Administrace komentářů

xbmc@HTPC:~$ setserial /dev/ttyS1 uart none
xbmc@HTPC:~$ modprobe lirc_dev
xbmc@HTPC:~$ modprobe lirc_serial
xbmc@HTPC:~$ sudo mode2 -d /dev/lirc0
[sudo] password for xbmc:
space 4006965
pulse 9074
# mezitím jsou podobné kódy
space 2141
pulse 682

uceni tlacitek:
xbmc@HTPC:~$ sudo irrecord -d /dev/lirc0 /etc/lircd

irrecord -  application for recording IR-codes for usage with lirc

Copyright (C) 1998,1999 Christoph Bartelmus

This program will record the signals from your remote control
and create a config file for lircd.


A proper config file for lircd is maybe the most vital part of this
package, so you should invest some time to create a working config
file. Although I put a good deal of effort in this program it is often
not possible to automatically recognize all features of a remote
control. Often short-comings of the receiver hardware make it nearly
impossible. If you have problems to create a config file READ THE
DOCUMENTATION of this package, especially section "Adding new remote
controls" for how to get help.

If there already is a remote control of the same brand available at
http://www.lirc.org/remotes/ you might also want to try using such a
remote as a template. The config files already contain all
parameters of the protocol used by remotes of a certain brand and
knowing these parameters makes the job of this program much
easier. There are also template files for the most common protocols
available in the remotes/generic/ directory of the source
distribution of this package. You can use a template files by
providing the path of the file as command line parameter.

Please send the finished config files to lirc@bartelmus.de so that I
can make them available to others. Don't forget to put all information
that you can get about the remote control in the header of the file.

Press RETURN to continue.


Now enter the names for the buttons.

Please enter the name for the next button (press ENTER to finish recording)
KEY_DOWN

Now hold down button "KEY_DOWN".
Something went wrong. Please try again. (9 retries left)
Something went wrong. Please try again. (8 retries left)
irrecord: no data for 10 secs, aborting
The last button did not seem to generate any signal.
Press RETURN to continue.

No a to je ten problem