Administrace komentářů

Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

Příspěvek

15.3.2010 10:44 detektiv | skóre: 3
Rozbalit Rozbalit vše Re: Freeradius - připojení

Tak jsem dal dva uzivatele test steve helslo mají stejný:

Ready to process requests.
rad_recv: Access-Request packet from host 10.1.0.31 port 1239, id=122, length=129
User-Name = "test"
NAS-IP-Address = 10.1.0.31
NAS-Port = 0
Called-Station-Id = "00-06-25-53-C4-44"
Calling-Station-Id = "00-15-AF-39-16-4C"
NAS-Identifier = "DWL-900AP+"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020100090174657374
Message-Authenticator = 0xd278c274afa5aa724a28704593978c6a
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 1 length 9
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
users: Matched entry test at line 76
expand: Hello, %{User-Name} -> Hello, test
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: EAP Identity
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 122 to 10.1.0.31 port 1239
Reply-Message = "Hello, test"
EAP-Message = 0x010200160410e04222730af0b163802bca6fc02604fd
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x299dfeda299ffab745048b38aa0bd1dd
Finished request 0.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.1.0.31 port 1239, id=123, length=144
User-Name = "test"
NAS-IP-Address = 10.1.0.31
NAS-Port = 0
Called-Station-Id = "00-06-25-53-C4-44"
Calling-Station-Id = "00-15-AF-39-16-4C"
NAS-Identifier = "DWL-900AP+"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060319
State = 0x299dfeda299ffab745048b38aa0bd1dd
Message-Authenticator = 0x2d0efca9f4b9807f356bb080f9d160c4
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
users: Matched entry test at line 76
expand: Hello, %{User-Name} -> Hello, test
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP NAK
rlm_eap: NAK asked for unsupported type 25
rlm_eap: No common EAP types found.
rlm_eap: Failed in EAP select
++[eap] returns invalid
auth: Failed to validate the user.
Login incorrect: [test/<via Auth-Type = EAP>] (from client default port 0 cli 00-15-AF-39-16-4C)
Found Post-Auth-Type Reject
+- entering group REJECT
expand: %{User-Name} -> test
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 1 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 1
Sending Access-Reject of id 123 to 10.1.0.31 port 1239
Reply-Message = "Hello, test"
EAP-Message = 0x04020004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.4 seconds.
Cleaning up request 0 ID 122 with timestamp +19
Waking up in 1.5 seconds.
Cleaning up request 1 ID 123 with timestamp +20
Ready to process requests.
rad_recv: Access-Request packet from host 10.1.0.31 port 1239, id=124, length=131
User-Name = "steve"
NAS-IP-Address = 10.1.0.31
NAS-Port = 0
Called-Station-Id = "00-06-25-53-C4-44"
Calling-Station-Id = "00-15-AF-39-16-4C"
NAS-Identifier = "DWL-900AP+"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000a017374657665
Message-Authenticator = 0xe75246ced5ba6ba7aecb341fa342f644
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "steve", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 1 length 10
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
users: Matched entry steve at line 80
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: EAP Identity
rlm_eap: processing type md5
rlm_eap_md5: Issuing Challenge
++[eap] returns handled
Sending Access-Challenge of id 124 to 10.1.0.31 port 1239
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-IP-Address = 172.16.3.33
Framed-IP-Netmask = 255.255.255.0
Framed-Routing = Broadcast-Listen
Framed-Filter-Id = "std.ppp"
Framed-MTU = 1500
Framed-Compression = Van-Jacobson-TCP-IP
EAP-Message = 0x0102001604106bb6313333ce85b400f5b07dd94c5064
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x0dc82af30dca2ea51c9bcf8d79d8dd5f
Finished request 2.
Going to the next request
Waking up in 4.9 seconds.
rad_recv: Access-Request packet from host 10.1.0.31 port 1239, id=125, length=145
User-Name = "steve"
NAS-IP-Address = 10.1.0.31
NAS-Port = 0
Called-Station-Id = "00-06-25-53-C4-44"
Calling-Station-Id = "00-15-AF-39-16-4C"
NAS-Identifier = "DWL-900AP+"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020200060319
State = 0x0dc82af30dca2ea51c9bcf8d79d8dd5f
Message-Authenticator = 0x002a508ea8cbf68103797e227eef1496
+- entering group authorize
++[preprocess] returns ok
++[chap] returns noop
++[mschap] returns noop
rlm_realm: No '@' in User-Name = "steve", looking up realm NULL
rlm_realm: No such realm "NULL"
++[suffix] returns noop
rlm_eap: EAP packet type response id 2 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
++[eap] returns updated
++[unix] returns notfound
users: Matched entry steve at line 80
++[files] returns ok
++[expiration] returns noop
++[logintime] returns noop
rlm_pap: Found existing Auth-Type, not changing it.
++[pap] returns noop
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
+- entering group authenticate
rlm_eap: Request found, released from the list
rlm_eap: EAP NAK
rlm_eap: NAK asked for unsupported type 25
rlm_eap: No common EAP types found.
rlm_eap: Failed in EAP select
++[eap] returns invalid
auth: Failed to validate the user.
Login incorrect: [steve/<via Auth-Type = EAP>] (from client default port 0 cli 00-15-AF-39-16-4C)
Found Post-Auth-Type Reject
+- entering group REJECT
expand: %{User-Name} -> steve
attr_filter: Matched entry DEFAULT at line 11
++[attr_filter.access_reject] returns updated
Delaying reject of request 3 for 1 seconds
Going to the next request
Waking up in 0.9 seconds.
Sending delayed reject for request 3
Sending Access-Reject of id 125 to 10.1.0.31 port 1239
EAP-Message = 0x04020004
Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.9 seconds.
Cleaning up request 2 ID 124 with timestamp +41
Waking up in 1.0 seconds.
Cleaning up request 3 ID 125 with timestamp +41
Ready to process requests.

V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

Offtopic diskuse použijte pro diskusi mimo záběr našeho portálu (včelařství, windows), která by měla být smazána.
Duplicitní diskuse je určena pro případ, kdy uživatel odeslal svůj dotaz několikrát.
Návrh na cenzuru použijte, pokud komentář obsahuje urážky, vulgarismy nebo porušuje zákony.
Návrh na smazání komentáře je velmi neobvyklá akce používaná obvykle při nepovolené reklamě či spamu, výkřicích psychicky nemocných jedinců (ještírci) nebo pro smazání duplikátních komentářů.
Oprava formátování je žádost pro úpravu formy příspěvku, například pokud někdo píše bez odstavců nebo použije PRE pro celý komentář. Žádosti o změnu obsahu budou zamítnuty.

Vaše jméno
Váš email
Typ požadavku

Slovní popis