Administrace komentářů

Ahoj,

tak jsem zakoupil TT S2-3200 bez CI modulu. Snazim se ji rozchodit... Zatim jsem se dostal do tohoto stavu:

1)

make /usr/src/multiproto && cd /usr/src/multiproto

2)

hg clone http://jusst.de/hg/multiproto

3)

cd multiproto/linux/drivers/media/dvb/frontends

4) Aplikace patchu channel lock (ladeni) http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027264.html

wget http://www.linuxtv.org/pipermail/linux-dvb/attachments/20080717/5c9a6f59/attachment.bin

mv attachment.bin stb6100.c.diff.zip

unzip stb6100.c.diff.zip

patch -p0 < stb6100.c.diff

5) Menuconfig

make menuconfig

Vybrat dle nasledujiciho:

[ ] Enable drivers not supported by this kernel
Multimedia devices --->
Audio devices for multimedia --->
---
Load an Alternate Configuration File
Save an Alternate Configuration File

Multimedia devices
<M> Video For Linux
[ ] Enable Video For Linux API 1 (DEPRECATED) [*] Enable Video For Linux API 1 compatible Layer
[ ] Video capture adapters --->
[ ] Radio Adapters --->
<M> DVB for Linux
[ ] Load and attach frontend modules as needed [*] DVB/ATSC adapters --->
[ ] DAB adapters

DVB/ATSC adapters
*** Supported SAA7146 based PCI Adapters ***
<M> AV7110 cards[*] AV7110 OSD support
<M> SAA7146 DVB cards (aka Budget, Nova-PCI)
< > Budget cards
<M> Budget cards with onboard CI connector
< > Budget cards with analog video inputs
*** Supported USB Adapters ***
< > Support for various USB DVB devices
< > Technotrend/Hauppauge Nova-USB devices
< > Technotrend/Hauppauge USB DEC devices
< > Terratec CinergyT2/qanu USB2 DVB-T receiver
*** Supported FlexCopII (B2C2) Adapters ***
< > Technisat/B2C2 FlexCopII(b) and FlexCopIII adapters
*** Supported BT878 Adapters ***
*** Supported Pluto2 Adapters ***
< > Pluto2 cards
*** Supported DVB Frontends ***
Customise DVB Frontends --->

[*] Customise the frontend modules to build
*** Multistandard (satellite) frontends ***
<M> STB0899 based
<M> STB6100 based tuners
*** DVB-S (satellite) frontends ***
<M> ST STV0299 based
< > Conexant CX24110 based
< > Conexant CX24123 based
< > Philips TDA8083 based
< > Zarlink VP310/MT312 based
< > VLSI VES1893 or VES1993 based
< > Samsung S5H1420 based
< > Philips TDA10086 based
< > Philips TDA8261 based
*** DVB-T (terrestrial) frontends ***
< > Spase sp8870 based
< > Spase sp887x based
< > Conexant CX22700 based
< > Conexant cx22702 demodulator (OFDM)
< > LSI L64781
< > Philips TDA10045H/TDA10046H based
< > NxtWave Communications NXT6000 based
< > Zarlink MT352 based
< > Zarlink ZL10353 based
< > DiBcom 3000M-B
< > DiBcom 3000P/M-C
< > DiBcom 7000MA/MB/PA/PB/MC
< > DiBcom 7000PC
*** DVB-C (cable) frontends ***
< > VLSI VES1820 based
< > Philips TDA10021 based
< > Philips TDA10023 based
< > ST STV0297 based
*** ATSC (North American/Korean Terrestrial/Cable DTV) frontends ***
< > NxtWave Communications NXT2002/NXT2004 based
< > Oren OR51211 based
< > Oren OR51132 based
< > Broadcom BCM3510
< > LG Electronics LGDT3302/LGDT3303 based
< > Samsung S5H1409 based
*** Tuners/PLL support ***
< > Generic I2C PLL based tuners
< > Philips TDA826X silicon tuner
< > Philips TDA827X silicon tuner
< > NXP TDA18271 silicon tuner
< > Quantek QT1010 silicon tuner
< > Microtune MT2060 silicon IF tuner
< > Microtune MT2266 silicon tuner
< > Microtune MT2131 silicon tuner
< > DiBcom DiB0070 silicon base-band tuner
< > Xceive XC5000 silicon tuner
*** Miscellaneous devices ***
<M> LNBP21 SEC controller
< > ISL6421 SEC controller
< > TUA6100 PLL

*** ALSA sound ***
<M> Bt87x Audio Capture [*] Bt87x Audio overclocking
*** OSS sound ***

6)

make

make install

7) Nainstalovani dvb-apps:

cd /usr/src

mkdir dvb-apps

cd dvb-apps

hg clone http://linuxtv.org/hg/dvb-apps

cd dvb-apps

make

Pak jsem narazil na problem - nemuzu zprovoznit utilitku scan.

Uspesne zkompilovat se mi podarilo pouze cistou verzi (bez patchu). Ale po spusteni to spadlo ve funkci __tune_to_transponder. Bohuzel podrobny vypis mohu dodat az se dostanu k tomu pc.

Dal jsem zkousel scan dle tohoto navodu:

cd ~/build
hg clone http://linuxtv.org/hg/dvb-apps
cd dvb-apps/util
mv scan scan.old
wget http://jusst.de/manu/scan.tar.bz2
tar -xvf scan.tar.bz2
cd scan
make clean
wget http://filearchive.night-light.net/files/dvb/scan-patch.diff
patch -p0 < scan-patch.diff
make

ale to mi nejde prelozit:

# make
perl section_generate.pl atsc_psip_section.pl
CC scan.o
scan.c:449: warning: unused parameter ‘buf’
scan.c: In function ‘tune_to_transponder’:
scan.c:1676: error: storage size of ‘fe_info1’ isn’t known
scan.c:1677: error: storage size of ‘delivery’ isn’t known
scan.c:1680: error: invalid application of ‘sizeof’ to incomplete type ‘struct dvbfe_info’ 
scan.c:1683: error: ‘DVBFE_DELSYS_DVBS’ undeclared (first use in this function)
scan.c:1683: error: (Each undeclared identifier is reported only once
scan.c:1683: error: for each function it appears in.)
scan.c:1685: error: ‘DVBFE_DELSYS_DVBS2’ undeclared (first use in this function)
scan.c:1687: error: ‘DVBFE_SET_DELSYS’ undeclared (first use in this function)
scan.c:1689: error: ‘DVBFE_GET_INFO’ undeclared (first use in this function)
scan.c:1700: error: ‘DVBFE_DELSYS_DSS’ undeclared (first use in this function)
scan.c:1677: warning: unused variable ‘delivery’
scan.c:1676: warning: unused variable ‘fe_info1’
make: *** [scan.o] Error 1

Utilitka szap take nechodi, ale szap2 z adresare test funguje - sehnal jsem si channels.conf a naladil CT 24. Pote jsem ho mohl mplayer /dev/dvb/adapter0/dvr0 normalne spustit.

Chtel jsem se zeptat ohledne te utilitky scan jestli ji nekdo mate rozchozenou. Pripadne co dalsiho by jeste bylo vhodne udelat. Diky!