Administrace komentářů

Tohle je můj starý hostapd.conf, který jsem používal s hostap_pci:

interface=wlan0
driver=hostap
logger_syslog=-1
logger_syslog_level=2
logger_stdout=-1
logger_stdout_level=2
dump_file=/tmp/hostapd.dump
ctrl_interface=/var/run/hostapd
ctrl_interface_group=0
ssid=bay-rout
country_code=CZ
ieee80211d=1
hw_mode=b
channel=0
beacon_int=100
dtim_period=2
max_num_sta=255
rts_threshold=2347
fragm_threshold=2346
macaddr_acl=0
auth_algs=3
ignore_broadcast_ssid=0
wme_enabled=1
wme_ac_bk_cwmin=4
wme_ac_bk_cwmax=10
wme_ac_bk_aifs=7
wme_ac_bk_txop_limit=0
wme_ac_bk_acm=0
wme_ac_be_aifs=3
wme_ac_be_cwmin=4
wme_ac_be_cwmax=10
wme_ac_be_txop_limit=0
wme_ac_be_acm=0
wme_ac_vi_aifs=2
wme_ac_vi_cwmin=3
wme_ac_vi_cwmax=4
wme_ac_vi_txop_limit=94
wme_ac_vi_acm=0
wme_ac_vo_aifs=2
wme_ac_vo_cwmin=2
wme_ac_vo_cwmax=3
wme_ac_vo_txop_limit=47
wme_ac_vo_acm=0
eapol_key_index_workaround=0
eap_server=0
own_ip_addr=127.0.0.1
wpa=1
wpa_psk_file=/etc/hostapd/hostapd.wpa_psk
wpa_key_mgmt=WPA-PSK
wpa_pairwise=TKIP CCMP

Kanál a výkon jsem nastavoval v init scriptu před spuštěním hostapd.

A tohle jsem našel v syslogu:

Sep  3 20:29:09 bay-rout kernel: wifi0: enabling hostapd mode
Sep  3 20:29:09 bay-rout kernel: wifi0: registered netdevice wlan0ap
Sep  3 20:29:09 bay-rout kernel: lib80211_crypt: registered algorithm 'TKIP'
Sep  3 20:29:10 bay-rout kernel: wlan0: Disabling ALC
[To je hotová inicializace, pak se připojuje první klient]
Sep  4 10:00:23 bay-rout hostapd: wlan0: STA a4:67:06:32:1c:93 IEEE 802.11: authenticated
Sep  4 10:00:23 bay-rout hostapd: wlan0: STA a4:67:06:32:1c:93 IEEE 802.11: associated (aid 1)
Sep  4 10:00:23 bay-rout radvd[3231]: attempting to reread config file
Sep  4 10:00:23 bay-rout radvd[3231]: resuming normal operation
Sep  4 10:00:23 bay-rout kernel: lib80211_crypt: registered algorithm 'CCMP'
Sep  4 10:00:23 bay-rout hostapd: wlan0: STA a4:67:06:32:1c:93 RADIUS: starting accounting session 5044F6F5-00000000
Sep  4 10:00:23 bay-rout hostapd: wlan0: STA a4:67:06:32:1c:93 WPA: pairwise key handshake completed (WPA)
Sep  4 10:00:23 bay-rout hostapd: wlan0: STA a4:67:06:32:1c:93 WPA: group key handshake completed (WPA)
[Tady je už klient asociovaný a pak už následuje DHCP]

Tohle jsou kusy konfiguráku jádra:

#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WIRELESS_EXT=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_WEXT_SPY=y
CONFIG_WEXT_PRIV=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_INTERNAL_REGDB is not set
# CONFIG_CFG80211_WEXT is not set
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=m
CONFIG_LIB80211_CRYPT_WEP=m
CONFIG_LIB80211_CRYPT_CCMP=m
CONFIG_LIB80211_CRYPT_TKIP=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
# CONFIG_MAC80211_RC_PID is not set
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
CONFIG_RFKILL=m
CONFIG_RFKILL_INPUT=y
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set

CONFIG_WLAN=y
CONFIG_HOSTAP=m
CONFIG_HOSTAP_FIRMWARE=y
CONFIG_HOSTAP_FIRMWARE_NVRAM=y
# CONFIG_HOSTAP_PLX is not set
CONFIG_HOSTAP_PCI=m

A pak tam mám spoustu šifrovacích a hašovacích funkcí, ale většinu kvůli IPsecu, takže netuším, co z nich je potřeba pro hostapd.