Administrace komentářů

Zdravim, mam notebook ASUS A6km, na nem mam gentoo. Problem je s pomalou praci s diskem (hdparm rika asi 2MB/s) myslim si, ze je to DMA, nevim totiz jaky modul spravne pouzit pro muj chipset. Pouzil jsem sis5513, ale jak rikam disk je pomaly, hdparm pise ze pouziva udma5(zmenou na nizsi se nic nemeni). Pokud by nekdo vedel, jak zlepsit vykon, nebo ma zkusenosti s timto notebookem/chipsetem prosim pomozte mi a postnete radu.
Dekuju

dmesg | grep -i IDE
ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
Probing IDE interface ide0...
Probing IDE interface ide1...
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
SIS5513: IDE controller at PCI slot 0000:00:02.5
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
SIS5513: port 0x01f0 already claimed by ide0
SIS5513: port 0x0170 already claimed by ide1
SIS5513: neither IDE port enabled (BIOS)

Vypis hdparmu:
hdparm -i /dev/hda
/dev/hda:

Model=HTS541080G9AT00, FwRev=MB4OA60A, SerialNo=MPB4LAX6HZH8KM
Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs }
RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4
BuffType=DualPortCache, BuffSize=7539kB, MaxMultSect=16,
MultSect=16
CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=156301488
IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 udma4 *udma5
AdvancedPM=yes: mode=0x80 (128) WriteCache=enabled
Drive conforms to: ATA/ATAPI-6 T13 1410D revision 3a:
ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5 ATA/ATAPI-6

* signifies the current active mode