Administrace komentářů

Zdravim

snažím se rozchodit monitoring z lm-sensors přes net-snmp, ale nějak se mi nedaří a už si nevím rady, několik hodiny jsem googloval a nic kloudného mi nepomohlo.

Sensors mi fungují viz:

coretemp-isa-0000
Adapter: ISA adapter
Core 0:      +34.0°C  (crit = +100.0°C)

coretemp-isa-0002
Adapter: ISA adapter
Core 1:      +33.0°C  (crit = +100.0°C)

w83627thf-isa-0290
Adapter: ISA adapter
VCore:       +1.14 V  (min =  +0.77 V, max =  +1.23 V)
+5V:         +4.93 V  (min =  +4.75 V, max =  +5.25 V)
+12V:       +11.65 V  (min = +10.81 V, max = +13.22 V)
V5SB:        +4.89 V  (min =  +4.76 V, max =  +5.24 V)
+3.3V:       +3.28 V  (min =  +2.40 V, max =  +3.60 V)
CASE Fan:   2410 RPM  (min =  664 RPM, div = 8)
M/B Temp:    +54.0°C  (high = +60.0°C, hyst = +56.0°C)  sensor = thermistor
CPU Temp:    +38.5°C  (high = +80.0°C, hyst = +75.0°C)  sensor = diode
beep_enable:disabled

když zkusím:

:~$ snmpwalk -v 2c -c public -m ALL localhost lmSensors
LM-SENSORS-MIB::lmVoltSensorsIndex.1 = INTEGER: 0
LM-SENSORS-MIB::lmVoltSensorsIndex.2 = INTEGER: 1
LM-SENSORS-MIB::lmVoltSensorsIndex.3 = INTEGER: 2
LM-SENSORS-MIB::lmVoltSensorsIndex.4 = INTEGER: 3
LM-SENSORS-MIB::lmVoltSensorsDevice.1 = STRING: VCore
LM-SENSORS-MIB::lmVoltSensorsDevice.2 = STRING: VCore
LM-SENSORS-MIB::lmVoltSensorsDevice.3 = STRING: VCore
LM-SENSORS-MIB::lmVoltSensorsDevice.4 = STRING: VCore
LM-SENSORS-MIB::lmVoltSensorsValue.1 = Gauge32: 1151
LM-SENSORS-MIB::lmVoltSensorsValue.2 = Gauge32: 768
LM-SENSORS-MIB::lmVoltSensorsValue.3 = Gauge32: 1231
LM-SENSORS-MIB::lmVoltSensorsValue.4 = Gauge32: 0
LM-SENSORS-MIB::lmMiscSensorsIndex.1 = INTEGER: 0
LM-SENSORS-MIB::lmMiscSensorsIndex.2 = INTEGER: 1
LM-SENSORS-MIB::lmMiscSensorsIndex.3 = INTEGER: 2
LM-SENSORS-MIB::lmMiscSensorsIndex.4 = INTEGER: 3
LM-SENSORS-MIB::lmMiscSensorsIndex.5 = INTEGER: 4
LM-SENSORS-MIB::lmMiscSensorsIndex.6 = INTEGER: 5
LM-SENSORS-MIB::lmMiscSensorsDevice.1 = STRING: Core 0
LM-SENSORS-MIB::lmMiscSensorsDevice.2 = STRING: Core 0
LM-SENSORS-MIB::lmMiscSensorsDevice.3 = STRING: Core 0
LM-SENSORS-MIB::lmMiscSensorsDevice.4 = STRING: Core 1
LM-SENSORS-MIB::lmMiscSensorsDevice.5 = STRING: Core 1
LM-SENSORS-MIB::lmMiscSensorsDevice.6 = STRING: Core 1
LM-SENSORS-MIB::lmMiscSensorsValue.1 = Gauge32: 34000
LM-SENSORS-MIB::lmMiscSensorsValue.2 = Gauge32: 100000
LM-SENSORS-MIB::lmMiscSensorsValue.3 = Gauge32: 0
LM-SENSORS-MIB::lmMiscSensorsValue.4 = Gauge32: 33000
LM-SENSORS-MIB::lmMiscSensorsValue.5 = Gauge32: 100000
LM-SENSORS-MIB::lmMiscSensorsValue.6 = Gauge32: 0



Mám tam jen teploty jader a ty jestě nesouhlasí, už jsem to zkoušel přeinstalovat a stále nic...

výpis snmpd.conf:

com2sec readonly  default         public

group MyROSystem v1        paranoid
group MyROSystem v2c       paranoid
group MyROSystem usm       paranoid
group MyROGroup v1         readonly
group MyROGroup v2c        readonly
group MyROGroup usm        readonly
group MyRWGroup v1         readwrite
group MyRWGroup v2c        readwrite
group MyRWGroup usm        readwrite
view all    included  .1                               80
view system included  .1.3.6.1.2.1.1
access MyROSystem ""     any       noauth    exact  system none   none
access MyROGroup ""      any       noauth    exact  all    none   none
access MyRWGroup ""      any       noauth    exact  all    all    none
syslocation xxx
syscontact xxxxxxx



Používám Ubuntu server 10.04 LTS,
NET-SNMP version 5.4.2.1
lm-sensors version 1:3.1.2-2

Prosím, co mám udělat aby mi to dalo korektní hodnoty?

Předem díky za odpověď.