Administrace komentářů

Mam televizni kartu LifeView FlyDVB-T Hybrid. Ta funguje uplne dokonale. Jenom jedna vec mi nefunguje - dalkove ovladani. Napr u LifeView FlyDVB-T DUO Elvis pise ze se mu to podarilo rozjet pres evdev. Naivne predpokladam ze DUO a HYBRID by se nemuseli tolik lisit, ale nejak mi to jede. Není tu někdo komu se s LifeView FlyDVB-T Hybrid podařilo rozjet dálkové ovládání?

#uname -a
Linux tv 2.6.23 #1 Fri Nov 23 07:42:40 UTC 2007 i686 GNU/Linux

Tohle je relevantni vystup z dmesg:
saa7133[0]: found at 0000:00:14.0, rev: 209, irq: 10, latency: 32, mmio: 0xfdffd000
saa7133[0]: subsystem: 5168:3306, board: LifeView FlyDVB-T Hybrid Cardbus [card=94,autodetected]
saa7133[0]: board init: gpio is 210000
saa7133[0]: i2c eeprom 00: 68 51 06 33 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
saa7133[0]: i2c eeprom 10: 00 00 62 08 ff 20 ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 20: 01 40 01 03 03 01 01 03 08 ff 01 16 ff ff ff ff
saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 05 01 01 16 32 15 ff ff ff ff
saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Clocksource tsc unstable (delta = 124964541 ns)
request_module: runaway loop modprobe net-pf-1
saa7133[0]: registered device video0 [v4l2]
saa7133[0]: registered device vbi0
saa7133[0]: registered device radio0
DVB: registering new adapter (saa7133[0])
DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
tda1004x: setting up plls for 48MHz sampling clock
tda1004x: found firmware revision 29 -- ok
tuner 0-004b: chip found @ 0x96 (saa7133[0])
tuner 0-004b: setting tuner address to 61
tuner 0-004b: type set to tda8290+75a
tuner 0-004b: setting tuner address to 61
tuner 0-004b: type set to tda8290+75a

A jeste input/devices:
# cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input0
U: Uniq=
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7

I: Bus=0011 Vendor=0002 Product=0004 Version=0000
N: Name="GenPS/2 Genius Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/class/input/input1
U: Uniq=
H: Handlers=mouse0 event1 ts0
B: EV=7
B: KEY=1f0000 0 0 0 0 0 0 0 0
B: REL=103

I: Bus=0003 Vendor=077d Product=0410 Version=0400
N: Name="Griffin PowerMate"
P: Phys=/input0
S: Sysfs=/class/input/input2
U: Uniq=
H: Handlers=event2
B: EV=17
B: KEY=1 0 0 0 0 0 0 0 0
B: REL=80
B: MSC=2

I: Bus=0010 Vendor=001f Product=0001 Version=0100
N: Name="PC Speaker"
P: Phys=isa0061/input0
S: Sysfs=/class/input/input3
U: Uniq=
H: Handlers=kbd event3
B: EV=40001
B: SND=6

I: Bus=0019 Vendor=0000 Product=0002 Version=0000
N: Name="Power Button (FF)"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/class/input/input4
U: Uniq=
H: Handlers=kbd event4
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button (CM)"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/class/input/input5
U: Uniq=
H: Handlers=kbd event5
B: EV=3
B: KEY=100000 0 0 0

I: Bus=0019 Vendor=0000 Product=0003 Version=0000
N: Name="Sleep Button (CM)"
P: Phys=PNP0C0E/button/input0
S: Sysfs=/class/input/input6
U: Uniq=
H: Handlers=kbd event6
B: EV=3
B: KEY=4000 0 0 0 0