Administrace komentářů

Dobry den,

pokusam sa rozbehnut sambu ako PDC prepojenu na LDAP. Uz mi funguje prepojenie ako aj pripojenie k domene a prihlasenie sa do domeny pod Windows XP. Pokial sa chce do domeny pripojit Windows 7 hlasi "The trust relationship between this workstation and the primary domain failed". Pripojenie sietoveho disku pod window 7 funguje.

Stretol sa uz niekto z podobnym problemom?

Potrebujem winbind?

Verzia samby 3.6.3

Distro Ubuntu 12.04 LTS

Jadro 3.2.0-24-generic

na Windows stroji som menil subor lmhosts aby som sa nemusel spoliehat na WINS

10.0.0.228 NANO-RBF #PRE #DOM:NANO >> %systemroot%\system32\drivers\etc\lmhosts
10.0.0.228 "NANO           \0x1b" #PRE >> %systemroot%\system32\drivers\etc\lmhosts

a registre:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\lanmanworkstation\parameters]
"DomainCompatibilityMode"=dword:00000001
"DNSNameResolutionRequired"=dword:00000000

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters]
"requiresignorseal"=dword:00000000
"requirestrongkey"=dword:00000000
"signsecurechannel"=dword:00000000
"RequireSignOnSeal"=dword:00000000

[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\System]
"CompatibleRUPSecurity" = dword:00000001

Samba log

[2012/05/28 17:14:44.249154,  2] passdb/pdb_ldap.c:553(init_sam_from_ldap)
  init_sam_from_ldap: Entry found for user: virtual-pc$
[2012/05/28 17:14:44.250458,  2] ../libcli/auth/credentials.c:308(netlogon_creds_server_check_internal)
  credentials check failed
[2012/05/28 17:14:44.250543,  0] rpc_server/netlogon/srv_netlog_nt.c:976(_netr_ServerAuthenticate3)
  _netr_ServerAuthenticate3: netlogon_creds_server_check failed. Rejecting auth request from client VIRTUAL-PC machine account VIRTUAL-PC$

smb.conf

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = nanodesign
   netbios name = nano-rbf
   server signing = no

   os level = 255
   local master = yes


# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
;   dns proxy = yes

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = yes



#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m
   log level = 2

# Cap the size of the individual log files (in KiB).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
#   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d


####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = ldapsam:ldap://localhost
   ldap suffix = dc=nanodesign,dc=sk
   ldap admin dn = cn=admin,dc=nanodesign,dc=sk

   ldap machine suffix = ou=Computers
   ldap user suffix = ou=Users
   ldap group suffix = ou=Groups
   ldap idmap suffix = ou=Idmap
   ldap passwd sync = yes
   ldap delete dn = Yes

#   idmap backend = ldap
#   idmap alloc backend = ldap
#   idmap uid = 10000-20000
#   idmap gid = 10000-20000
#   ldapsam:editposix = yes
#   ldapsam:trusted = yes
#   idmap alloc config:ldap_url = ldap://localhost
#   idmap alloc config:ldap_user_dn = cn=admin,dc=nanodesign,dc=sk
#   idmap alloc config:ldap_base_dn = ou=idmaps,dc=nanodesign,dc=sk



   # Samba and LDAP server are on the same server in this example.
   ldap ssl = no

   # Scripts for Samba to use if it creates users, groups, etc.
   add user script = /usr/sbin/smbldap-useradd -m '%u'
   delete user script = /usr/sbin/smbldap-userdel %u
   add group script = /usr/sbin/smbldap-groupadd -p '%g'
   delete group script = /usr/sbin/smbldap-groupdel '%g'
   add user to group script = /usr/sbin/smbldap-groupmod -m '%u' '%g'
   delete user from group script = /usr/sbin/smbldap-groupmod -x '%u' '%g'
   set primary group script = /usr/sbin/smbldap-usermod -g '%g' '%u'

   # Script that Samba users when a PC joins the domain ..
   # (when changing 'Computer Properties' on the PC)
   add machine script = /usr/sbin/smbldap-useradd -w '%u'

   # Values used when a new user is created ..
   # (Note: '%L' does not work properly with smbldap-tools 0.9.4-1)
   logon drive = H:
   logon home = \\nano-rfb\%U
   logon path = \\nano-rbf\Profiles\%U
   logon script = logon.bat

   # This is required for Windows XP client ..
   server signing = auto
   server schannel = Auto

   obey pam restrictions = yes

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
   unix password sync = yes

   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
   pam password change = yes

# This option controls how unsuccessful authentication attempts are mapped
# to anonymous connections
   map to guest = bad user

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
# (this is Samba's default)
#   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
#   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
	# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

# This allows machine accounts to be created on the domain controller via the 
# SAMR RPC pipe.  
# The following assumes a "machines" group exists on the system
; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u

# This allows Unix groups to be created on the domain controller via the SAMR
# RPC pipe.  
; add group script = /usr/sbin/addgroup --force-badname %g

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
#   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
   domain master = Yes

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

# The following was the default behaviour in sarge,
# but samba upstream reverted the default because it might induce
# performance issues in large organizations.
# See Debian bug #368251 for some of the consequences of *not*
# having this setting and smb.conf(5) for details.
;   winbind enum groups = yes
;   winbind enum users = yes

# Setup usershare options to enable non-root users to share folders
# with the net usershare command.

# Maximum number of usershare. 0 (default) means that usershare is disabled.
;   usershare max shares = 100

# Allow users who've been granted usershare privileges to create
# public shares, not just authenticated ones
   usershare allow guests = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares. This will share each 
# user's home director as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, the home directories are exported read-only. Change the
# next parameter to 'no' if you want to be able to write to them.
;   read only = yes

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server. Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# The following parameter makes sure that only "username" can connect
#
# This might need tweaking when using external authentication schemes
;   valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   read only = yes

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

#[printers]
#   comment = All Printers
#   browseable = no
#   path = /var/spool/samba
#   printable = yes
#   guest ok = no
#   read only = yes
#   create mask = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
#[print$]
#   comment = Printer Drivers
#   path = /var/lib/samba/printers
#   browseable = yes
#   read only = yes
#   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# You may need to replace 'lpadmin' with the name of the group your
# admin users are members of.
# Please note that you also need to set appropriate Unix permissions
# to the drivers directory for these users to have write rights in it
;   write list = root, @lpadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   read only = yes
;   locking = no
;   path = /cdrom
;   guest ok = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#	cdrom share is accesed. For this to work /etc/fstab must contain
#	an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#	is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[homes]
        comment = Home Directories
        valid users = %S
        read only = No
        browseable = No
#	path = /data/samba/home/%u

[netlogon]
        comment = Network Logon Service
        path = /data/samba/netlogon
        admin users = root
        guest ok = Yes
        browseable = No

[Profiles]
        comment = Roaming Profile Share
        # would probably change this to elsewhere in a production system ..
        path = /data/samba/profiles
        read only = No
        profile acls = Yes
        browsable = No

[test-share]
	comment = FU
	path = /data/test
	valid users = @test1
	admin users = @test2
	browsable = Yes
	writeable = yes

Dakujem