediný co sem pochopil bylo že WW je varování a EE error :-)

13.8.2004 12:13 ZS-Man
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

no ten alien by z toho mel udelat asi .deb a nainstalovat, ale zrejme to nefunguje.

takze znova...

Proste se podivej do /lib/modules/ jesli je tam adresar fglrx? jestli jo, tak v nem bude jeste build_mod. Tam spust sh make.sh . potom zpatky do fglrx a tam spust sh make_install.sh jestli je vsechno OK, tak insmod fglrx.ko, tim natahnes ten modul.

V jadre musis mit vyplou podporu DRI a zaplou podporu pro agpgart a chipset desky(nejlepe jako moduly, a ty musi byt taky nahrany.) To zjistis pomoci lsmod.

Potom spustis fglrxconfig a tam si nastavis vsechny mozny parametry. vetsinou staci odentrovat.

a tim by to mohlo byt hotovy.....

Jestli to takhle neklapne, tak napis kde ses zasek a budem pokracovat.... :o)

13.8.2004 12:50 Krakonoš | skóre: 17 | Nová Ves v Horách
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

Sice je to dost blbá otázka, ale - jak vypnu podporu DRI a zapnu podporu toho agpgart a ten chipset?

13.8.2004 13:04 ZS-Man
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

No, ted si trochu pozorneji prositam te vypis X serveu a koukam ze ten modul asi bude OK. takze sorry. A nastavoval jsi to pomovi toho fglrxconfig ? je tam primo otazka na rozliseni a bar.hloubku. ja sem mel nakonec na Slack10 "problem" v tom, ze Xserver (Xorg) pouzival xorg.conf , ale fglrxconfig se zapisoval do XF86Config-4 (nebo jak se menuje, ted sedim u WIN) takze stacilo prejmenovat.... :o)

To DRI & spol. se nastavuje v jadre. spustis /usr/src/tvojeverzejadra/make menuconfig , tam si vsechno potrebne nastavis a pak to jadro zkompilujes. Najdi si to tady na Abicku, je tu toho mraky......

13.8.2004 13:16 Krakonoš | skóre: 17 | Nová Ves v Horách
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

no fglrxconfig sem vůbec nedělal...sem předpokládal, že si to ten instalační script udělal sám....takže něco přepsal v XF86Config-4, ale nevim přesně co....tže zkusim ten xglrxconfig....

Jinak s tim jádrem - tohle vim, ale předpokládal sem, že by taky mohlo bejt něco jako možnost to překonfigurovat bez kompilace :-)

...no - asi neni :-)

13.8.2004 13:35 Krakonoš | skóre: 17 | Nová Ves v Horách
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

Mockrát díky, už to funguje...teda až na jeden problémek - při startu xek mi to hodilo aplikace RANDR hack (krandrinithack) spadla a vyvolala signál 11 (SIGSEGV)... Vůbec nevim co to je za aplikaci, ale asi to dobře nebude :-)

13.8.2004 14:07 ZS-Man
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

jo, tak stim ti neporadim......nevim.....:o))) A 3D akcelerace funguje? ja mam glxgear okolo 1450 fps

13.8.2004 14:33 Krakonoš | skóre: 17 | Nová Ves v Horách
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

No ale nevim jak to zjistim :-)

....kde najdu ten glxgear? :-)

13.8.2004 14:45 Pinky | skóre: 30
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

1. pust konzoli napis: su napis glxgears jinak /usr/X11R6/bin/glxgears

13.8.2004 14:51 Krakonoš | skóre: 17 | Nová Ves v Horách
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

Jo, mám to *1*.... mám pušttenej XMMS a mozilla firefox a mam tam 80fps (takovy maly okynko) :-D

....a kdyz to dam na plnou obrazovku, tak tam mam jenom 17 :(... tže to moc na hardware akceleraci nevypadá :-D

16.8.2004 08:58 ZS-Man
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

Zkontroluj si nastaveni jadra. Jestli bude OK, budes mit natazeny ty moduly a zkonfigurovanej ovladac, tak to musi frcet :o))))

13.8.2004 14:56 ZS-Man
Rozbalit Rozbalit vše Re: Radeon 9200 pod Knoppixem 3.4

hlavne to taky skuz bez toho su , jestli ti to bezi i pod userem. Jinak si budes muset nastavit prava.

Dalsi prikazy: glxinfo , fglrxinfo

Založit nové vlákno • Nahoru

Tiskni Sdílej: