Administrace komentářů

# hwinfo --netcard
29: PCI 200.0: 0200 Ethernet controller
  [Created at pci.300]
  UDI: /org/freedesktop/Hal/devices/pci_11ab_4364
  Unique ID: B35A.NTLCk973Ir6
  Parent ID: HnsE.b2HeBu2fNjB
  SysFS ID: /devices/pci0000:00/0000:00:1c.5/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "SysKonnect Ethernet controller"
  Vendor: pci 0x11ab "Marvell Technology Group Ltd."
  Device: pci 0x4364
  SubVendor: pci 0x1148 "SysKonnect"
  SubDevice: pci 0x4340
  Revision: 0x12
  Memory Range: 0xff7fc000-0xff7fffff (rw,non-prefetchable)
  I/O Ports: 0x9800-0x98ff (rw)
  Memory Range: 0xff7c0000-0xff7dffff (ro,prefetchable,disabled)
  IRQ: 10 (no events)
  Module Alias: "pci:v000011ABd00004364sv00001148sd00004340bc02sc00i00"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #17 (PCI bridge)

33: PCI 504.0: 0200 Ethernet controller
  [Created at pci.300]
  UDI: /org/freedesktop/Hal/devices/pci_11ab_4320
  Unique ID: JNkJ.FjMv6GbsXF7
  Parent ID: 6NW+.NiX3vIdArFF
  SysFS ID: /devices/pci0000:00/0000:00:1e.0/0000:05:04.0
  SysFS BusID: 0000:05:04.0
  Hardware Class: network
  Model: "ASUSTeK Marvell 88E8001 Gigabit Ethernet Controller (Asus)"
  Vendor: pci 0x11ab "Marvell Technology Group Ltd."
  Device: pci 0x4320 "88E8001 Gigabit Ethernet Controller"
  SubVendor: pci 0x1043 "ASUSTeK Computer Inc."
  SubDevice: pci 0x811a "Marvell 88E8001 Gigabit Ethernet Controller (Asus)"
  Revision: 0x14
  Driver: "sk98lin"
  Device File: eth1
  Memory Range: 0xff9f4000-0xff9f7fff (rw,non-prefetchable)
  I/O Ports: 0xb800-0xb8ff (rw)
  Memory Range: 0x50000000-0x5001ffff (ro,prefetchable,disabled)
  IRQ: 225 (44807 events)
  HW Address: 00:17:31:68:6c:69
  Link detected: no
  Module Alias: "pci:v000011ABd00004320sv00001043sd0000811Abc02sc00i00"
  Driver Info #0:
    Driver Status: sk98lin is active
    Driver Activation Cmd: "modprobe sk98lin"
  Driver Info #1:
    Driver Status: skge is active
    Driver Activation Cmd: "modprobe skge"
  Config Status: cfg=no, avail=yes, need=no, active=unknown
  Attached to: #22 (PCI bridge)