Administrace komentářů

Dobry den pokusim se o nastineni problematiky s moji wifi. Notebook 7400, chipset pro wireless kartu je broadcom. Pouzivam posledni verzi Kubuntu 7.4 jadro Linux kubuntu 2.6.20-16-generic. Driver je natahnutej pred ndiswrapper, orginalni z distribuce se nechytal. Ted muj problem a zaroven dotaz. Jakmile provedu suspend to ram, tak vypis z iwevent hlasi:

15:27:48.302095   eth1     Set Mode:Managed
15:27:48.302117   eth1     Set Frequency:2.422 GHz (Channel 3)
15:27:48.302136   eth1     Set ESSID:"FRITZ!Box Fon WLAN 7141"
15:28:01.339176   eth1     Set Mode:Managed
15:28:01.339199   eth1     Set Frequency:2.422 GHz (Channel 3)
15:28:01.339219   eth1     Set ESSID:"FRITZ!Box Fon WLAN 7141"
15:28:01.906462   eth1     Association Request IEs:0017465249545A21426F7820466F6E20574C414E2037313431010882848B9624B0486C210208122402010E32048C129860DD06004096010100DD09001018020
15:28:01.906513   eth1     Association Response IEs:010882848B9624B0486C32048C129860DD180050F2020101800003A4000027A4000042435E0062322F00
15:28:01.906533   eth1     New Access Point/Cell address:00:04:0E:DA:76:62
15:28:05.720511   eth1     New Access Point/Cell address:Not-Associated

Toto se opakuje nekdy treba 10 a pak se chytne, nekdy to trva dele a nedky se nechytne vubec !!. Pomuze resrtart nekdy !!! Muj postup je "ifdown eth1" "ifup eth1" pak jsem zkousel "modprobe -r ndiswrapper" a znovu ho nahodit "modprobe ndiswrapper". Nekdy to pomuze a nekdy ne, prave proto jsem z toho Matej. Kdyz se to povede, tak vysledek je super a vsechno slape jeste lepe jak pod XP

05.720511 eth1 New Access Point/Cell address:Not-Associated

Zajimalo by me jake je posloupnost navazani wifi spojeni, pokud by mi mohl nekdo objasnit jak to funguje byl bych velice vdecen. Na internetu je spousty navodu jak nastavit wpa-supplicant ale nikde neni vysvetlen poslup co konkretni veci delaji.

Muj vypis "dmesg | grep bcm"
[   19.824000] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
[   20.480000] wlan0: ethernet device 00:14:a5:e1:42:01 using NDIS driver: bcmwl5, version: 0x4640f05, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 14E4:4311.5.conf

regiss@kubuntu:~$ dmesg | grep ndis
[   19.740000] ndiswrapper version 1.38 loaded (preempt=no,smp=yes)
[   19.824000] ndiswrapper: driver bcmwl5 (Broadcom,10/12/2006, 4.100.15.5) loaded
[   19.828000] ndiswrapper: using IRQ 17
[   20.484000] usbcore: registered new interface driver ndiswrapper
[   20.588000] ndiswrapper: changing interface name from 'wlan0' to 'eth1'

Toto je vysledek po uspesnem pripojeni
eth1      IEEE 802.11g  ESSID:"FRITZ!Box Fon WLAN 7141"  Nickname:"FRITZ!Box Fon WLAN 714"
          Mode:Managed  Frequency:2.422 GHz  Access Point: 00:04:0E:DA:76:62
          Bit Rate=18 Mb/s   Tx-Power:32 dBm
          RTS thr=2347 B   Fragment thr=2346 B
          Encryption key:A52C-FD2B-6431-7685-CD7D-69E6-C292-47F5-19B1-118A-9767-2039-0C47-FA49-FB63-E2AD   Security mode:restricted
          Power Management:off
          Link Quality:23/100  Signal level:-81 dBm  Noise level:-96 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

Kdyz se nada pripojit tak je to stejny jenom bez Encryption key
eth1      IEEE 802.11g  ESSID:"FRITZ!Box Fon WLAN 7141"  Nickname:"FRITZ!Box Fon WLAN 714"
          Mode:Managed  Frequency:2.422 GHz  Access Point: 00:04:0E:DA:76:62
          Bit Rate=54 Mb/s   Tx-Power:32 dBm
          RTS thr=2347 B   Fragment thr=2346 B
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0


Nakonec jeste uvedu wpa_supplicant.conf

ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0

network={
    ssid="FRITZ!Box Fon WLAN 7141"
    proto=WPA
    key_mgmt=WPA-PSK
    pairwise=TKIP
    group=TKIP
    psk="11111111111111111"
}
psk musim zadavat jak ho mam od providera, protoze ssid je s mezerama a neda se predelat pomoci wpa_passphrse

interfece

auto lo
iface lo inet loopback
address 127.0.0.1
netmask 255.0.0.0

auto eth0
iface eth0 inet dhcp

auto eth1
iface eth1 inet dhcp
wpa-driver wext
wpa-conf /etc/wpa_supplicant.conf

#wireless-essid dd-wrt


#pre-up wpa_supplicant -Bw -Dwext -ieth1 -c/etc/wpa_supplicant.conf
#post-down killall -q wpa_supplicant


#auto eth2
#iface eth2 inet dhcp

#auto ath0
#iface ath0 inet dhcp

#auto wlan0
#iface wlan0 inet dhcp

Potreboval bych poradit se synchronizaci, kterou jsem uvadel drive na cem zalezi. Kdyz se to jednou nepovede a podruhe jo tak nechapu v cem muze byt chyba.

Po suspend to ram, se skoro nikdy nepripojim. Mohl by mi nekdo napsat postup jak nahodit wifi. Neco ve stylu 1) Ndiswrapper 2) ifup eth1 3) co killnout co restartovat atd. proste v tom mam gulas a vetsinou je to haluz ze se pripjim Dekuji za odpoved Ondra