Administrace komentářů

ERROR: Unable to load the kernel module 'nvidia.ko'.  This happens most
       frequently when this kernel module was built against the wrong or
       improperly configured kernel sources, with a version of gcc that differs
       from the one used to build the target kernel, or if a driver such as
       rivafb/nvidiafb is present and prevents the NVIDIA kernel module from   
       obtaining ownership of the NVIDIA graphics device(s).
       
       Please see the log entries 'Kernel module load error' and 'Kernel
       messages' at the end of the file '/var/log/nvidia-installer.log' for
       more information.
-> Kernel module load error: insmod: error inserting './usr/src/nv/nvidia.ko': 
   -1 Invalid module format
-> Kernel messages:
   ide: failed opcode was: unknown
   hdd: DMA disabled
   ide1: reset: success
   hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
   hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
   ide: failed opcode was: unknown
   hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
   hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
   ide: failed opcode was: unknown
   hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
   hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
   ide: failed opcode was: unknown
   hdc: dma_intr: status=0x51 { DriveReady SeekComplete Error }
   hdc: dma_intr: error=0x84 { DriveStatusError BadCRC }
   ide: failed opcode was: unknown
   ide1: reset: success
   usbhid: exports duplicate symbol hiddev_hid_event (owned by kernel)
   eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
   NET: Registered protocol family 10
   lo: Disabled Privacy Extensions
   eth0: no IPv6 routers present
   i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by
   kernel)
   nvidia: version magic '2.6.21.5-smp SMP mod_unload 686 ' should be '2.6.21.5
   mod_unload 486 '
   i2c_core: exports duplicate symbol i2c_smbus_write_i2c_block_data (owned by
   kernel)
   nvidia: version magic '2.6.21.5-smp SMP mod_unload 686 ' should be '2.6.21.5
   mod_unload 486 '
ERROR: Installation has failed.  Please see the file
       '/var/log/nvidia-installer.log' for details.  You may find suggestions 
       on fixing installation problems in the README available on the Linux
       driver download page at www.nvidia.com.