Administrace komentářů

muzu poprosit o pomoc? - ten postup mi neni trochu jasny

 lspci -v | grep Ethernet -A 1
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
	Subsystem: ASUSTeK Computer Inc. Device 81f8
--
04:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
	Subsystem: Intel Corporation Device 1082
--
05:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
	Subsystem: ASUSTeK Computer Inc. Device 81f8

na desce mam dve integrovane sitovky + tu novou - ta nova tedy bude

04:00.0 Ethernet controller: Intel Corporation 82572EI Gigabit Ethernet Controller (Copper) (rev 06)
	Subsystem: Intel Corporation Device 1082

potom tam je:

ethtool -i eth> where eth> is the Ethernet port - jenze ja nevim jaky to je port tak jsem zkusil:

ethtool -i eth0
driver: eth1394
version: 
firmware-version: 
bus-info: ieee1394
root:/lib/modules# ethtool -i eth1
driver: sky2
version: 1.5
firmware-version: N/A
bus-info: 0000:05:00.0
root:/lib/modules# ethtool -i eth2
driver: sky2
version: 1.5
firmware-version: N/A
bus-info: 0000:02:00.0

popravde v tom se moc nevyznam - tipuji ze ta nova sitovka bude eth0?

pak tam je prikaz:

 ifconfig | grep "eth"
eth1      Link encap:Ethernet  HWadr 00:1e:8c:c8:af:6e  
eth1:1    Link encap:Ethernet  HWadr 00:1e:8c:c8:af:6e  
eth1:2    Link encap:Ethernet  HWadr 00:1e:8c:c8:af:6e  
eth1:3    Link encap:Ethernet  HWadr 00:1e:8c:c8:af:6e  
eth1:4    Link encap:Ethernet  HWadr 00:1e:8c:c8:af:6e  
eth1:5    Link encap:Ethernet  HWadr 00:1e:8c:c8:af:6e  

- to se mi spise jevi ze to je aktualni (stara sitovka) na ktere ted jedu - pc nemam u sebe, tak nemam moznost to zkusit ze zapojenim do nove sitovky.

Jinak to bylo pojednani o zjisteni typu sitovky - ale ten typ myslim znam (aspon podle toho co mi napsali na dodaci list :D - http://downloadcenter.intel.com/filter_results.aspx?strTypes=all&ProductID=2249&OSFullName=Linux*&lang=eng&strOSs=39&submit=Go%21)...

na tom downloadu jsou tri moznosti a nevim jakou vybrat -

1.	
Linux* IOAT DMA driver for the Intel® PCI-E server family of adapters (36KB)
	2.15.5	11/3/2008	Download
	Linux* Intel® IOAT DMA driver for patched 2.6.x kernels for Intel(R) PRO/1000, Gigabit, and 10 Gigabit PCI-e Network Adapters.	
	
	
Read Me (txt)   
	
	
OS:Linux*
	
2.	
Driver for UEFI Preboot Environment (3881KB)
	13.3	10/30/2008	Download
	Provides drivers for the UEFI preboot environment. Binaries are provided for 32-bit, 64-bit, and Intel® Itanium® processor-based platforms.	
	
	
Release Notes (txt)   
	
	
OS:OS Independent
	
3.	
Network Adapter Driver for PCI-E Gigabit Network Connections under Linux* (199KB)
	0.4.1.12	10/28/2008	Download
	Linux* Base Driver for the Intel® 82571/2/3/4 & 82566/7 PCI-E gigabit adapters/connections. This driver is intended for 2.4.18 through 2.6.x kernels.	
	
	
Read Me (txt)    Release Notes (txt)   

	
OS:Linux*
	

jelikoz mam debian amd 64 tak bych tipoval moznost c.3 (mam 2.6.18-6) - je to spravne? - mohu to nainstalovat za behu na stare sitovce? (aby me to neodpojilo)

Dekuji