Administrace komentářů

$ sudo airmon-ng stop wlan0


Interface	        Chipset                   Driver

wlan0              Unknown                ndiswrapper (MONITOR MODE NOT SUPPORTED)
 (monitor mode disabled)

$ hwinfo --wlan
02: PCI 200.0: 0282 WLAN controller                             
  [Created at pci.296]
  UDI: /org/freedesktop/Hal/devices/pci_168c_1c
  Unique ID: y9sn.m0vUiPh1JS3
  Parent ID: 8otl._hlk2XIeEf7
  SysFS ID: /devices/pci0000:00/0000:00:04.0/0000:02:00.0
  SysFS BusID: 0000:02:00.0
  Hardware Class: network
  Model: "Atheros WLAN controller"
  Vendor: pci 0x168c "Atheros Communications, Inc."
  Device: pci 0x001c 
  SubVendor: pci 0x1a3b 
  SubDevice: pci 0x1026 
  Revision: 0x01
  Driver: "ndiswrapper"
  Driver Modules: "ndiswrapper", "ndiswrapper"
  Device File: wlan0
  Features: WLAN
  Memory Range: 0xfa9f0000-0xfa9fffff (rw,non-prefetchable)
  IRQ: 16 (no events)
  HW Address: 00:15:af:85:26:60
  Link detected: no
  WLAN channels: 1 2 3 4 5 6 7 8 9 10 11 12 13 14
  WLAN frequencies: 2.412 2.417 2.422 2.427 2.432 2.437 2.442 2.447 2.452 2.457 2.462 2.467 2.472 2.484
  WLAN bitrates: 1 2 5.5 11 6 12 24 36
  WLAN encryption modes: WEP40 WEP104 TKIP CCMP
  WLAN authentication modes: open sharedkey wpa-psk wpa-eap
  Module Alias: "pci:v0000168Cd0000001Csv00001A3Bsd00001026bc02sc00i00"
  Driver Info #0:
    Driver Status: ath_pci is not active
    Driver Activation Cmd: "modprobe ath_pci"
  Config Status: cfg=new, avail=yes, need=no, active=unknown
  Attached to: #19 (PCI bridge)