Administrace komentářů

22:15:54.931039 xid:cmd 8e9840a6 > ffffffff S=6 s=0 (14)
22:15:55.019050 xid:cmd 8e9840a6 > ffffffff S=6 s=1 (14)
22:15:55.103057 xid:rsp 8e9840a6 < 00000d60 S=6 s=1 Nokia 6230i hint=b125 [ PnP Modem Fax Telephony
IrCOMM IrOBEX ] (28)
22:15:55.107059 xid:cmd 8e9840a6 > ffffffff S=6 s=2 (14)
22:15:55.195066 xid:cmd 8e9840a6 > ffffffff S=6 s=3 (14)
22:15:55.283075 xid:cmd 8e9840a6 > ffffffff S=6 s=4 (14)
22:15:55.371086 xid:cmd 8e9840a6 > ffffffff S=6 s=5 (14)
22:15:55.459094 xid:cmd 8e9840a6 > ffffffff S=6 s=* linuxsim hint=0400 [ Computer ] (24)

# Set your startup settings for irattach, the IrDA-daemon, here.

# Set this to 'false' if you do not need to start irattach. Otherwise set it
# to 'true'.
ENABLE="true"

# Set this to 'false' if you do not want automatic discovery of irda devices.
# If 'true', it will automatically start irattach if devices are found.
AUTOMATIC="false"

# Set discovery mode which usually is a good idea for finding other devices.
# If set 'true' or 'false' irattach and sysctl are used to enable and disable
# discovery mode. By default discover mode is disabled.
DISCOVERY="true"

# Set IRDA device to access (e.g. /dev/ttyS1 or irda0).
# In case of irda0, the proper module for FIR-mode has to be set in
# /etc/modutils/irda-utils (2.4) or /etc/modprobe.d/irda-utils (2.6)
DEVICE="/dev/ttyS0"

# Set dongle type, e.g. none, tekram, esi, actisys, actisys+, ep7211, girbil,
# litelink, airport, old_belkin, mcp2120, act200l, ma600). You do not need
# a dongle for FIR mode.
DONGLE="ma600"

# Set the serial device to quiet with setserial. This is only useful on some
# machines in FIR-mode, so most people should leave it blank. See 
# README.Debian for more information.
SETSERIAL=""