Administrace komentářů

Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

Příspěvek

17.10.2007 11:25 atan | skóre: 21 | Liberec
Rozbalit Rozbalit vše Re: RAID1 se porad synchronizuje

nemuze to byt spis ovladacem? SMART vypada v pohode:

smartctl -a /dev/sda

smartctl version 5.37 [x86_64-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD3200YS-01PGB0
Serial Number:    WD-WCAPD1899057
Firmware Version: 21.00M21
User Capacity:    320,072,933,376 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Wed Oct 17 11:22:05 2007 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x84) Offline data collection activity
                                        was suspended by an interrupting command from host.
                                        Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0) The previous self-test routine completed
                                        without error or no self-test has ever
                                        been run.
Total time to complete Offline
data collection:                 (9600) seconds.
Offline data collection
capabilities:                    (0x7b) SMART execute Offline immediate.
                                        Auto Offline data collection on/off support.
                                        Suspend Offline collection upon new
                                        command.
                                        Offline surface scan supported.
                                        Self-test supported.
                                        Conveyance Self-test supported.
                                        Selective Self-test supported.
SMART capabilities:            (0x0003) Saves SMART data before entering
                                        power-saving mode.
                                        Supports SMART auto save timer.
Error logging capability:        (0x01) Error logging supported.
                                        General Purpose Logging supported.
Short self-test routine
recommended polling time:        (   2) minutes.
Extended self-test routine
recommended polling time:        ( 111) minutes.
Conveyance self-test routine
recommended polling time:        (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       3
  3 Spin_Up_Time            0x0003   192   191   021    Pre-fail  Always       -       5375
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       8
  5 Reallocated_Sector_Ct   0x0033   199   199   140    Pre-fail  Always       -       1
  7 Seek_Error_Rate         0x000f   200   200   051    Pre-fail  Always       -       0
  9 Power_On_Hours          0x0032   095   095   000    Old_age   Always       -       3887
 10 Spin_Retry_Count        0x0013   100   253   051    Pre-fail  Always       -       0
 11 Calibration_Retry_Count 0x0013   100   253   051    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       8
194 Temperature_Celsius     0x0022   120   001   000    Old_age   Always       -       30
196 Reallocated_Event_Count 0x0032   199   199   000    Old_age   Always       -       1
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       32
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       32
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 72 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 72 occurred at disk power-on lifetime: 3886 hours (161 days + 22 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 00 24 62 08 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 23 62 08 03 08   1d+18:23:37.727  READ FPDMA QUEUED
  60 08 00 1b 62 08 03 08   1d+18:23:37.727  READ FPDMA QUEUED
  60 08 00 13 62 08 03 08   1d+18:23:37.727  READ FPDMA QUEUED
  60 08 00 0b 62 08 03 08   1d+18:23:37.726  READ FPDMA QUEUED
  60 08 00 03 62 08 03 08   1d+18:23:37.726  READ FPDMA QUEUED

Error 71 occurred at disk power-on lifetime: 3886 hours (161 days + 22 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 00 24 62 08 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 53 5e 08 03 08   1d+18:23:35.767  READ FPDMA QUEUED
  60 00 00 53 5c 08 03 08   1d+18:23:35.764  READ FPDMA QUEUED
  60 00 00 53 58 08 03 08   1d+18:23:35.756  READ FPDMA QUEUED
  60 00 00 53 54 08 03 08   1d+18:23:35.748  READ FPDMA QUEUED
  60 80 00 d3 52 08 03 08   1d+18:23:35.745  READ FPDMA QUEUED

Error 70 occurred at disk power-on lifetime: 3886 hours (161 days + 22 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 00 5e 66 6f 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 5e 66 6f 1e 08   1d+18:15:37.796  READ FPDMA QUEUED
  ea 00 00 00 00 00 00 00   1d+18:15:37.772  FLUSH CACHE EXIT
  61 08 00 d3 b9 e3 03 08   1d+18:15:37.771  WRITE FPDMA QUEUED
  ea 00 00 00 00 00 00 00   1d+18:15:37.771  FLUSH CACHE EXIT
  60 80 00 de 71 6f 1e 08   1d+18:15:37.743  READ FPDMA QUEUED

Error 69 occurred at disk power-on lifetime: 3886 hours (161 days + 22 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 00 56 66 6f 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 08 00 56 66 6f 1e 08   1d+18:15:35.845  READ FPDMA QUEUED
  60 08 00 4e 66 6f 1e 08   1d+18:15:35.845  READ FPDMA QUEUED
  60 08 00 46 66 6f 1e 08   1d+18:15:35.845  READ FPDMA QUEUED
  60 08 00 3e 66 6f 1e 08   1d+18:15:35.845  READ FPDMA QUEUED
  60 08 00 36 66 6f 1e 08   1d+18:15:35.845  READ FPDMA QUEUED

Error 68 occurred at disk power-on lifetime: 3886 hours (161 days + 22 hours)
  When the command that caused the error occurred, the device was doing SMART Offline or Self-test.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  10 51 00 5e 66 6f 40

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  60 00 00 5e 66 6f 1e 08   1d+18:15:33.866  READ FPDMA QUEUED
  27 00 00 00 00 00 00 00   1d+18:15:33.866  READ NATIVE MAX ADDRESS EXT
  ec 00 00 00 00 00 00 00   1d+18:15:33.865  IDENTIFY DEVICE
  ef 03 46 00 00 00 00 00   1d+18:15:33.865  SET FEATURES [Set transfer mode]
  27 00 00 00 00 00 00 00   1d+18:15:33.836  READ NATIVE MAX ADDRESS EXT

SMART Self-test log structure revision number 1
No self-tests have been logged.  [To run self-tests, use: smartctl -t]


SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

Offtopic diskuse použijte pro diskusi mimo záběr našeho portálu (včelařství, windows), která by měla být smazána.
Duplicitní diskuse je určena pro případ, kdy uživatel odeslal svůj dotaz několikrát.
Návrh na cenzuru použijte, pokud komentář obsahuje urážky, vulgarismy nebo porušuje zákony.
Návrh na smazání komentáře je velmi neobvyklá akce používaná obvykle při nepovolené reklamě či spamu, výkřicích psychicky nemocných jedinců (ještírci) nebo pro smazání duplikátních komentářů.
Oprava formátování je žádost pro úpravu formy příspěvku, například pokud někdo píše bez odstavců nebo použije PRE pro celý komentář. Žádosti o změnu obsahu budou zamítnuty.

Vaše jméno
Váš email
Typ požadavku

Slovní popis