Administrace komentářů

ahoj, docetl jsem se ze mam spatne protokol takze jsem ho zmenil na TCP

server:

mode server
tls-server
dev tap0
port 1194
proto tcp-server
ifconfig 10.1.1.1 255.255.255.0
push "route 192.168.1.0 255.255.255.0"
ifconfig-pool 10.1.1.100 10.1.1.200 255.255.255.0
duplicate-cn
client-to-client
keepalive 10 120
ca ca.crt
cert VPN-Server.crt
key VPN-Server.key
dh dh1024.pem
comp-lzo
log /var/log/vpn.log

log:

Wed Jul  1 09:13:49 2009 OpenVPN 2.0.8 x86_64-suse-linux-gnu [SSL] [LZO] [EPOLL] built on Nov 26 2006
Wed Jul  1 09:13:49 2009 TUN/TAP device tap0 opened
Wed Jul  1 09:13:49 2009 /sbin/ifconfig tap0 10.1.1.1 netmask 255.255.255.0 mtu 1500 broadcast 10.1.1.255
Wed Jul  1 09:13:49 2009 Listening for incoming TCP connection on [undef]:1194
Wed Jul  1 09:13:49 2009 TCPv4_SERVER link local (bound): [undef]:1194
Wed Jul  1 09:13:49 2009 TCPv4_SERVER link remote: [undef]
Wed Jul  1 09:13:49 2009 Initialization Sequence Completed
Wed Jul  1 09:14:08 2009 OpenVPN CLIENT LIST
Wed Jul  1 09:14:08 2009 Updated,Wed Jul  1 09:14:08 2009
Wed Jul  1 09:14:08 2009 Common Name,Real Address,Bytes Received,Bytes Sent,Connected Since
Wed Jul  1 09:14:08 2009 ROUTING TABLE
Wed Jul  1 09:14:08 2009 Virtual Address,Common Name,Real Address,Last Ref
Wed Jul  1 09:14:08 2009 GLOBAL STATS
Wed Jul  1 09:14:08 2009 Max bcast/mcast queue length,0
Wed Jul  1 09:14:08 2009 END
 

podle logu predpokladam ze server bezi tak jak ma,  ale stale se nemohu k nemu pripojit z win xp

client:

#############################################
# Sample client-side OpenVPN 2.0 config file #
# for connecting to multi-client server.     #
#                                            #
# This configuration can be used by multiple #
# clients, however each client should have   #
# its own cert and key files.                #
#                                            #
# On Windows, you might want to rename this  #
# file so it has a .ovpn extension           #
##############################################

# Specify that we are a client and that we
# will be pulling certain config file directives
# from the server.
client

# Use the same setting as you are using on
# the server.
# On most systems, the VPN will not function
# unless you partially or fully disable
# the firewall for the TUN/TAP interface.
dev tap


# Windows needs the TAP-Win32 adapter name
# from the Network Connections panel
# if you have more than one.  On XP SP2,
# you may need to disable the firewall
# for the TAP adapter.
;dev-node MyTap

# Are we connecting to a TCP or
# UDP server?  Use the same setting as
# on the server.
proto tcp


# The hostname/IP and port of the server.
# You can have multiple remote entries
# to load balance between the servers.
remote 84.242.97.170 1194


# Choose a random host from the remote
# list for load-balancing.  Otherwise
# try hosts in the order specified.
;remote-random

# Keep trying indefinitely to resolve the
# host name of the OpenVPN server.  Very useful
# on machines which are not permanently connected
# to the internet such as laptops.
resolv-retry infinite

# Most clients don't need to bind to
# a specific local port number.
nobind

# Downgrade privileges after initialization (non-Windows only)
;user vpn
;group

# Try to preserve some state across restarts.
persist-key
persist-tun

# If you are connecting through an
# HTTP proxy to reach the actual OpenVPN
# server, put the proxy server/IP and
# port number here.  See the man page
# if your proxy server requires
# authentication.
;http-proxy-retry # retry on connection failures
;http-proxy [proxy server] [proxy port #]

# Wireless networks often produce a lot
# of duplicate packets.  Set this flag
# to silence duplicate packet warnings.
;mute-replay-warnings

# SSL/TLS parms.
# See the server config file for more
# description.  It's best to use
# a separate .crt/.key file pair
# for each client.  A single ca
# file can be used for all clients.
ca ca.crt
cert client.crt
key client.key

# Verify server certificate by checking
# that the certicate has the nsCertType
# field set to "server".  This is an
# important precaution to protect against
# a potential attack discussed here:
#  http://openvpn.net/howto.html#mitm
#
# To use this feature, you will need to generate
# your server certificates with the nsCertType
# field set to "server".  The build-key-server
# script in the easy-rsa folder will do this.
;ns-cert-type server

# If a tls-auth key is used on the server
# then every client must also have the key.
;tls-auth ta.key 1

# Select a cryptographic cipher.
# If the cipher option is used on the server
# then you must also specify it here.
;cipher x

# Enable compression on the VPN link.
# Don't enable this unless it is also
# enabled in the server config file.
comp-lzo

# Set log file verbosity.
verb 3

# Silence repeating messages
;mute 20

 

log:

Wed Jul 01 09:27:52 2009 OpenVPN 2.1_rc18 i686-pc-mingw32 [SSL] [LZO2] [PKCS11] built on Jun  7 2009
Wed Jul 01 09:27:52 2009 WARNING: No server certificate verification method has been enabled.  See http://openvpn.net/howto.html#mitm for more info.
Wed Jul 01 09:27:52 2009 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Wed Jul 01 09:27:52 2009 LZO compression initialized
Wed Jul 01 09:27:52 2009 Control Channel MTU parms [ L:1576 D:140 EF:40 EB:0 ET:0 EL:0 ]
Wed Jul 01 09:27:52 2009 Data Channel MTU parms [ L:1576 D:1450 EF:44 EB:135 ET:32 EL:0 AF:3/1 ]
Wed Jul 01 09:27:52 2009 Local Options hash (VER=V4): '31fdf004'
Wed Jul 01 09:27:52 2009 Expected Remote Options hash (VER=V4): '3e6d1056'
Wed Jul 01 09:27:52 2009 Attempting to establish TCP connection with 84.242.97.170:1194

poradi pro sim nekdo?

diky moc