Administrace komentářů

Hello.

kupil som si novy disk hitachi travelstar 5k100 80GB 2.5" ako nahradu za stary. zda sa ze bios (kernel?) zle detekuje jeho geometriu tak ju nastavujem pomocou parametra 'hda' pri boote.

pri defaultnej geometrii disk skoro neslo pouzit pre haldu chyb (zrejme nasledok poziadavkov na neexistujuce sektory).

odkedy je nastavena rucne errory zmizli, ale vysktli sa ine problemy... disk uplne zufalo pomaly cita data zo seba, pricom ledka neustale svieti, na gkrellm to vyzera tak, ze precita normalne zhruba 50MB a potom padne na 0-260KB.... ale zapis je v poho...

vypis z bonnie:
              -------Sequential Output-------- ---Sequential Input-- --Random--
              -Per Char- --Block--- -Rewrite-- -Per Char- --Block--- --Seeks---
Machine    MB K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU K/sec %CPU  /sec %CPU
          250  8216 95.3 22825 30.0   288  0.3   178  1.9   411  0.2  63.4  0.8


vypis z bonnie++:

Version 1.93c       ------Sequential Output------ --Sequential Input- --Random-
Concurrency   1     -Per Chr- --Block-- -Rewrite- -Per Chr- --Block-- --Seeks--
Machine        Size K/sec %CP K/sec %CP K/sec %CP K/sec %CP K/sec %CP  /sec %CP
habibi-halua   368M   133  98 18858  26   197   0   508  98   139   0  13.0   0
Latency               108ms    3836ms   15790ms   43819us   21119ms    3892ms
Version 1.93c       ------Sequential Create------ --------Random Create--------
habibi-halua        -Create-- --Read--- -Delete-- -Create-- --Read--- -Delete--
              files  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP  /sec %CP
                 16   410  97 +++++ +++ 20261  67   416  98 +++++ +++  1478  93
Latency             82914us   11155us    2170us   80063us    1825us     163ms
1.93c,1.93c,habibi-halua,1,1170088515,368M,,133,98,18858,26,197,0,508,98,139,0,13.0,0,16,,,,,410,97,+++++,+++,20261,67,416,98,+++++,+++,1478,93,108ms,3836ms,15790ms,43819us,21119ms,3892ms,82914us,11155us,2170us,80063us,1825us,163ms


hdparm /dev/hda:
 multcount    = 16 (on)
 IO_support   =  3 (32-bit w/sync)
 unmaskirq    =  0 (off)
 using_dma    =  1 (on)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 geometry     = 9729/255/63, sectors = 156301488, start = 0
 
okrem tohto bezi s "-A1 -W1 -X udma2" - vyssiu udma asi nepodporuje radic. skusal som hadam vsetky kombinacie parametrov.. bezvysledne

hdparm -Tt /dev/hda:

Timing cached reads:   532 MB in  2.01 seconds = 265.22 MB/sec
Timing buffered disk reads:   58 MB in  3.04 seconds =  19.10 MB/sec

najdivnejsie na tom je ze hdparm -Tt cita disk v pohode ale akykolvek iny pokus je uplne marny.

presiel som dmesg a nevsimol som si tam nic podozrive co by sa tykalo diskov alebo radica.
lspci -v:

00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
        Flags: bus master, medium devsel, latency 48
        I/O ports at fcf0 [size=16]


niekde som cital ze by to mohlo byt skosobene zlou kabelazou, ale stary disk siel v poho a je to v notebooku takze neviem ako by som sa k nej dostal.

co s tym? :(