Administrace komentářů

takže za :
0. děkuji za Vaši ochotu
1. save config + reboot jsem udělal
2. recreate database taky, menu mám v pořádku, grafy se zobrazují,
data jsou nolová 3. v adresáři /var/rrd/data mám soubory qos_110.rrd až qos_120.rrd,
inout.rrd a lq.rrd jsou tam taky.


výpis /etc/rrd.config :

#!/bin/sh
#
# RRDstats monitoring configuration file
# created 2004 Dolly (dolly@czi.cz)
# licensed under GPL

#############################################################################
# WARNING: If you change any of update intervals, you have to build
new #
# RRD databases with /var/rrd/script/rrd.create
# #############################################################################

# default http port
RRD_ENABLED=YES

# Maximum speeds, helps to track counter restarts, please set
accordingly
# (2x of 3x of your line speed)
# values in bytes/sec (10Mbit / 10Mbit)

RRD_MAX_DOWNSTREAM=1310720
RRD_MAX_UPSTREAM=1310720

####################################
##### IN/OUT Specific settings #####
####################################

# Internet device name, it tries to setup automaticaly using your net
subsystem
# state or coyote.cfg. If it does not work for you, please set manualy
and let
# me know what network configuration are you using.
RRD_INOUT_DEVICE=$IF_INET

# RRD update interval for IN/OUT statistics. Do NOT change, unless you
know
# what you are doing.
RRD_INOUT_UPDATEINTERVAL=20


##########################################
##### Link quality specific settings #####
##########################################

# RRD update interval for link quality statistics. Do NOT change,
unless you know
# what you are doing.
RRD_LQ_UPDATEINTERVAL=60

# Gateway IP address. This should be first public IP address in your
traceroute
# (on some ppp connections the address does not have to be public).
This address
# is used in firt hop link quality measurements.
#
# you can find it like this.
# coyote# traceroute www.google.com
# traceroute to www.google.akadns.net (66.102.11.99)
# 1 ac2.mistral.cz (62.24.94.2)
# 2 1hopsem-v103.dkm.cz (62.24.68.81) # ...
RRD_LQ_GATEWAY=192.168.1.1

# Number of ping probes. How many ping probes are sent for latency and
packet
# loss measurements. Do NOT set much higher than 30, it has to
complete within
# lq_updateinterval which is by default 60 seconds.
RRD_LQ_NUMPINGS=30

#################################
##### QOS specific settings #####
#################################

# QOS tracking enabled
RRD_QOS_ENABLED=yes

# QOS graphing is more dificult to setup. First you need my QOS-init
scripts
# with some classes setuped by define_class_qos. For such classes you
can
# use theese graphing capabilities.
#
# 1) specify create and fetch commands for every QOS database.
# 2) edit /var/rrd/www/... acordingly to show your QOS statistics

# RRD update interval for QOS. Do NOT change unless you know what you
are
# doing.
RRD_QOS_UPDATEINTERVAL=60


# Override default values from coyote.conf
if [ -z "$CONFIG_LOADED" ]; then
. /etc/coyote/coyote.conf
fi

# Load net subsystem state if possible
if [ -e /tmp/netsubsys.state ]; then
. /tmp/netsubsys.state
fi

# default values
if [ -z "$RRD_HTTP_PORT" ]; then
RRD_HTTP_PORT=8080
fi
if [ -z "$RRD_INOUT_DEVICE" ]; then
RRD_INOUT_DEVICE=$IF_INET
fi
if [ -z "$RRD_MAX_DOWNSTREAM" ]; then
RRD_MAX_DOWNSTREAM=1310720
fi
if [ -z "$RRD_MAX_UPSTREAM" ]; then
RRD_MAX_UPSTREAM=1310720
fi
if [ -z "$RRD_LQ_GATEWAY" ]; then
RRD_LQ_GATEWAY=127.0.0.1
fi


# set rrd default values
RRD=/bin/rrdtool
RRD_DBDIR=/var/rrd/data/

# !!! Do NOT change database names unless you now what you are doing
!!!
# IN/OUT statistics database name
RRD_DB_INOUT=inout.rrd
# Link quality statistics database name
RRD_DB_LQ=lq.rrd


#########################################################################
## RRD creation qos entry point
## define QOS databases here
##
## syntax:
## create_qos_database qosdbname
##
## example:
## create_qos_database "qos_110.rrd"
##
## - creates QOS RRD database with name qos_110.rrd
#########################################################################
create_qos_sources () {

create_qos_database "qos_110.rrd"
create_qos_database "qos_111.rrd"
create_qos_database "qos_112.rrd"
create_qos_database "qos_113.rrd"
create_qos_database "qos_114.rrd"
create_qos_database "qos_115.rrd"
create_qos_database "qos_116.rrd"
create_qos_database "qos_117.rrd"
create_qos_database "qos_118.rrd"
create_qos_database "qos_119.rrd"

return
}

#########################################################################
## QOS query entry point
## define which QOS classes to read
##
## syntax:
## fetch_qos rootclas qosdbname
##
## example:
## fetch_qos "1:10" "qos_110.rrd"
##
## - read data for root class 1:10 (define_class_qos in qos.config)
## - fetch data from sfq classes 110:, 111:, 112: to qos_110.rrd
#########################################################################
query_qos_sources () {

fetch_qos "1:10" "qos_110.rrd"
fetch_qos "1:10" "qos_111.rrd"
fetch_qos "1:10" "qos_112.rrd"
fetch_qos "1:10" "qos_113.rrd"
fetch_qos "1:10" "qos_114.rrd"
fetch_qos "1:10" "qos_115.rrd"
fetch_qos "1:10" "qos_116.rrd"
fetch_qos "1:10" "qos_117.rrd"
fetch_qos "1:10" "qos_118.rrd"
fetch_qos "1:10" "qos_119.rrd"
return
}