Administrace komentářů

Ahoj,

Mám nainstalovaný Debian Lenny ve vmware workstation, který obsahuje IDE CDROM i SCSI CDROM. IDE CDROM (image) namountuji bez problémů, ale jakmile se o to samé pokusím s SCSI dostanu hlášku.

# mount  /dev/sr0 /mnt/
mount: you must specify the filesystem type

Už si nevím rady.

# dmesg

[    4.437150] scsi 0:0:2:0: CD-ROM            VMware,  Virtual CD-ROM   1.0  PQ: 0 ANSI: 2
[    4.437339]  target0:0:2: Beginning Domain Validation
[    4.440208]  target0:0:2: Domain Validation skipping write tests
[    4.440398]  target0:0:2: Ending Domain Validation
[    4.440587]  target0:0:2: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 127)
...

[    4.631368] Driver 'sr' needs updating - please use bus_type methods
[    4.632134] sr0: scsi3-mmc drive: 0x/0x caddy
[    4.632323] sr 0:0:2:0: Attached scsi CD-ROM sr0
[    4.666070] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    4.666259] sd 0:0:1:0: Attached scsi generic sg1 type 0
[    4.666448] sr 0:0:2:0: Attached scsi generic sg2 type 5
[    4.724398] sr0: Hmm, seems the drive doesn't support multisession CD's

# less /var/log/syslog

Jan 11 18:48:43 vm-etch NetworkManager: <debug> [1231696123.071437]
  nm_hal_device_added(): New device added (hal udi is
 '/org/freedesktop/Hal/devices/volume_part_1_size_2048').

A po pokusu, když mountu specifikuji i typ FS:


# mount  -t iso9660 /dev/sr0 /mnt/
mount: block device /dev/scd0 is write-protected, mounting read-only
mount: wrong fs type, bad option, bad superblock on /dev/scd0,
       missing codepage or helper program, or other error
       In some cases useful info is found in syslog - try
       dmesg | tail  or so



# less /var/log/syslog

Jan 11 19:09:15 vm-etch kernel: [21738.585282] attempt to access beyond end of device
Jan 11 19:09:15 vm-etch kernel: [21738.585294] sr0: rw=0, want=68, limit=4
Jan 11 19:09:15 vm-etch kernel: [21738.585301] isofs_fill_super: bread failed, dev=sr0, iso_blknum=16, block=16



Nevíte někdo co s tím?