Administrace komentářů

Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

Příspěvek

1.1.2011 21:15 xkomczax | skóre: 51 | blog: proste_blog
Rozbalit Rozbalit vše Re: Havarovany disk

smartctl 5.40 2010-03-16 r3077 [i686-pc-linux-gnu] (local build)
Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net

=== START OF INFORMATION SECTION ===
Model Family:     Toshiba 2.5" HDD series (30-60 GB)
Device Model:     TOSHIBA MK6025GAS
Serial Number:    X5PT1287S
Firmware Version: KA201A
User Capacity:    60,011,642,880 bytes
Device is:        In smartctl database [for details use: -P show]
ATA Version is:   6
ATA Standard is:  Exact ATA specification draft version not indicated
Local Time is:    Sat Jan  1 20:12:01 2011 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status:  (0x80)	Offline data collection activity
					was never started.
					Auto Offline Data Collection: Enabled.
Self-test execution status:      (   0)	The previous self-test routine completed
					without error or no self-test has ever 
					been run.
Total time to complete Offline 
data collection: 		 ( 295) seconds.
Offline data collection
capabilities: 			 (0x1b) SMART execute Offline immediate.
					Auto Offline data collection on/off support.
					Suspend Offline collection upon new
					command.
					Offline surface scan supported.
					Self-test supported.
					No Conveyance Self-test supported.
					No Selective Self-test supported.
SMART capabilities:            (0x0003)	Saves SMART data before entering
					power-saving mode.
					Supports SMART auto save timer.
Error logging capability:        (0x01)	Error logging supported.
					No General Purpose Logging support.
Short self-test routine 
recommended polling time: 	 (   2) minutes.
Extended self-test routine
recommended polling time: 	 (  59) minutes.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   050    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   050    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0027   100   100   001    Pre-fail  Always       -       1411
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       7839
  5 Reallocated_Sector_Ct   0x0033   100   100   050    Pre-fail  Always       -       50
  7 Seek_Error_Rate         0x000b   100   100   050    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   050    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0032   069   069   000    Old_age   Always       -       12666
 10 Spin_Retry_Count        0x0033   253   100   030    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       4575
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       263
193 Load_Cycle_Count        0x0032   058   058   000    Old_age   Always       -       424585
194 Temperature_Celsius     0x0022   100   100   000    Old_age   Always       -       35 (Lifetime Min/Max 8/57)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       50
197 Current_Pending_Sector  0x0032   100   100   000    Old_age   Always       -       263
198 Offline_Uncorrectable   0x0030   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       2
220 Disk_Shift              0x0002   100   100   000    Old_age   Always       -       8284
222 Loaded_Hours            0x0032   076   076   000    Old_age   Always       -       9850
223 Load_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
224 Load_Friction           0x0022   100   100   000    Old_age   Always       -       0
226 Load-in_Time            0x0026   100   100   000    Old_age   Always       -       218
240 Head_Flying_Hours       0x0001   100   100   001    Pre-fail  Offline      -       0

SMART Error Log Version: 1
ATA Error Count: 682 (device log contains only the most recent five errors)
	CR = Command Register [HEX]
	FR = Features Register [HEX]
	SC = Sector Count Register [HEX]
	SN = Sector Number Register [HEX]
	CL = Cylinder Low Register [HEX]
	CH = Cylinder High Register [HEX]
	DH = Device/Head Register [HEX]
	DC = Device Command Register [HEX]
	ER = Error register [HEX]
	ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 682 occurred at disk power-on lifetime: 12664 hours (527 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 8d 0a d9 60 e3  Error: UNC 141 sectors at LBA = 0x0360d90a = 56678666

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 97 d8 60 e3 00      00:01:40.516  READ DMA
  f8 00 00 00 00 00 e0 00      00:01:40.515  READ NATIVE MAX ADDRESS
  ec 00 00 00 00 00 a0 02      00:01:40.508  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      00:01:40.508  SET FEATURES [Set transfer mode]
  f8 00 00 00 00 00 e0 00      00:01:40.507  READ NATIVE MAX ADDRESS

Error 681 occurred at disk power-on lifetime: 12664 hours (527 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 8d 0a d9 60 e3  Error: UNC 141 sectors at LBA = 0x0360d90a = 56678666

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 97 d8 60 e3 00      00:01:32.173  READ DMA
  f8 00 00 00 00 00 e0 00      00:01:32.173  READ NATIVE MAX ADDRESS
  ec 00 00 00 00 00 a0 02      00:01:32.166  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      00:01:32.165  SET FEATURES [Set transfer mode]
  f8 00 00 00 00 00 e0 00      00:01:32.165  READ NATIVE MAX ADDRESS

Error 680 occurred at disk power-on lifetime: 12664 hours (527 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 8d 0a d9 60 e3  Error: UNC 141 sectors at LBA = 0x0360d90a = 56678666

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 97 d8 60 e3 00      00:01:23.831  READ DMA
  f8 00 00 00 00 00 e0 00      00:01:23.831  READ NATIVE MAX ADDRESS
  ec 00 00 00 00 00 a0 02      00:01:23.824  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      00:01:23.823  SET FEATURES [Set transfer mode]
  f8 00 00 00 00 00 e0 00      00:01:23.823  READ NATIVE MAX ADDRESS

Error 679 occurred at disk power-on lifetime: 12664 hours (527 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 8d 0a d9 60 e3  Error: UNC 141 sectors at LBA = 0x0360d90a = 56678666

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 97 d8 60 e3 00      00:01:15.502  READ DMA
  f8 00 00 00 00 00 e0 00      00:01:15.501  READ NATIVE MAX ADDRESS
  ec 00 00 00 00 00 a0 02      00:01:15.494  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      00:01:15.494  SET FEATURES [Set transfer mode]
  f8 00 00 00 00 00 e0 00      00:01:15.493  READ NATIVE MAX ADDRESS

Error 678 occurred at disk power-on lifetime: 12664 hours (527 days + 16 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  40 51 8d 0a d9 60 e3  Error: UNC 141 sectors at LBA = 0x0360d90a = 56678666

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  c8 00 00 97 d8 60 e3 00      00:01:07.188  READ DMA
  f8 00 00 00 00 00 e0 00      00:01:07.188  READ NATIVE MAX ADDRESS
  ec 00 00 00 00 00 a0 02      00:01:07.180  IDENTIFY DEVICE
  ef 03 45 00 00 00 a0 02      00:01:07.180  SET FEATURES [Set transfer mode]
  f8 00 00 00 00 00 e0 00      00:01:07.180  READ NATIVE MAX ADDRESS

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     12666         -
# 2  Extended offline    Completed without error       00%     12661         -
# 3  Extended offline    Completed without error       00%     12660         -
# 4  Short offline       Completed without error       00%     12659         -
# 5  Extended offline    Aborted by host               90%     11047         -
# 6  Short offline       Completed without error       00%     11047         -
# 7  Short offline       Completed without error       00%         3         -
# 8  Short offline       Completed without error       00%         2         -
# 9  Short offline       Completed without error       00%         1         -
#10  Short offline       Completed without error       00%         1         -
#11  Short offline       Completed without error       00%         0         -

Device does not support Selective Self Tests/Logging

u LBA_of_first_error nikde nic :-(

Linuxové návody, fotky, zápisky z cest.

V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

Offtopic diskuse použijte pro diskusi mimo záběr našeho portálu (včelařství, windows), která by měla být smazána.
Duplicitní diskuse je určena pro případ, kdy uživatel odeslal svůj dotaz několikrát.
Návrh na cenzuru použijte, pokud komentář obsahuje urážky, vulgarismy nebo porušuje zákony.
Návrh na smazání komentáře je velmi neobvyklá akce používaná obvykle při nepovolené reklamě či spamu, výkřicích psychicky nemocných jedinců (ještírci) nebo pro smazání duplikátních komentářů.
Oprava formátování je žádost pro úpravu formy příspěvku, například pokud někdo píše bez odstavců nebo použije PRE pro celý komentář. Žádosti o změnu obsahu budou zamítnuty.

Vaše jméno
Váš email
Typ požadavku

Slovní popis