Administrace komentářů

Zdravim, dostala se mi do ruky usb dvb-t genius...

stahl jsem firmware, kartu to najde, vse se tvari OK,

ale nic (w_scan, vlc, kaffeine) nenajde pri skenovani zadny kanal.

Co s tim? Signal by tu mel byt z Trutnova, pouzivam externi antenku, co prisla s tim usbckem

diky

kolcon

dmesg :

usb 5-1: new high speed USB device using ehci_hcd and address 7
dvb-usb: found a 'Genius TVGo DVB-T03' in cold state, will try to load a firmware
usb 5-1: firmware: requesting dvb-usb-af9015.fw
dvb-usb: downloading firmware from file 'dvb-usb-af9015.fw'
dvb-usb: found a 'Genius TVGo DVB-T03' in warm state.
dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
DVB: registering new adapter (Genius TVGo DVB-T03)
af9013: firmware version:4.95.0
DVB: registering adapter 0 frontend 0 (Afatech AF9013 DVB-T)...
tda18271 6-00c0: creating new instance
TDA18271HD/C2 detected @ 6-00c0
dvb-usb: Genius TVGo DVB-T03 successfully initialized and connected.
usbcore: registered new interface driver dvb_usb_af9015
tda18271: performing RF tracking filter calibration
tda18271: RF tracking filter calibration complete

$ w_scan -c cz

w_scan version 20090918 (compiled for DVB API 5.1)
using settings for CZECH REPUBLIC
DVB aerial
DVB-T Europe
frontend_type DVB-T, channellist 4
output format vdr-1.6
Info: using DVB adapter auto detection.
/dev/dvb/adapter0/frontend0 -> DVB-T "Afatech AF9013 DVB-T": good
Using DVB-T frontend (adapter /dev/dvb/adapter0/frontend0)
-_-_-_-_ Getting frontend capabilities-_-_-_-_
Using DVB API 5.1
frontend Afatech AF9013 DVB-T supports
INVERSION_AUTO
QAM_AUTO
TRANSMISSION_MODE_AUTO
GUARD_INTERVAL_AUTO
HIERARCHY_AUTO
FEC_AUTO
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
Scanning 7MHz frequencies...
177500: (time: 00:05)
184500: (time: 00:07)
191500: (time: 00:10)
198500: (time: 00:12)
205500: (time: 00:15)
212500: (time: 00:18)
219500: (time: 00:20)
226500: (time: 00:23)
Scanning 8MHz frequencies...
474000: (time: 00:25)

..

..

858000: (time: 02:30)

ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!