Administrace komentářů

Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

Příspěvek

16.12.2007 12:16 Pavel
Rozbalit Rozbalit vše Re: Notebook pravidelne zatuhava

Vcera jsem preinstaloval z Opensuse 10.2 na 10.3. Na 10.2 notebook fungoval normalne, zadne problemy s diskem nebyly. Ty se objevily opravdu az po instalaci 10.3. Ale vypis prikladam, vubec mu nerozumim.

smartctl -a /dev/sda
smartctl version 5.37 [i686-suse-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Model Family:     Seagate Momentus 5400.2 series
Device Model:     ST960822A
Serial Number:    3LF2F798
Firmware Version: 3.02
User Capacity:    60 011 642 880 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 2
Local Time is:    Sun Dec 16 12:00:56 2007 CET
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x82)	Offline data collection activity
					was completed without error.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (  24)	The self-test routine was aborted by
					the host.
Total time to complete Offline 
data collection: 		 ( 426) seconds.
Offline data collection
capabilities: 			 (0x5b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   1) minutes.
Extended self-test routine
recommended polling time: 	 (  84) minutes.

SMART Attributes Data Structure revision number: 10
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   059   054   034    Pre-fail  Always       -       62845648
  3 Spin_Up_Time            0x0003   096   095   000    Pre-fail  Always       -       0
  4 Start_Stop_Count        0x0032   097   097   020    Old_age   Always       -       3784
  5 Reallocated_Sector_Ct   0x0033   100   100   036    Pre-fail  Always       -       38
  7 Seek_Error_Rate         0x000f   080   060   030    Pre-fail  Always       -       110753002
  9 Power_On_Hours          0x0032   097   097   000    Old_age   Always       -       2913
 10 Spin_Retry_Count        0x0013   100   100   034    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   098   098   020    Old_age   Always       -       2264
192 Power-Off_Retract_Count 0x0032   099   099   000    Old_age   Always       -       2265
193 Load_Cycle_Count        0x0032   064   064   000    Old_age   Always       -       72252
194 Temperature_Celsius     0x0022   026   051   000    Old_age   Always       -       26 (Lifetime Min/Max 0/11)
195 Hardware_ECC_Recovered  0x001a   059   054   000    Old_age   Always       -       62845648
197 Current_Pending_Sector  0x0012   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0000   100   253   000    Old_age   Offline      -       0
202 TA_Increase_Count       0x0032   100   253   000    Old_age   Always       -       0

SMART Error Log Version: 1
ATA Error Count: 168 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 168 occurred at disk power-on lifetime: 1569 hours (65 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 cf 2a 96 e4  Error: UNC 8 sectors at LBA = 0x04962acf = 76950223

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 cf 2a 96 e4 00      00:12:47.542  READ DMA
  ca 00 10 67 21 7e e3 00      00:13:00.290  WRITE DMA
  ca 00 38 0f bc 08 e2 00      00:13:00.290  WRITE DMA
  ca 00 08 37 00 60 e0 00      00:13:00.290  WRITE DMA
  ca 00 30 8f ac 5f e0 00      00:13:00.290  WRITE DMA

Error 167 occurred at disk power-on lifetime: 1569 hours (65 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 cf 2a 96 e4  Error: UNC 8 sectors at LBA = 0x04962acf = 76950223

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 cf 2a 96 e4 00      00:12:47.542  READ DMA
  ca 00 08 df 94 93 e4 00      00:12:47.541  WRITE DMA
  ca 00 08 d7 94 93 e4 00      00:12:47.541  WRITE DMA
  ca 00 08 47 21 7e e3 00      00:12:47.541  WRITE DMA
  ca 00 08 e7 48 8d e1 00      00:12:47.539  WRITE DMA

Error 166 occurred at disk power-on lifetime: 1569 hours (65 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 cf 2a 96 e4  Error: UNC 8 sectors at LBA = 0x04962acf = 76950223

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 cf 2a 96 e4 00      00:12:47.542  READ DMA
  ca 00 08 cf 78 95 e4 00      00:12:47.541  WRITE DMA
  ca 00 08 47 00 5e e0 00      00:12:47.541  WRITE DMA
  ca 00 38 d7 bb 08 e2 00      00:12:47.541  WRITE DMA
  ca 00 08 a7 b7 0d e0 00      00:12:47.539  WRITE DMA

Error 165 occurred at disk power-on lifetime: 1569 hours (65 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 cf 2a 96 e4  Error: UNC 8 sectors at LBA = 0x04962acf = 76950223

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 cf 2a 96 e4 00      00:12:41.014  READ DMA
  ca 00 08 97 a6 35 e2 00      00:12:40.989  WRITE DMA
  ca 00 08 17 a6 56 e1 00      00:12:40.972  WRITE DMA
  ca 00 08 5f a0 3f e1 00      00:12:40.972  WRITE DMA
  ca 00 08 47 a1 59 e0 00      00:12:40.972  WRITE DMA

Error 164 occurred at disk power-on lifetime: 1569 hours (65 days + 9 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 cf 2a 96 e4  Error: UNC 8 sectors at LBA = 0x04962acf = 76950223

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 08 cf 2a 96 e4 00      00:12:34.683  READ DMA
  ca 00 08 3f 00 5e e0 00      00:12:34.683  WRITE DMA
  ca 00 08 97 3e 17 e0 00      00:12:34.683  WRITE DMA
  ca 00 08 67 32 11 e0 00      00:12:34.683  WRITE DMA
  c8 00 01 00 00 00 e0 00      00:12:34.668  READ DMA

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Short offline       Aborted by host               80%      1202         -
# 2  Short offline       Aborted by host               90%      1088         -
# 3  Extended offline    Completed without error       00%      1088         -
# 4  Short offline       Completed without error       00%      1087         -
# 5  Short offline       Aborted by host               90%       402         -
# 6  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

Offtopic diskuse použijte pro diskusi mimo záběr našeho portálu (včelařství, windows), která by měla být smazána.
Duplicitní diskuse je určena pro případ, kdy uživatel odeslal svůj dotaz několikrát.
Návrh na cenzuru použijte, pokud komentář obsahuje urážky, vulgarismy nebo porušuje zákony.
Návrh na smazání komentáře je velmi neobvyklá akce používaná obvykle při nepovolené reklamě či spamu, výkřicích psychicky nemocných jedinců (ještírci) nebo pro smazání duplikátních komentářů.
Oprava formátování je žádost pro úpravu formy příspěvku, například pokud někdo píše bez odstavců nebo použije PRE pro celý komentář. Žádosti o změnu obsahu budou zamítnuty.

Vaše jméno
Váš email
Typ požadavku

Slovní popis