Dotaz: Netscroll Optical na jadre 2.6.x

[Zdenek Stryhal]

Snazim se zprovoznit kolecko mysi NetScroll Optical USB na jadre 2.6.x. Nastaveni ruznych protokolu nema zadny vliv. Problem je zrejme v jadre, nebot "cat /dev/mouse" nedava zadny vystup pri pouziti kolecka a bocnich tlacitek. Zkousel jsem take pri bootu predat jadru "psmouse.proto=imps", coz ma udajne nastavit chovani jadra jako 2.4.x, ale opet bez zjevneho ucinku. Na jadre 2.4.x pracuje vse normalne.

Znate nekdo spravne nastaveni ovladace v jadre, respektive reseni meho problemu?

Diky

Odpovědi

[dumi]

dobry den

podivejte se do konfiguracniho souboru Xserveru, jestli mate v sekci mouse takovyto radek:
Option "ZAxisMapping" "4 5"

[Zdenek Stryhal]

Ano, toto nastaveni mam. S timto nastavenim to fungovalo na jadrech 2.4. V nastaveni X asi problem neni. I pokud by nastaveni X bylo spatne, mys by myslim mela posilat signaly o udalostech a ty by meli jit cist ze zarizeni "/dev/mouse". To se vsak u tlacitek 4 az 7 nedeje.

[dumi]

Dobra, zkuste se tedy podivat do konfigurace jadra a to do sekce Device Drivers -> Input device support, tam najdete Mouse interface, ja mam zaskrtnuto Provide legacy /dev/psaux device, a dale se podivat na Mice (o neco nize), kde mam zaskrtnuto PS/2. mam sice mys o Dexxy, ale kolecko me funguje s timto nastavenim.

[Zdenek Stryhal]

V konfiguraci jadra "Provide legacy /dev/psaux device" zaskrtnute nemam, protoze se v helpu pise, ze se tim vytvori zarizeni /dev/psaux s naprosto stejnym obsahem jako /dev/input/mice. Skusim to zmenit, treba to pomuze.

CONFIG_MOUSE_PS2 mam povoleno.

[Vojta Pichl]

Zkuste:

Option "Protocol" "ExplorerPS/2"

mi to pomohlo.

[Zdenek Stryhal]

Zmena protokolu me nepomaha. X server totiz patrne nedostava zadne signaly z tlacitek 4-7.

[Libor Klepac]

kam ukazuje /dev/mouse ?? zkus misto toho /dev/input/mice ...tam se "projevujou" vsechny pripojene mysi

[Zdenek Stryhal]

/dev/mouse je link na /dev/input/mice

[Libor Klepac]

ach....uz mlcim ...btw podival jsem se na spodek mysi a mam ji taky a beha ok ...sekce mysi mam

Section "InputDevice"
        Identifier      "Mouseusb"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
#       Option          "Protocol"              "ExplorerPS/2"
       Option          "Protocol"              "IMPS/2"
        Option          "Name"                  "AutoDetected"
        Option          "Vendor"                "AutoDetected"
        Option          "CorePointer"
        #Option         "SendCoreEvents"        "yes"
        Option          "ButtonNumber"          "7"
        Option          "ZAxisMapping"          "4 5"
EndSection

[jm]

Jak vypada presne prislusna cast konfiguracniho souboru X-ek? Mozna by to bylo lepsi nez takovehle tapani. Mate jadro nastaveno takhle?

CONFIG_USB_KBD is not set
CONFIG_USB_MOUSE is not set

[Zdenek Stryhal]

Vami uvadene volby v konfiguracnim souboru jadra vubec pritomne nemam, zrejme protoze mam nastaveno CONFIG_USB_HID=y, coz je "full HID support" a zahrnuje patrne obe uvedene jako "=y".

Cast konfiguracniho souboru X:

Identifier "Mouse1"

Driver "mouse"

#Option "Protocol" "ImPS/2"

Option "Protocol" "ExplorerPS/2"

Option "ButtonNumber" "7"

Option "ZAxisMapping" "4 5"

Option "Device" "/dev/input/mice"

[jm]

No pokud zahrnuje obe uvedene jako Y, tak to je uplne spatne a to kolecko nebude fungovat nikdy.

CONFIG_USB_MOUSE:

Say Y here only if you are absolutely sure that you don't want
to use the generic HID driver for your USB mouse and prefer
to use the mouse in its limited Boot Protocol mode instead.

This is almost certainly not what you want.

This code is also available as a module ( = code which can be
inserted in and removed from the running kernel whenever you want).
The module will be called usbmouse.o. If you want to compile it as
a module, say M here and read Documentation/modules.txt.

If even remotely unsure, say N.

[Zdenek Stryhal]

Tezko rict jestli jsou jako Y nebo N, nejsou vubec Zkusim nepouzit full HID a nastavit je potom jako N.