Administrace komentářů

//=============================================================================
//
// Copyright 2005-2008 Western Digital Corporation
//
// RESTRICTED RIGHTS LEGEND
// ------------------------
//
// Use, duplication or disclosure by any commercial industry (public
// or private), private individual or by any Government Agency without
// an expressed written consent of release from Western Digital
// Corporation is subject to restriction set forth in paragraph
// (b)(3)(B) of the Rights in Technical Data and Computer Software
// clause in DAR 7-104.9(a). 
//
// Manufacturer is:
//
// Western Digital Corporation
//   20511 Lake Forest Dr.
//   Lake Forest, CA 92630
//   1-800-275-4932
//=============================================================================

WDIDLE3 Version 1.03 for DOS


DESCRIPTION
- DOS Level utility to setup or report the idle3 value.


FEATURES
- Scan for all drives. Non-WD Drives shall only show the model and serial 
  numbers.
- Uses a Vendor Specific Command to set or get the idle3 timer.
- Timer can be set from 100 ms to 25.5 seconds on older drives.
- Timer can be set from 100 ms to 300 seconds on newer drives.


USAGE
WDIDLE3 [/S["Timer"]] [/D] [/R] [/?]
where:
/S["Timer"] Set timer, units in seconds. Default=8.0 (8.0 seconds).
            Resolution is 0.1 seconds from 0.1 to 12.7 seconds.
            Resolution is 30 seconds from 30 seconds to 300000 seconds.
            Note, times between 12.8 and 30 seconds will be set to 30 seconds.
/D          Disable timer.
/R          Report current timer.
/?          This help info.

DOS ERRORLEVEL
0     No error
1     Drive problem
254   Internal program error
255   Invalid command line argument

smartctl version 5.33 [i686-pc-linux-gnu] Copyright (C) 2002-4 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF ENABLE/DISABLE COMMANDS SECTION ===
SMART Enabled.

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   136   115   021    Pre-fail  Always       -       6183
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       18
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   098   098   000    Old_age   Always       -       2076
 10 Spin_Retry_Count        0x0032   100   253   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   253   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       16
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       9
193 Load_Cycle_Count        0x0032   195   195   000    Old_age   Always       -       16241
194 Temperature_Celsius     0x0022   114   107   000    Old_age   Always       -       33
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0