Administrace komentářů

Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

Příspěvek

29.6.2008 18:04 sedlin
Rozbalit Rozbalit vše Re: divny zaznam v logu - vadny disk?

Muzete mi nekdo mrknout, jestli je ten disk OK nebo ne? Diky.

smartctl -a /dev/hda

smartctl version 5.36 [i686-pc-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     WDC WD1600AAJB-00PVA0
Serial Number:    WD-WMAP99309052
Firmware Version: 00.07H00
User Capacity:    160�041�885�696 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   7
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sun Jun 29 18:02:21 2008 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x85)	Offline data collection activity
					was aborted by an interrupting command from host.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 (4380) seconds.
Offline data collection
capabilities: 			 (0x7b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					Conveyance Self-test supported.
					Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					General Purpose Logging supported.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  58) minutes.
Conveyance self-test routine
recommended polling time: 	 (   6) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000f   200   200   051    Pre-fail  Always       -       79
  3 Spin_Up_Time            0x0003   169   161   021    Pre-fail  Always       -       2525
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       143
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000e   200   200   051    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   094   094   000    Old_age   Always       -       4877
 10 Spin_Retry_Count        0x0012   100   100   051    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0012   100   100   051    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       142
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       64
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       143
194 Temperature_Celsius     0x0022   105   101   000    Old_age   Always       -       38
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0012   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0010   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x003e   200   197   000    Old_age   Always       -       473
200 Multi_Zone_Error_Rate   0x0008   200   200   051    Old_age   Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 79 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 79 occurred at disk power-on lifetime: 4469 hours (186 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 08 e9 02 12 e0  Error: UNC 8 sectors at LBA = 0x001202e9 = 1180393

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 08 e9 02 12 00 08      00:48:05.546  READ DMA EXT
  35 00 02 5f f7 19 01 08      00:48:05.546  WRITE DMA EXT
  35 00 06 59 f5 19 01 08      00:48:05.545  WRITE DMA EXT
  35 00 02 57 f3 19 01 08      00:48:05.545  WRITE DMA EXT
  35 00 02 55 f1 19 01 08      00:48:05.545  WRITE DMA EXT

Error 78 occurred at disk power-on lifetime: 4469 hours (186 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 38 e9 02 12 e0  Error: UNC 56 sectors at LBA = 0x001202e9 = 1180393

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 38 e9 02 12 00 08      00:48:03.324  READ DMA EXT
  25 00 40 e1 02 12 00 08      00:48:01.417  READ DMA EXT
  25 00 48 d9 02 12 00 08      00:47:59.512  READ DMA EXT
  25 00 50 d1 02 12 00 08      00:47:57.281  READ DMA EXT
  25 00 58 c9 02 12 00 08      00:47:55.235  READ DMA EXT

Error 77 occurred at disk power-on lifetime: 4469 hours (186 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 40 e1 02 12 e0  Error: UNC 64 sectors at LBA = 0x001202e1 = 1180385

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 40 e1 02 12 00 08      00:48:01.417  READ DMA EXT
  25 00 48 d9 02 12 00 08      00:47:59.512  READ DMA EXT
  25 00 50 d1 02 12 00 08      00:47:57.281  READ DMA EXT
  25 00 58 c9 02 12 00 08      00:47:55.235  READ DMA EXT
  25 00 60 c1 02 12 00 08      00:47:53.043  READ DMA EXT

Error 76 occurred at disk power-on lifetime: 4469 hours (186 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 48 d9 02 12 e0  Error: UNC 72 sectors at LBA = 0x001202d9 = 1180377

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 48 d9 02 12 00 08      00:47:59.512  READ DMA EXT
  25 00 50 d1 02 12 00 08      00:47:57.281  READ DMA EXT
  25 00 58 c9 02 12 00 08      00:47:55.235  READ DMA EXT
  25 00 60 c1 02 12 00 08      00:47:53.043  READ DMA EXT
  25 00 68 b9 02 12 00 08      00:47:50.996  READ DMA EXT

Error 75 occurred at disk power-on lifetime: 4469 hours (186 days + 5 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 50 d1 02 12 e0  Error: UNC 80 sectors at LBA = 0x001202d1 = 1180369

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  25 00 50 d1 02 12 00 08      00:47:57.281  READ DMA EXT
  25 00 58 c9 02 12 00 08      00:47:55.235  READ DMA EXT
  25 00 60 c1 02 12 00 08      00:47:53.043  READ DMA EXT
  25 00 68 b9 02 12 00 08      00:47:50.996  READ DMA EXT
  25 00 70 b1 02 12 00 08      00:47:48.665  READ DMA EXT

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%      4877         -
# 2  Extended offline    Completed: read failure       90%      4453         1180399

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.

V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

Offtopic diskuse použijte pro diskusi mimo záběr našeho portálu (včelařství, windows), která by měla být smazána.
Duplicitní diskuse je určena pro případ, kdy uživatel odeslal svůj dotaz několikrát.
Návrh na cenzuru použijte, pokud komentář obsahuje urážky, vulgarismy nebo porušuje zákony.
Návrh na smazání komentáře je velmi neobvyklá akce používaná obvykle při nepovolené reklamě či spamu, výkřicích psychicky nemocných jedinců (ještírci) nebo pro smazání duplikátních komentářů.
Oprava formátování je žádost pro úpravu formy příspěvku, například pokud někdo píše bez odstavců nebo použije PRE pro celý komentář. Žádosti o změnu obsahu budou zamítnuty.

Vaše jméno
Váš email
Typ požadavku

Slovní popis