Administrace komentářů

Zdravim,

dnes jsem dostal tento router a nejak mi nefacha poradne ping. Tak zkousim neuspesne prepnout tenhle router do modu Bridging. Zatim pise jen Routing and Bridging a dhclient porad dostane IP a jde surfit.

verze modemu:

cijoml@notas:~$ telnet 10.0.0.138
Trying 10.0.0.138...
Connected to 10.0.0.138.
Escape character is '^]'.

                         *******************
                         Welcome to Viking
                         *******************

GlobespanVirata Inc., Software Release 3.C50CZT4.8122B/21041001a4
Copyright (c) 2001-2003 by GlobespanVirata, Inc.

login: [SSL not available]
                          admin
password:
Login Successful
$get system

Model       : Viking
Name        :
Domain Name :
Description : DSL Modem
Location    : GlobespanVirata Inc.,100 Schulz Drive, Red Bank,NJ 07701,U.S.A
Contact     : GlobespanVirata Inc.,100 Schulz Drive, Red Bank,NJ 07701,U.S.A
Vendor      : GlobespanVirata Inc.,100 Schulz Drive, Red Bank,NJ 07701,U.S.A
LogThreshold: 1
Object-id   : 1.3.6.1.4.1.50000
HwVersion   : 810020
SwVersion   : 3.C50CZT4.8122B/21041001a4
DSL Version : Y.1.28.54
System Time : Thu Jan 01 02:40:32 1970
Time Zone   : GMT
DST         : Off
Services    : physical datalink internet end-to-end applications
UpTime(HH:MM:SS)     : 0:19:24
Backup Interval      : Disable

Firmware se z toho dostane tak, ze se vypne zabezpeceni (nastavi na none) a udela ftp 10.0.0.138 a nasledne

cijoml@notas:~$ ftp 10.0.0.138
Connected to 10.0.0.138.
220 FTP Server (Version 1.0) ready.
Name (10.0.0.138:cijoml): admin
331 User name okay, need password.
Password:
230 User logged in, proceed.
Remote system type is WINDOWS.
ftp> get teimage.bin
local: teimage.bin remote: teimage.bin
200 Command okay.
150 File status okay; about to open data connection.
WARNING! 6367 bare linefeeds received in ASCII mode
File may not have transferred correctly.
226 Closing data connection.  Requested file action successful.
2153184 bytes received in 6.54 secs (321.7 kB/s)
ftp> quit
221 Service closing control connection.  Logged out if appropriate.

To kdyby nekdo mel novejsi firmware nez ja, ze bychom vymenili. Takze bych poprosil dobre duse, zdali by neporadily jak to prepnout ciste do bridgovani a nasledne jak na ten pppd.