Administrace komentářů

...

kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03e86f7>] kobject_shadow_add+0x117/0x1a0
 [<c013fba4>] mod_sysfs_setup+0x24/0xb0
 [<c0141458>] sys_init_module+0x1648/0x1940
 [<c0102ae8>] syscall_call+0x7/0xb
 [<c0710000>] __mutex_lock_slowpath+0x40/0x90
 =======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03e86f7>] kobject_shadow_add+0x117/0x1a0
 [<c013fba4>] mod_sysfs_setup+0x24/0xb0
 [<c0141458>] sys_init_module+0x1648/0x1940
 [<c0102ae8>] syscall_call+0x7/0xb
 [<c0710000>] __mutex_lock_slowpath+0x40/0x90
 =======================
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03e86f7>] kobject_shadow_add+0x117/0x1a0
 [<c013fba4>] mod_sysfs_setup+0x24/0xb0
 [<c0141458>] sys_init_module+0x1648/0x1940
 [<c0102ae8>] syscall_call+0x7/0xb
 [<c0710000>] __mutex_lock_slowpath+0x40/0x90
 =======================
kobject_add failed for uhci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03e86f7>] kobject_shadow_add+0x117/0x1a0
 [<c013fba4>] mod_sysfs_setup+0x24/0xb0
 [<c0141458>] sys_init_module+0x1648/0x1940
 [<c0102ae8>] syscall_call+0x7/0xb
 [<c0710000>] __mutex_lock_slowpath+0x40/0x90
 =======================
kobject_add failed for ehci_hcd with -EEXIST, don't try to register things with the same name in the same directory.
 [<c03e86f7>] kobject_shadow_add+0x117/0x1a0
 [<c013fba4>] mod_sysfs_setup+0x24/0xb0
 [<c0141458>] sys_init_module+0x1648/0x1940
 [<c0102ae8>] syscall_call+0x7/0xb
 =======================
i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by kernel)
intel_rng: FWH not detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: Attached scsi generic sg1 type 0
sd 4:0:0:0: Attached scsi generic sg2 type 0
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x7060)
iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)

....

ata3.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x2 frozen
ata3.00: cmd 61/08:00:bf:31:0f/00:00:00:00:00/40 tag 0 cdb 0x0 data 4096 out
         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata3: soft resetting port
ata3: softreset failed (port busy but CLO unavailable)
ata3: softreset failed, retrying in 5 secs
ata3: hard resetting port
ata3: port is slow to respond, please be patient (Status 0x80)
ata3: port failed to respond (30 secs, Status 0x80)
ata3: COMRESET failed (device not ready)
ata3: hardreset failed, retrying in 5 secs
ata3: hard resetting port
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: configured for UDMA/133
ata3: EH complete
SCSI device sdc: 312581808 512-byte hdwr sectors (160042 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal

...