Administrace komentářů

Do PC som inštaloval analógovú TV Kartu Pinnacle PCTV Pro. Skúšal som naladiť programy (kanály), ale z 35 sa mi podarilo naladiť len 4 (kanál 60,61,62 a S35). Keď koaxiál pripojím do televízora, tak naladí všetkých 35. Skúšal som MPlayer, XdTV, XawTV, TVTime. Distribúcia Debian 4.0 Stable aj Testing amd64. Skúšal so zmeniť typ karty a tunera podľa niektorých príspevkov tu na fóre, ale výsledok bol vždy len horší ako samodetekcia. Relevantné riadky z /var/log/messages:

Linux video capture interface: v2.00
ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 21
ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LAZA] -> GSI 21 (level, low) -> IRQ 21
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 19
ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19
bttv0: Bt878 (rev 17) at 0000:01:08.0, irq: 19, latency: 64, mmio: 0xfbfff000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
bttv0: i2c: checking for MSP34xx @ 0x80... found
bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... found
msp3400 0-0040: MSP3410G-B11 found @ 0x80 (bt878 #0 [sw])
msp3400 0-0040: MSP3410G-B11 supports nicam and radio, mode is autodetect and autoselect
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tuner 0-0043: chip found @ 0x86 (bt878 #0 [sw])
tda9887 0-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 0-0060: Chip ID is not zero. It is not a TEA5767
tuner 0-0060: chip found @ 0xc0 (bt878 #0 [sw])
tuner 0-0060: microtune: companycode=4d54 part=04 rev=04
tuner 0-0060: microtune MT2032 found, OK
tuner 0-0060: microtune: companycode=4d54 part=04 rev=04
tuner 0-0060: microtune MT2032 found, OK
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
tuner 0-0060: MT2032 Fatal Error: PLLs didn't lock.
bt878: AUDIO driver version 0.0.0 loaded
bt878: Bt878 AUDIO function found (0).
ACPI: PCI Interrupt 0000:01:08.1[A] -> Link [LNKA] -> GSI 19 (level, low) -> IRQ 19
bt878_probe: card id=[0x1211bd], Unknown card.
Exiting..
ACPI: PCI interrupt for device 0000:01:08.1 disabled
bt878: probe of 0000:01:08.1 failed with error -22

Tu vidím problém, že najskôr má karta pridelené prerušenie 19, potom je zakázané a predpokladám, že z toho je error -22. Ešte mi nie je jasné prečo "PLLs didn't lock.". Pridám ešte výpis XawTV a V4L.

xawtv -hwscan
This is xawtv-3.95.dfsg.1, running on Linux/x86_64 (2.6.22-3-amd64)
looking for available devices
port 275-306
type : Xvideo, image scaler
name : NV17 Video Texture
port 307-338
type : Xvideo, image scaler
name : NV05 Video Blitter
/dev/video0: OK                         [ -device /dev/video0 ]
type : v4l2
name : BT878 video (Pinnacle PCTV Stud
    flags: overlay capture tuner

v4l-conf
v4l-conf: using X11 display :0.0
dga: version 2.0
X Error of failed request:  XF86DGANoDirectVideoMode
  Major opcode of failed request:  137 (XFree86-DGA)
  Minor opcode of failed request:  1 (XF86DGAGetVideoLL)
  Serial number of failed request:  13
  Current serial number in output stream:  13

Používam Xorg a nie XFree86. Je toho dosť, ale chcel som poskytnúť čo najviac info. Ďakujem