Administrace komentářů

Zdravim vsechny, snazim se modem pripojit uz nekolik dnu. Pouzivam Ubuntu 7.10 a dostal jsem se do stadia, kdy mi vytvori ttyUSB0 a 1:

Apr 18 08:13:51 laptop01 kernel: [ 1753.700000] usb 5-2: new full speed USB device using uhci_hcd and address 2
Apr 18 08:13:51 laptop01 kernel: [ 1753.864000] usb 5-2: configuration #1 chosen from 1 choice
Apr 18 08:13:51 laptop01 kernel: [ 1753.900000] usbserial_generic 5-2:1.0: generic converter detected
Apr 18 08:13:51 laptop01 kernel: [ 1753.900000] usb 5-2: generic converter now attached to ttyUSB0
Apr 18 08:13:51 laptop01 kernel: [ 1753.988000] usbserial_generic 5-2:1.1: generic converter detected
Apr 18 08:13:51 laptop01 kernel: [ 1753.988000] usb 5-2: generic converter now attached to ttyUSB1

Potom jsem zkousel jak rucne tak pres gnome ppp, ktery mi dokonce modem detekoval, pripojeni, ale bez uspechu. Modem se na displeji tvari, jako ze se snazi pripojovat. V logu se objevuje toto:

/home/servis/.wvdial.conf Warn: Ignoring malformed input line: ";Do NOT edit this file by hand!"
WvDial<*1>: WvDial: Internet dialer version 1.56
WvModem<*1>: Cannot get information for serial port.
WvDial<*1>: Initializing modem.
WvDial<*1>: Sending: ATX3
WvDial Modem<*1>: ATX3
WvDial Modem<*1>: OK
WvDial<*1>: Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
WvDial Modem<*1>: OK
WvDial<*1>: Modem initialized.
WvDial<*1>: Sending: ATM1L3DT#777
WvDial<*1>: Waiting for carrier.
WvDial Modem<*1>: ATM1L3DT#777
WvDial Modem<*1>: CONNECT
WvDial<*1>: Carrier detected.  Waiting for prompt.
WvDial Err: Connected, but carrier signal lost!  Retrying...
WvDial<*1>: Sending: ATM1L3DT#777
WvDial<*1>: Waiting for carrier.
WvDial Modem<*1>: ~[7f]}#@!}!}!} }9}"}&} } } } }#}%B#}%}%}&O!cB}'}"}(}"=o~~[7f]}#@!}!}"} }9}"}&} } } } }#}%B#}%}%}&O!cB}'}"}(}"q}"~~[7f]}#@!}!}#} }9}"}&} } } } }#}%B#}%}%}&O!cB}'}"}(}"5Y~~[7f]}#@!}!}$} }9}"}&} } } } }#}%B#}%}%}&O!cB}'}"}(}"xQ~~[7f]}#@!}!}%} }9}"}&} } } } }#}%B#}%}%}&O!cB}'}"}(}"<
WvDial Modem<*1>: ~~[7f]}#@!}!}&} }9}"}&} } } } }#}%B#}%}%}&O!cB}'}"}(}"pg~~[7f]}#@!}!}'} }9}"}&} } } } }#}%B#}%}%}&O!cB}'}"}(}"4<~~[7f]}#@!}!}(} }9}"}&} } } } }#}%B#}%}%}&O!cB}'}"}(}"{}^~~[7f]}#@!}!})} }9}"}&} } } } }#}%B#}%}%}&O!cB}'}"}(}"?%~~[7f]}#@!}!}*} }9}"}&} } } } }#}%B#}%}%}&O!cB}'}"}(}"sH~
WvDial Modem<*1>: $QCMTI: ALIVE
WvDial Modem<*1>: $QCMTI: ALIVE
WvDial Modem<*1>: $QCMTI: ALIVE
WvDial Modem<*1>: $QCMTI: ALIVE
WvDial Modem<*1>: $QCMTI: ALIVE
...

Vzhledem k tomu, ze nejsem zadny odbornik, tak presne netusim, jestli se z toho co se deje pri pripojovani da odhalit pripadny problem a provest pripadne upravu nekterych konfiguracnich souboru.

Dekuji za pripadne rady