Administrace komentářů

Tak vypadá že freeradius naslouchá:

Musel jsem použít freeradius stop a killall radius.

Teď se zobrazuje:

Listening on authentication address 10.1.0.16 port 1812
Listening on accounting address 10.1.0.16 port 1813
Listening on proxy address 10.1.0.16 port 1814

Dále bych měl ještě jeden dotaz: Nainstaloval jsem podporu pro mysql podle návodu:

http://www.kiv.zcu.cz/~simekm/vyuka/pd/zapocty-2004/radius_mysql-mikolasek/

Když se notebookem připojím do wifi, chce po mě ověření, po zadání me freeradius vypíše:

( předpokládám že funguje komunikace, ale uživatele neověří )

Ready to process requests.
rad_recv: Access-Request packet from host 10.1.0.31 port 1239, id=16, length=131
User-Name = "vasek"
NAS-IP-Address = 10.1.0.31
NAS-Port = 0
Called-Station-Id = "00-06-25-53-C4-44"
Calling-Station-Id = "00-15-AF-39-16-4C"
NAS-Identifier = "DWL-900AP+"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000a01766173656b
Message-Authenticator = 0xfa8d65a922bc9127efde4c0cb9ecb460
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "vasek", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 1 length 10
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
users: Matched entry DEFAULT at line 59
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
rad_check_password:  Found Auth-Type Reject
rad_check_password: Auth-Type = Reject, rejecting user
auth: Failed to validate the user.
Login incorrect: [vasek/<via Auth-Type = Reject>] (from client default port 0 cli 00-15-AF-39-16-4C)
Found Post-Auth-Type Reject
+- entering group REJECT
expand: %{User-Name} -> vasek
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 0 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 0
Sending Access-Reject of id 16 to 10.1.0.31 port 1239
Reply-Message = "I hear you knocking, but you cant come in"
Waking up in 4.9 seconds.
Cleaning up request 0 ID 16 with timestamp +142
Ready to process requests.

V radius.conf jsem nechal vše stejný po instalaci, jen mám povolený include modul sql.

A ostatní jsem nastavil zvlášť v adresáři sites-enabled souborech

V eap.conf nastavený default_eap_type = md5

v souboru : default

preacct {      
acct_unique
preprocess
suffix
#files
}

accounting {
detail
#unix
sql
#radutmp
#sradutmp
}

v souboru: inner-tunnel

authenticate {
authtype PAP {
pap
}
authtype CHAP {
chap
}
authtype MS-CHAP{
mschap
}
#digest
#pam
#unix
#authtype LDAP {
#       ldap
#}

}

Díky za ochotu a pomoc