Administrace komentářů

tak uz mi to +- funguje (teda ve skype integrovany mikrofon funguje, v gnome ne... :)

problem byl ve zvukovem serveru pulseaudio ... zjistil sem ze kdyz ho vypnu tak mi vsechno pekne funguje pres alsu, ale kdyz ho zapnu tak se to tak neak mlati ... a z neakeho duvodu je zvukovy server pulseaudio soucasti gnome ....

tak sem hledal a hledal, zkousel a hledal ....a trosku neciste reseni, ale :o)

a jestli to nekoho zajima tak sem to nastavil takto

cat /etc/asound.names

pcm.!default {
        type pulse
}

ctl.!default {
        type pulse
}
pcm.pulse {
    type pulse
}
ctl.pulse {
    type pulse
}
rawmidi {
}
timer {
}
seq {
        alsactl1 {
                name default
                comment 'Default Device - Sequencer (Duplex)'
        }
        alsactl2 {
                name hw
                comment 'Physical Device - Sequencer (Duplex)'
        }
}

a samotny pulseaudio cat /etc/pulse/default.pa

 
#!/usr/bin/pulseaudio -nF 

#
# This file is part of PulseAudio.
#
# PulseAudio is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# PulseAudio is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
# General Public License for more details.
#
# You should have received a copy of the GNU Lesser General Public License
# along with PulseAudio; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.


### Load audio drivers statically
load-module module-alsa-sink
#load-module module-alsa-source 
#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#load-module module-null-sink
#load-module module-pipe-sink

.ifexists /usr/lib/pulse-0.9/modules/module-hal-detect.so

### Automatically load driver modules depending on the hardware available
#load-module module-hal-detect

.else

### Alternatively use the static hardware detection module (for systems that
### lack HAL support
#load-module module-detect

.endif

### Load audio drivers automatically on access
#add-autoload-sink output module-oss device="/dev/dsp" sink_name=output source_name=input
#add-autoload-source input module-oss device="/dev/dsp" sink_name=output source_name=input
#add-autoload-sink output module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#add-autoload-source input module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
#add-autoload-sink output module-alsa-sink device=default sink_name=output 
#add-autoload-source input module-alsa-source device=default source_name=input 

.ifexists /usr/lib/pulse-0.9/modules/module-esound-protocol-unix.so

### Load esound protocol
load-module module-esound-protocol-unix

.endif

### Load native protocol
load-module module-native-protocol-unix

### Network access (may be configured with paprefs, so leave this commented
### here if you plan to use paprefs)
#load-module module-esound-protocol-tcp
#load-module module-native-protocol-tcp
#load-module module-zeroconf-publish

### Load the RTP reciever module (also configured via paprefs, see above)
#load-module module-rtp-recv

### Load the RTP sender module (also configured via paprefs, see above)
#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 description="RTP Multicast Sink"
#load-module module-rtp-send source=rtp.monitor

### Automatically restore the volume of playback streams
load-module module-volume-restore

### Automatically move streams to the default sink if the sink they are
### connected to dies, similar for sources
load-module module-rescue-streams

### Make some devices default
#set-default-sink output
#set-default-source input

.nofail

### Load something to the sample cache
load-sample x11-bell /usr/share/sounds/gtk-events/activate.wav
#load-sample-dir-lazy /usr/share/sounds/*.wav

### Load X11 bell module
load-module module-x11-bell sample=x11-bell

### Publish connection data in the X11 root window
load-module module-x11-publish

### Load additional modules from GConf settings. This can be configured with the paprefs tool.
### Please keep in mind that the modules configured by paprefs might conflict with manually
### loaded modules.
load-module module-gconf

a vysledek tohodle vseho ... funguje mi integrovany mikrofon :)