Administrace komentářů

Ahoj Franto. Díky za odpověď. (nevadí tykání? :))

Disky by mohly být cca 3/4 roku staré, jedou v tom serveru téměř 24 hodin denně. Kabel mám jen jeden, a jak už mi bylo doporučeno, až doběhne test smartmontools, tak zkusím k sda vyměnit.

hdparm -I /dev/sda:

/dev/sda:

ATA device, with non-removable media
    Model Number:       SAMSUNG HD103UJ                        
    Serial Number:      S13PJ9AQC03115     
    Firmware Revision:  1AA01113
Standards:
    Used: ATA-8-ACS revision 3b
    Supported: 7 6 5 4
Configuration:
    Logical        max    current
    cylinders    16383    16383
    heads        16    16
    sectors/track    63    63
    --
    CHS current addressable sectors:   16514064
    LBA    user addressable sectors:  268435455
    LBA48  user addressable sectors: 1953525168
    device size with M = 1024*1024:      953869 MBytes
    device size with M = 1000*1000:     1000204 MBytes (1000 GB)
Capabilities:
    LBA, IORDY(can be disabled)
    Queue depth: 32
    Standby timer values: spec'd by Standard, no device specific minimum
    R/W multiple sector transfer: Max = 16    Current = 16
    Advanced power management level: disabled
    Recommended acoustic management value: 254, current value: 0
    DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7
         Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
         Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
    Enabled    Supported:
       *    SMART feature set
            Security Mode feature set
       *    Power Management feature set
       *    Write cache
       *    Look-ahead
       *    Host Protected Area feature set
       *    WRITE_BUFFER command
       *    READ_BUFFER command
       *    NOP cmd
       *    DOWNLOAD_MICROCODE
            Advanced Power Management feature set
            Power-Up In Standby feature set
       *    SET_FEATURES required to spinup after power up
            SET_MAX security extension
            Automatic Acoustic Management feature set
       *    48-bit Address feature set
       *    Device Configuration Overlay feature set
       *    Mandatory FLUSH_CACHE
       *    FLUSH_CACHE_EXT
       *    SMART error logging
       *    SMART self-test
            Media Card Pass-Through
       *    General Purpose Logging feature set
       *    64-bit World wide name
       *    WRITE_UNCORRECTABLE_EXT command
       *    {READ,WRITE}_DMA_EXT_GPL commands
       *    Segmented DOWNLOAD_MICROCODE
       *    SATA-I signaling speed (1.5Gb/s)
       *    SATA-II signaling speed (3.0Gb/s)
       *    Native Command Queueing (NCQ)
       *    Host-initiated interface power management
       *    Phy event counters
       *    unknown 76[12]
            DMA Setup Auto-Activate optimization
            Device-initiated interface power management
       *    Software settings preservation
       *    SMART Command Transport (SCT) feature set
       *    SCT Long Sector Access (AC1)
       *    SCT LBA Segment Access (AC2)
       *    SCT Error Recovery Control (AC3)
       *    SCT Features Control (AC4)
       *    SCT Data Tables (AC5)
Security:
    Master password revision code = 65534
        supported
    not    enabled
    not    locked
        frozen
    not    expired: security count
        supported: enhanced erase
    170min for SECURITY ERASE UNIT. 170min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000f0060c1351
    NAA        : 5
    IEEE OUI    : f0
    Unique ID    : 060c1351
Checksum: correct

hdparm -I /dev/sdb:

/dev/sdb:

ATA device, with non-removable media
    Model Number:       SAMSUNG HD103UJ                        
    Serial Number:      S13PJ9AQC03116     
    Firmware Revision:  1AA01113
Standards:
    Used: ATA-8-ACS revision 3b
    Supported: 7 6 5 4
Configuration:
    Logical        max    current
    cylinders    16383    16383
    heads        16    16
    sectors/track    63    63
    --
    CHS current addressable sectors:   16514064
    LBA    user addressable sectors:  268435455
    LBA48  user addressable sectors: 1953525168
    device size with M = 1024*1024:      953869 MBytes
    device size with M = 1000*1000:     1000204 MBytes (1000 GB)
Capabilities:
    LBA, IORDY(can be disabled)
    Queue depth: 32
    Standby timer values: spec'd by Standard, no device specific minimum
    R/W multiple sector transfer: Max = 16    Current = 16
    Advanced power management level: disabled
    Recommended acoustic management value: 254, current value: 0
    DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 udma7
         Cycle time: min=120ns recommended=120ns
    PIO: pio0 pio1 pio2 pio3 pio4
         Cycle time: no flow control=120ns  IORDY flow control=120ns
Commands/features:
    Enabled    Supported:
       *    SMART feature set
            Security Mode feature set
       *    Power Management feature set
       *    Write cache
       *    Look-ahead
       *    Host Protected Area feature set
       *    WRITE_BUFFER command
       *    READ_BUFFER command
       *    NOP cmd
       *    DOWNLOAD_MICROCODE
            Advanced Power Management feature set
            Power-Up In Standby feature set
       *    SET_FEATURES required to spinup after power up
            SET_MAX security extension
            Automatic Acoustic Management feature set
       *    48-bit Address feature set
       *    Device Configuration Overlay feature set
       *    Mandatory FLUSH_CACHE
       *    FLUSH_CACHE_EXT
       *    SMART error logging
       *    SMART self-test
            Media Card Pass-Through
       *    General Purpose Logging feature set
       *    64-bit World wide name
       *    WRITE_UNCORRECTABLE_EXT command
       *    {READ,WRITE}_DMA_EXT_GPL commands
       *    Segmented DOWNLOAD_MICROCODE
       *    SATA-I signaling speed (1.5Gb/s)
       *    SATA-II signaling speed (3.0Gb/s)
       *    Native Command Queueing (NCQ)
       *    Host-initiated interface power management
       *    Phy event counters
       *    unknown 76[12]
            DMA Setup Auto-Activate optimization
            Device-initiated interface power management
       *    Software settings preservation
       *    SMART Command Transport (SCT) feature set
       *    SCT Long Sector Access (AC1)
       *    SCT LBA Segment Access (AC2)
       *    SCT Error Recovery Control (AC3)
       *    SCT Features Control (AC4)
       *    SCT Data Tables (AC5)
Security:
    Master password revision code = 65534
        supported
    not    enabled
    not    locked
        frozen
    not    expired: security count
        supported: enhanced erase
    176min for SECURITY ERASE UNIT. 176min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 5000f0060c1361
    NAA        : 5
    IEEE OUI    : f0
    Unique ID    : 060c1361
Checksum: correct
 

Oba se mi zdají stejné. Chytrý z toho opět bohužel nejsem.

Co kdybych zkusil přidat do md0 znova ten sdb, resync, pak zkusil ty disky znova projet smartctl a pokud by některý hlásil chyby, tak s klidným svědomím vyměnil?