abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
Přihlášení | Registrace
×
napište » Zprávičky
inzerujte » Pracovní nabídky
    Pozvánka na 211. sraz spolku OpenAlt
    včera 17:33 | Pozvánky

    Spolek OpenAlt zve příznivce otevřených řešení a přístupu na 211. sraz, který proběhne v pátek 19. září od 18:00 ve Studentském klubu U Kachničky na Fakultě informačních technologií Vysokého učení technického na adrese Božetěchova 2/1. Na srazu proběhne přednáška Jiřího Eischmanna o nové verzi prostředí GNOME 49. Nemáte-li možnost se zúčastnit osobně, přednáškový blok bude opět streamován živě na server VHSky.cz a následně i zpřístupněn záznam.

    Ladislav Hagara | Komentářů: 0
    Microsoft se vyhnul pokutě EU, slíbil oddělit Teams od programů Office
    včera 01:33 | IT novinky

    Microsoft se vyhnul pokutě od Evropské komise za zneužívání svého dominantního postavení na trhu v souvislosti s aplikací Teams. S komisí se dohodl na závazcích, které slíbil splnit. Unijní exekutivě se nelíbilo, že firma svazuje svůj nástroj pro chatování a videohovory Teams se sadou kancelářských programů Office. Microsoft nyní slíbil jasné oddělení aplikace od kancelářských nástrojů, jako jsou Word, Excel a Outlook. Na Microsoft si

    … více »
    Ladislav Hagara | Komentářů: 3
    Samba 4.23.0
    12.9. 14:00 | Nová verze

    Samba (Wikipedie), svobodná implementace SMB a Active Directory, byla vydána ve verzi 4.23.0. Počínaje verzí Samba 4.23 jsou unixová rozšíření SMB3 ve výchozím nastavení povolena. Přidána byla podpora SMB3 přes QUIC. Nová utilita smb_prometheus_endpoint exportuje metriky ve formátu Prometheus.

    Ladislav Hagara | Komentářů: 0
    F-Droid: Jak FOSS projekty řeší žádosti o odstranění nelegálního obsahu
    12.9. 12:00 | Zajímavý článek

    Správcovský tým repozitáře F-Droid pro Android sdílí doporučení, jak řešit žádosti o odstranění nelegálního obsahu. Základem je mít nastavené formální procesy, vyhrazenou e-mailovou adresu a být transparentní. Zdůrazňují také důležitost volby jurisdikce (F-Droid je v Nizozemsku).

    🇵🇸 | Komentářů: 20
    Další zranitelnost v procesorech: VMScape (CVE-2025-40300)
    12.9. 05:33 | Bezpečnostní upozornění

    Byly publikovány informace o další zranitelnosti v procesorech. Nejnovější zranitelnost byla pojmenována VMScape (CVE-2025-40300, GitHub) a v upstream Linuxech je již opravena. Jedná se o variantu Spectre. KVM host může číst data z uživatelského prostoru hypervizoru, např. QEMU.

    Ladislav Hagara | Komentářů: 0
    Apache Software Foundation má nové logo
    11.9. 22:00 | Komunita

    V červenci loňského roku organizace Apache Software Foundation (ASF) oznámila, že se částečně přestane dopouštět kulturní apropriace a změní své logo. Dnes bylo nové logo představeno. "Indiánské pírko" bylo nahrazeno dubovým listem a text Apache Software Foundation zkratkou ASF. Slovo Apache se bude "zatím" dál používat. Oficiální název organizace zůstává Apache Software Foundation, stejně jako názvy projektů, například Apache HTTP Server.

    Ladislav Hagara | Komentářů: 14
    Visual Studio Code a VSCodium 1.104
    11.9. 17:33 | Nová verze

    Byla vydána (𝕏) srpnová aktualizace aneb nová verze 1.104 editoru zdrojových kódů Visual Studio Code (Wikipedie). Přehled novinek i s náhledy a videi v poznámkách k vydání. Ve verzi 1.104 vyjde také VSCodium, tj. komunitní sestavení Visual Studia Code bez telemetrie a licenčních podmínek Microsoftu.

    Ladislav Hagara | Komentářů: 1
    Spotify spustilo přehrávání v bezztrátové kvalitě
    11.9. 15:33 | IT novinky

    Spotify spustilo přehrávání v bezztrátové kvalitě. V předplatném Spotify Premium.

    Ladislav Hagara | Komentářů: 0
    Ellison vystřídal Muska na postu nejbohatšího člověka světa
    11.9. 15:00 | IT novinky

    Spoluzakladatel a předseda správní rady americké softwarové společnosti Oracle Larry Ellison vystřídal spoluzakladatele automobilky Tesla a dalších firem Elona Muska na postu nejbohatšího člověka světa. Hodnota Ellisonova majetku díky dnešnímu prudkému posílení ceny akcií Oraclu odpoledne vykazovala nárůst o více než 100 miliard dolarů a dosáhla 393 miliard USD (zhruba 8,2 bilionu Kč). Hodnota Muskova majetku činila zhruba 385 miliard dolarů.

    Ladislav Hagara | Komentářů: 7
    Eclipse IDE 2025-09 aneb Eclipse 4.37
    10.9. 21:22 | Nová verze

    Bylo vydáno Eclipse IDE 2025-09 aneb Eclipse 4.37. Představení novinek tohoto integrovaného vývojového prostředí také na YouTube.

    Ladislav Hagara | Komentářů: 0
    Centrum | Napsat | Starší
    navrhněte » Anketa
    Pro otevření více webových stránek ve webovém prohlížečí používám
     (82%)
     (6%)
     (3%)
     (3%)
     (4%)
     (2%)
    Celkem 171 hlasů
     Komentářů: 12, poslední 10.9. 13:00
    Rozcestník
    AbcLinuxu
    HDmag.cz

    Administrace komentářů

    Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

    Příspěvek
    29.5.2017 09:54 Michal
    Rozbalit Rozbalit vše Mrtvy radic nebo disky nebo softwarovy problem?
    Zdravim, dnes po probuzeni me uvitalo tohle: 
    May 29 07:22:46 ZFS2 kernel: [2302957.838488] ata10.00: exception Emask 0x0 SAct 0x8 SErr 0x0 action 0x0
May 29 07:22:46 ZFS2 kernel: [2302957.838496] ata10.00: irq_stat 0x40000008
May 29 07:22:46 ZFS2 kernel: [2302957.838500] ata10.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:46 ZFS2 kernel: [2302957.838509] ata10.00: cmd 61/e0:18:70:1c:e3/00:00:ff:00:00/40 tag 3 ncq dma 114688 out
May 29 07:22:46 ZFS2 kernel: [2302957.838509]          res 41/10:00:70:1c:e3/00:00:ff:00:00/40 Emask 0x481 (invalid argument) [ F>
May 29 07:22:46 ZFS2 kernel: [2302957.838513] ata10.00: status: { DRDY ERR }
May 29 07:22:46 ZFS2 kernel: [2302957.838516] ata10.00: error: { IDNF }
May 29 07:22:46 ZFS2 kernel: [2302957.840001] ata10.00: configured for UDMA/133
May 29 07:22:46 ZFS2 kernel: [2302957.840050] sd 9:0:0:0: [sdk] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:22:46 ZFS2 kernel: [2302957.840054] sd 9:0:0:0: [sdk] tag#3 Sense Key : Illegal Request [current]
May 29 07:22:46 ZFS2 kernel: [2302957.840058] sd 9:0:0:0: [sdk] tag#3 Add. Sense: Logical block address out of range
May 29 07:22:46 ZFS2 kernel: [2302957.840068] sd 9:0:0:0: [sdk] tag#3 CDB: Write(16) 8a 00 00 00 00 00 ff e3 1c 70 00 00 00 e0 00 00
May 29 07:22:46 ZFS2 kernel: [2302957.840072] blk_update_request: I/O error, dev sdk, sector 4293074032
May 29 07:22:46 ZFS2 kernel: [2302957.840103] ata10: EH complete
May 29 07:22:46 ZFS2 zed: eid=821755 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821756 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821757 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821758 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821759 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821760 class=io pool=data
May 29 07:22:46 ZFS2 zed: eid=821761 class=io pool=data
May 29 07:22:59 ZFS2 kernel: [2302970.856130] ata9.00: exception Emask 0x0 SAct 0xfe00 SErr 0x0 action 0x6 frozen
May 29 07:22:59 ZFS2 kernel: [2302970.856140] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856149] ata9.00: cmd 61/e0:48:e0:0d:e3/00:00:ff:00:00/40 tag 9 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856149]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856153] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856156] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856163] ata9.00: cmd 61/e0:50:c0:0e:e3/00:00:ff:00:00/40 tag 10 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856163]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856167] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856170] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856176] ata9.00: cmd 61/e0:58:a0:0f:e3/00:00:ff:00:00/40 tag 11 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856176]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856179] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856182] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856189] ata9.00: cmd 61/e0:60:80:10:e3/00:00:ff:00:00/40 tag 12 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856189]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856192] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856195] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856201] ata9.00: cmd 61/e0:68:60:11:e3/00:00:ff:00:00/40 tag 13 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856201]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856205] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856207] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856214] ata9.00: cmd 61/e0:70:40:12:e3/00:00:ff:00:00/40 tag 14 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856214]          res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856217] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856220] ata9.00: failed command: WRITE FPDMA QUEUED
May 29 07:22:59 ZFS2 kernel: [2302970.856226] ata9.00: cmd 61/e0:78:20:13:e3/00:00:ff:00:00/40 tag 15 ncq dma 114688 out
May 29 07:22:59 ZFS2 kernel: [2302970.856226]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:22:59 ZFS2 kernel: [2302970.856230] ata9.00: status: { DRDY }
May 29 07:22:59 ZFS2 kernel: [2302970.856236] ata9: hard resetting link
May 29 07:23:04 ZFS2 kernel: [2302976.208064] ata9: link is slow to respond, please be patient (ready=0)
May 29 07:23:09 ZFS2 kernel: [2302980.892057] ata9: COMRESET failed (errno=-16)
May 29 07:23:09 ZFS2 kernel: [2302980.892067] ata9: hard resetting link
May 29 07:23:14 ZFS2 kernel: [2302986.244053] ata9: link is slow to respond, please be patient (ready=0)
May 29 07:23:19 ZFS2 kernel: [2302990.924063] ata9: COMRESET failed (errno=-16)
May 29 07:23:19 ZFS2 kernel: [2302990.924071] ata9: hard resetting link
May 29 07:23:20 ZFS2 kernel: [2302991.776077] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:23:25 ZFS2 kernel: [2302996.956079] ata9.00: qc timeout (cmd 0xec)
May 29 07:23:25 ZFS2 kernel: [2302996.957165] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:23:25 ZFS2 kernel: [2302996.957181] ata9.00: revalidation failed (errno=-5)
May 29 07:23:25 ZFS2 kernel: [2302996.957190] ata9: hard resetting link
May 29 07:23:30 ZFS2 kernel: [2303002.316061] ata9: link is slow to respond, please be patient (ready=0)
May 29 07:23:35 ZFS2 kernel: [2303006.996057] ata9: COMRESET failed (errno=-16)
May 29 07:23:35 ZFS2 kernel: [2303006.996065] ata9: hard resetting link
May 29 07:23:40 ZFS2 kernel: [2303012.352061] ata9: link is slow to respond, please be patient (ready=0)
May 29 07:23:45 ZFS2 kernel: [2303017.036052] ata9: COMRESET failed (errno=-16)
May 29 07:23:45 ZFS2 kernel: [2303017.036062] ata9: hard resetting link
May 29 07:23:46 ZFS2 kernel: [2303017.960120] ata10.00: exception Emask 0x0 SAct 0x20000 SErr 0x0 action 0x6 frozen
May 29 07:23:46 ZFS2 kernel: [2303017.960128] ata10.00: failed command: WRITE FPDMA QUEUED
May 29 07:23:46 ZFS2 kernel: [2303017.960134] ata10.00: cmd 61/e0:88:18:17:fe/00:00:fe:00:00/40 tag 17 ncq dma 114688 out
May 29 07:23:46 ZFS2 kernel: [2303017.960134]          res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:23:46 ZFS2 kernel: [2303017.960137] ata10.00: status: { DRDY }
May 29 07:23:46 ZFS2 kernel: [2303017.960141] ata10: hard resetting link
May 29 07:23:47 ZFS2 kernel: [2303018.774838] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:23:50 ZFS2 kernel: [2303022.388062] ata9: link is slow to respond, please be patient (ready=0)
May 29 07:23:52 ZFS2 kernel: [2303023.836066] ata10.00: qc timeout (cmd 0xec)
May 29 07:23:52 ZFS2 kernel: [2303024.336082] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:23:52 ZFS2 kernel: [2303024.336086] ata10.00: revalidation failed (errno=-5)
May 29 07:23:52 ZFS2 kernel: [2303024.336108] ata10: hard resetting link
May 29 07:23:53 ZFS2 kernel: [2303025.150872] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:24:03 ZFS2 kernel: [2303035.356040] ata10.00: qc timeout (cmd 0xec)
May 29 07:24:04 ZFS2 kernel: [2303035.856863] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:24:04 ZFS2 kernel: [2303035.856879] ata10.00: revalidation failed (errno=-5)
May 29 07:24:04 ZFS2 kernel: [2303035.856886] ata10: limiting SATA link speed to 3.0 Gbps
May 29 07:24:04 ZFS2 kernel: [2303035.856891] ata10: hard resetting link
May 29 07:24:05 ZFS2 kernel: [2303036.670833] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:24:20 ZFS2 kernel: [2303052.096063] ata9: COMRESET failed (errno=-16)
May 29 07:24:20 ZFS2 kernel: [2303052.096072] ata9: limiting SATA link speed to 3.0 Gbps
May 29 07:24:20 ZFS2 kernel: [2303052.096074] ata9: hard resetting link
May 29 07:24:25 ZFS2 kernel: [2303057.148063] ata9: COMRESET failed (errno=-16)
May 29 07:24:25 ZFS2 kernel: [2303057.148074] ata9: reset failed, giving up
May 29 07:24:25 ZFS2 kernel: [2303057.148078] ata9.00: disabled
May 29 07:24:25 ZFS2 kernel: [2303057.148129] sd 8:0:0:0: [sdj] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148133] sd 8:0:0:0: [sdj] tag#9 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148135] sd 8:0:0:0: [sdj] tag#9 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148140] sd 8:0:0:0: [sdj] tag#9 CDB: Write(16) 8a 00 00 00 00 00 ff e3 0d e0 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148142] blk_update_request: I/O error, dev sdj, sector 4293070304
May 29 07:24:25 ZFS2 kernel: [2303057.148166] sd 8:0:0:0: [sdj] tag#10 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148169] sd 8:0:0:0: [sdj] tag#10 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148171] sd 8:0:0:0: [sdj] tag#10 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148174] sd 8:0:0:0: [sdj] tag#10 CDB: Write(16) 8a 00 00 00 00 00 ff e3 0e c0 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148176] blk_update_request: I/O error, dev sdj, sector 4293070528
May 29 07:24:25 ZFS2 kernel: [2303057.148189] sd 8:0:0:0: [sdj] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148191] sd 8:0:0:0: [sdj] tag#11 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148194] sd 8:0:0:0: [sdj] tag#11 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148196] sd 8:0:0:0: [sdj] tag#11 CDB: Write(16) 8a 00 00 00 00 00 ff e3 0f a0 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148198] blk_update_request: I/O error, dev sdj, sector 4293070752
May 29 07:24:25 ZFS2 kernel: [2303057.148210] sd 8:0:0:0: [sdj] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148212] sd 8:0:0:0: [sdj] tag#12 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148214] sd 8:0:0:0: [sdj] tag#12 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148217] sd 8:0:0:0: [sdj] tag#12 CDB: Write(16) 8a 00 00 00 00 00 ff e3 10 80 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148218] blk_update_request: I/O error, dev sdj, sector 4293070976
May 29 07:24:25 ZFS2 kernel: [2303057.148236] sd 8:0:0:0: [sdj] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148240] sd 8:0:0:0: [sdj] tag#13 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148243] sd 8:0:0:0: [sdj] tag#13 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148247] sd 8:0:0:0: [sdj] tag#13 CDB: Write(16) 8a 00 00 00 00 00 ff e3 11 60 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148249] blk_update_request: I/O error, dev sdj, sector 4293071200
May 29 07:24:25 ZFS2 kernel: [2303057.148267] sd 8:0:0:0: [sdj] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148270] sd 8:0:0:0: [sdj] tag#14 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148272] sd 8:0:0:0: [sdj] tag#14 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148275] sd 8:0:0:0: [sdj] tag#14 CDB: Write(16) 8a 00 00 00 00 00 ff e3 12 40 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148276] blk_update_request: I/O error, dev sdj, sector 4293071424
May 29 07:24:25 ZFS2 kernel: [2303057.148288] sd 8:0:0:0: [sdj] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:25 ZFS2 kernel: [2303057.148290] sd 8:0:0:0: [sdj] tag#15 Sense Key : Not Ready [current]
May 29 07:24:25 ZFS2 kernel: [2303057.148292] sd 8:0:0:0: [sdj] tag#15 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:25 ZFS2 kernel: [2303057.148295] sd 8:0:0:0: [sdj] tag#15 CDB: Write(16) 8a 00 00 00 00 00 ff e3 13 20 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148296] blk_update_request: I/O error, dev sdj, sector 4293071648
May 29 07:24:25 ZFS2 kernel: [2303057.148306] ata9: EH complete
May 29 07:24:25 ZFS2 kernel: [2303057.148491] sd 8:0:0:0: [sdj] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148496] sd 8:0:0:0: [sdj] tag#26 CDB: Write(16) 8a 00 00 00 00 00 ff e3 14 00 00 00 00 e8 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148499] blk_update_request: I/O error, dev sdj, sector 4293071872
May 29 07:24:25 ZFS2 kernel: [2303057.148612] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148613] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148617] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148618] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148628] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148632] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148634] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148638] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148668] sd 8:0:0:0: [sdj] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148673] sd 8:0:0:0: [sdj] tag#16 CDB: Write(16) 8a 00 00 00 00 00 ff e3 14 e8 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148676] blk_update_request: I/O error, dev sdj, sector 4293072104
May 29 07:24:25 ZFS2 kernel: [2303057.148678] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148681] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148687] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148691] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148804] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148808] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148809] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148811] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148815] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148818] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148820] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148822] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148825] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148826] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148856] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148860] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148875] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148879] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.148953] sd 8:0:0:0: [sdj] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.148958] sd 8:0:0:0: [sdj] tag#18 CDB: Write(16) 8a 00 00 00 00 00 ff e3 15 c8 00 00 00 e0 00 00
May 29 07:24:25 ZFS2 kernel: [2303057.148960] blk_update_request: I/O error, dev sdj, sector 4293072328
May 29 07:24:25 ZFS2 kernel: [2303057.149001] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.149003] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.149281] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.149284] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.149330] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.149333] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.149336] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.149338] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:25 ZFS2 kernel: [2303057.149437] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:25 ZFS2 kernel: [2303057.149438] sd 8:0:0:0: [sdj] Sense not available.
May 29 07:24:27 ZFS2 kernel: [2303058.908135] INFO: task txg_sync:2375 blocked for more than 120 seconds.
May 29 07:24:27 ZFS2 kernel: [2303058.908143]       Tainted: P           OE   4.8.0-49-generic #52~16.04.1-Ubuntu
May 29 07:24:27 ZFS2 kernel: [2303058.908145] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 29 07:24:27 ZFS2 kernel: [2303058.908148] txg_sync        D ffff8ccb53273ab8     0  2375      2 0x00000000
May 29 07:24:27 ZFS2 kernel: [2303058.908154]  ffff8ccb53273ab8 ffff8ccb7677d880 ffff8ccb785ac9c0 ffff8ccb5326c9c0
May 29 07:24:27 ZFS2 kernel: [2303058.908158]  ffff8ccb53273ae8 ffff8ccb53274000 ffff8ccb7f419300 7fffffffffffffff
May 29 07:24:27 ZFS2 kernel: [2303058.908162]  ffff8cbca2300360 0000000000000001 ffff8ccb53273ad0 ffffffffa2e96065
May 29 07:24:27 ZFS2 kernel: [2303058.908165] Call Trace:
May 29 07:24:27 ZFS2 kernel: [2303058.908176]  [[ffffffffa2e96065>] schedule+0x35/0x80
May 29 07:24:27 ZFS2 kernel: [2303058.908180]  [[ffffffffa2e99895>] schedule_timeout+0x235/0x3f0
May 29 07:24:27 ZFS2 kernel: [2303058.908184]  [[ffffffffa26c6db2>] ? __wake_up_common+0x52/0x90
May 29 07:24:27 ZFS2 kernel: [2303058.908189]  [[ffffffffa26fcabc>] ? ktime_get+0x3c/0xb0
May 29 07:24:27 ZFS2 kernel: [2303058.908192]  [[ffffffffa2e95834>] io_schedule_timeout+0xa4/0x110
May 29 07:24:27 ZFS2 kernel: [2303058.908206]  [[ffffffffc0793c42>] cv_wait_common+0xb2/0x130 [spl]
May 29 07:24:27 ZFS2 kernel: [2303058.908209]  [[ffffffffa26c7480>] ? wake_atomic_t_function+0x60/0x60
May 29 07:24:27 ZFS2 kernel: [2303058.908218]  [[ffffffffc0793d18>] __cv_wait_io+0x18/0x20 [spl]
May 29 07:24:27 ZFS2 kernel: [2303058.908290]  [[ffffffffc0a9e65d>] zio_wait+0xfd/0x1d0 [zfs]
May 29 07:24:27 ZFS2 kernel: [2303058.908337]  [[ffffffffc0a29fc8>] dsl_pool_sync+0xb8/0x460 [zfs]
May 29 07:24:27 ZFS2 kernel: [2303058.908388]  [[ffffffffc0a45064>] spa_sync+0x374/0xb30 [zfs]
May 29 07:24:27 ZFS2 kernel: [2303058.908392]  [[ffffffffa26af012>] ? default_wake_function+0x12/0x20
May 29 07:24:27 ZFS2 kernel: [2303058.908447]  [[ffffffffc0a55c86>] txg_sync_thread+0x3a6/0x610 [zfs]
May 29 07:24:27 ZFS2 kernel: [2303058.908451]  [[ffffffffa262c78c>] ? __switch_to+0x2dc/0x700
May 29 07:24:27 ZFS2 kernel: [2303058.908504]  [[ffffffffc0a558e0>] ? txg_delay+0x160/0x160 [zfs]
May 29 07:24:27 ZFS2 kernel: [2303058.908512]  [[ffffffffc078eee1>] thread_generic_wrapper+0x71/0x80 [spl]
May 29 07:24:27 ZFS2 kernel: [2303058.908519]  [[ffffffffc078ee70>] ? __thread_exit+0x20/0x20 [spl]
May 29 07:24:27 ZFS2 kernel: [2303058.908523]  [[ffffffffa26a3fb8>] kthread+0xd8/0xf0
May 29 07:24:27 ZFS2 kernel: [2303058.908526]  [[ffffffffa2e9aadf>] ret_from_fork+0x1f/0x40
May 29 07:24:27 ZFS2 kernel: [2303058.908530]  [[ffffffffa26a3ee0>] ? kthread_create_on_node+0x1e0/0x1e0
May 29 07:24:35 ZFS2 kernel: [2303067.100091] ata10.00: qc timeout (cmd 0xec)
May 29 07:24:35 ZFS2 kernel: [2303067.600181] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:24:35 ZFS2 kernel: [2303067.600186] ata10.00: revalidation failed (errno=-5)
May 29 07:24:35 ZFS2 kernel: [2303067.600192] ata10.00: disabled
May 29 07:24:36 ZFS2 kernel: [2303068.100984] ata10: hard resetting link
May 29 07:24:37 ZFS2 kernel: [2303068.914879] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:24:37 ZFS2 kernel: [2303069.412368] sd 9:0:0:0: [sdk] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:24:37 ZFS2 kernel: [2303069.412374] sd 9:0:0:0: [sdk] tag#17 Sense Key : Not Ready [current]
May 29 07:24:37 ZFS2 kernel: [2303069.412377] sd 9:0:0:0: [sdk] tag#17 Add. Sense: Logical unit not ready, hard reset required
May 29 07:24:37 ZFS2 kernel: [2303069.412382] sd 9:0:0:0: [sdk] tag#17 CDB: Write(16) 8a 00 00 00 00 00 fe fe 17 18 00 00 00 e0 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.412386] blk_update_request: I/O error, dev sdk, sector 4278064920
May 29 07:24:37 ZFS2 kernel: [2303069.412410] ata10: EH complete
May 29 07:24:37 ZFS2 kernel: [2303069.412559] sd 9:0:0:0: [sdk] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.412563] sd 9:0:0:0: [sdk] tag#18 CDB: Write(16) 8a 00 00 00 00 00 fe fe 17 f8 00 00 00 e0 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.412565] blk_update_request: I/O error, dev sdk, sector 4278065144
May 29 07:24:37 ZFS2 kernel: [2303069.412740] sd 9:0:0:0: [sdk] tag#22 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.412746] sd 9:0:0:0: [sdk] tag#22 CDB: Write(16) 8a 00 00 00 00 00 fe fe 18 d8 00 00 00 e0 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.412749] blk_update_request: I/O error, dev sdk, sector 4278065368
May 29 07:24:37 ZFS2 kernel: [2303069.412888] sd 9:0:0:0: [sdk] tag#26 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.412893] sd 9:0:0:0: [sdk] tag#26 CDB: Write(16) 8a 00 00 00 00 00 fe fe 19 b8 00 00 00 e8 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.412895] blk_update_request: I/O error, dev sdk, sector 4278065592
May 29 07:24:37 ZFS2 kernel: [2303069.412970] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.412972] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.412974] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.412975] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413031] sd 9:0:0:0: [sdk] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413034] sd 9:0:0:0: [sdk] tag#5 CDB: Write(16) 8a 00 00 00 00 00 fe fe 1a a0 00 00 00 e0 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.413036] blk_update_request: I/O error, dev sdk, sector 4278065824
May 29 07:24:37 ZFS2 kernel: [2303069.413068] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413071] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413081] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413086] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413127] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413131] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413164] sd 9:0:0:0: [sdk] tag#18 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413169] sd 9:0:0:0: [sdk] tag#18 CDB: Write(16) 8a 00 00 00 00 00 fe fe 1b 80 00 00 00 e0 00 00
May 29 07:24:37 ZFS2 kernel: [2303069.413171] blk_update_request: I/O error, dev sdk, sector 4278066048
May 29 07:24:37 ZFS2 kernel: [2303069.413188] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413191] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413214] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413216] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413300] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413302] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413447] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413450] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:24:37 ZFS2 kernel: [2303069.413600] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:24:37 ZFS2 kernel: [2303069.413604] sd 9:0:0:0: [sdk] Sense not available.
May 29 07:25:01 ZFS2 CRON[10087]: (root) CMD (command -v debian-sa1 > /dev/null && debian-sa1 1 1)
May 29 07:25:08 ZFS2 kernel: [2303099.880109] ata7.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x6 frozen
May 29 07:25:08 ZFS2 kernel: [2303099.880118] ata7.00: failed command: WRITE FPDMA QUEUED
May 29 07:25:08 ZFS2 kernel: [2303099.880125] ata7.00: cmd 61/08:10:e0:00:03/00:00:fe:00:00/40 tag 2 ncq dma 4096 out
May 29 07:25:08 ZFS2 kernel: [2303099.880125]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:25:08 ZFS2 kernel: [2303099.880129] ata7.00: status: { DRDY }
May 29 07:25:08 ZFS2 kernel: [2303099.880135] ata7: hard resetting link
May 29 07:25:08 ZFS2 kernel: [2303099.880151] ata8.00: exception Emask 0x0 SAct 0x4 SErr 0x0 action 0x6 frozen
May 29 07:25:08 ZFS2 kernel: [2303099.880176] ata8.00: failed command: WRITE FPDMA QUEUED
May 29 07:25:08 ZFS2 kernel: [2303099.880181] ata8.00: cmd 61/08:10:d8:00:03/00:00:fe:00:00/40 tag 2 ncq dma 4096 out
May 29 07:25:08 ZFS2 kernel: [2303099.880181]          res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
May 29 07:25:08 ZFS2 kernel: [2303099.880184] ata8.00: status: { DRDY }
May 29 07:25:08 ZFS2 kernel: [2303099.880188] ata8: hard resetting link
May 29 07:25:09 ZFS2 kernel: [2303100.694822] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:25:09 ZFS2 kernel: [2303100.694955] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:25:14 ZFS2 kernel: [2303105.756068] ata7.00: qc timeout (cmd 0xec)
May 29 07:25:14 ZFS2 kernel: [2303105.756081] ata8.00: qc timeout (cmd 0xec)
May 29 07:25:14 ZFS2 kernel: [2303106.256474] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:14 ZFS2 kernel: [2303106.256477] ata8.00: revalidation failed (errno=-5)
May 29 07:25:14 ZFS2 kernel: [2303106.256488] ata8: hard resetting link
May 29 07:25:14 ZFS2 kernel: [2303106.256989] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:14 ZFS2 kernel: [2303106.256991] ata7.00: revalidation failed (errno=-5)
May 29 07:25:14 ZFS2 kernel: [2303106.256995] ata7: hard resetting link
May 29 07:25:15 ZFS2 kernel: [2303107.070813] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:25:15 ZFS2 kernel: [2303107.070953] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
May 29 07:25:25 ZFS2 kernel: [2303117.276077] ata8.00: qc timeout (cmd 0xec)
May 29 07:25:25 ZFS2 kernel: [2303117.276103] ata7.00: qc timeout (cmd 0xec)
May 29 07:25:26 ZFS2 kernel: [2303117.776394] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:26 ZFS2 kernel: [2303117.776397] ata7.00: revalidation failed (errno=-5)
May 29 07:25:26 ZFS2 kernel: [2303117.776418] ata7: limiting SATA link speed to 3.0 Gbps
May 29 07:25:26 ZFS2 kernel: [2303117.776423] ata7: hard resetting link
May 29 07:25:26 ZFS2 kernel: [2303117.776829] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:26 ZFS2 kernel: [2303117.776830] ata8.00: revalidation failed (errno=-5)
May 29 07:25:26 ZFS2 kernel: [2303117.776834] ata8: limiting SATA link speed to 3.0 Gbps
May 29 07:25:26 ZFS2 kernel: [2303117.776836] ata8: hard resetting link
May 29 07:25:26 ZFS2 kernel: [2303118.590951] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:25:26 ZFS2 kernel: [2303118.591067] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:25:57 ZFS2 kernel: [2303149.020074] ata7.00: qc timeout (cmd 0xec)
May 29 07:25:57 ZFS2 kernel: [2303149.020083] ata8.00: qc timeout (cmd 0xec)
May 29 07:25:57 ZFS2 kernel: [2303149.520610] ata7.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:57 ZFS2 kernel: [2303149.520613] ata7.00: revalidation failed (errno=-5)
May 29 07:25:57 ZFS2 kernel: [2303149.520620] ata7.00: disabled
May 29 07:25:57 ZFS2 kernel: [2303149.520859] ata8.00: failed to IDENTIFY (I/O error, err_mask=0x4)
May 29 07:25:57 ZFS2 kernel: [2303149.520861] ata8.00: revalidation failed (errno=-5)
May 29 07:25:57 ZFS2 kernel: [2303149.520864] ata8.00: disabled
May 29 07:25:58 ZFS2 kernel: [2303150.020916] ata8: hard resetting link
May 29 07:25:58 ZFS2 kernel: [2303150.021015] ata7: hard resetting link
May 29 07:25:59 ZFS2 kernel: [2303150.834476] ata7: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:25:59 ZFS2 kernel: [2303150.834666] ata8: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
May 29 07:25:59 ZFS2 kernel: [2303151.332226] sd 7:0:0:0: [sdh] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:25:59 ZFS2 kernel: [2303151.332232] sd 7:0:0:0: [sdh] tag#2 Sense Key : Not Ready [current]
May 29 07:25:59 ZFS2 kernel: [2303151.332235] sd 7:0:0:0: [sdh] tag#2 Add. Sense: Logical unit not ready, hard reset required
May 29 07:25:59 ZFS2 kernel: [2303151.332240] sd 7:0:0:0: [sdh] tag#2 CDB: Write(16) 8a 00 00 00 00 00 fe 03 00 d8 00 00 00 08 00 00
May 29 07:25:59 ZFS2 kernel: [2303151.332244] blk_update_request: I/O error, dev sdh, sector 4261609688
May 29 07:25:59 ZFS2 kernel: [2303151.332270] ata8: EH complete
May 29 07:25:59 ZFS2 kernel: [2303151.332343] sd 6:0:0:0: [sdg] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
May 29 07:25:59 ZFS2 kernel: [2303151.332347] sd 6:0:0:0: [sdg] tag#2 Sense Key : Not Ready [current]
May 29 07:25:59 ZFS2 kernel: [2303151.332350] sd 6:0:0:0: [sdg] tag#2 Add. Sense: Logical unit not ready, hard reset required
May 29 07:25:59 ZFS2 kernel: [2303151.332353] sd 6:0:0:0: [sdg] tag#2 CDB: Write(16) 8a 00 00 00 00 00 fe 03 00 e0 00 00 00 08 00 00
May 29 07:25:59 ZFS2 kernel: [2303151.332356] blk_update_request: I/O error, dev sdg, sector 4261609696
May 29 07:25:59 ZFS2 kernel: [2303151.332376] ata7: EH complete
May 29 07:25:59 ZFS2 kernel: [2303151.332648] sd 7:0:0:0: [sdh] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:25:59 ZFS2 kernel: [2303151.332652] sd 7:0:0:0: [sdh] Sense not available.
May 29 07:25:59 ZFS2 kernel: [2303151.332707] sd 6:0:0:0: [sdg] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:25:59 ZFS2 kernel: [2303151.332710] sd 6:0:0:0: [sdg] Sense not available.
May 29 07:25:59 ZFS2 kernel: [2303151.332817] sd 7:0:0:0: [sdh] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:25:59 ZFS2 kernel: [2303151.332820] sd 7:0:0:0: [sdh] Sense not available.
May 29 07:25:59 ZFS2 kernel: [2303151.332870] sd 6:0:0:0: [sdg] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:25:59 ZFS2 kernel: [2303151.332872] sd 6:0:0:0: [sdg] Sense not available.
May 29 07:25:59 ZFS2 kernel: [2303151.338577] WARNING: Pool 'data' has encountered an uncorrectable I/O failure and has been suspended.
May 29 07:25:59 ZFS2 kernel: [2303151.338577]
May 29 07:25:59 ZFS2 zed: eid=821762 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821763 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821764 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821765 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821766 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821767 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821768 class=data pool=data
May 29 07:25:59 ZFS2 zed: eid=821769 class=io_failure pool=data
May 29 07:26:42 ZFS2 systemd[1]: Started CUPS Scheduler.
May 29 07:28:28 ZFS2 kernel: [2303300.572139] INFO: task txg_sync:2375 blocked for more than 120 seconds.
May 29 07:28:28 ZFS2 kernel: [2303300.572147]       Tainted: P           OE   4.8.0-49-generic #52~16.04.1-Ubuntu
May 29 07:28:28 ZFS2 kernel: [2303300.572149] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 29 07:28:28 ZFS2 kernel: [2303300.572152] txg_sync        D ffff8ccb53273ab8     0  2375      2 0x00000000
May 29 07:28:28 ZFS2 kernel: [2303300.572159]  ffff8ccb53273ab8 ffff8ccb7677d880 ffff8ccb785ac9c0 ffff8ccb5326c9c0
May 29 07:28:28 ZFS2 kernel: [2303300.572163]  ffff8ccb53273ae8 ffff8ccb53274000 ffff8ccb7f419300 7fffffffffffffff
May 29 07:28:28 ZFS2 kernel: [2303300.572166]  ffff8cbde0b394a0 0000000000000001 ffff8ccb53273ad0 ffffffffa2e96065
May 29 07:28:28 ZFS2 kernel: [2303300.572170] Call Trace:
May 29 07:28:28 ZFS2 kernel: [2303300.572180]  [[ffffffffa2e96065>] schedule+0x35/0x80
May 29 07:28:28 ZFS2 kernel: [2303300.572184]  [[ffffffffa2e99895>] schedule_timeout+0x235/0x3f0
May 29 07:28:28 ZFS2 kernel: [2303300.572188]  [[ffffffffa26c6db2>] ? __wake_up_common+0x52/0x90
May 29 07:28:28 ZFS2 kernel: [2303300.572192]  [[ffffffffa26fcabc>] ? ktime_get+0x3c/0xb0
May 29 07:28:28 ZFS2 kernel: [2303300.572196]  [[ffffffffa2e95834>] io_schedule_timeout+0xa4/0x110
May 29 07:28:28 ZFS2 kernel: [2303300.572210]  [[ffffffffc0793c42>] cv_wait_common+0xb2/0x130 [spl]
May 29 07:28:28 ZFS2 kernel: [2303300.572213]  [[ffffffffa26c7480>] ? wake_atomic_t_function+0x60/0x60
May 29 07:28:28 ZFS2 kernel: [2303300.572221]  [[ffffffffc0793d18>] __cv_wait_io+0x18/0x20 [spl]
May 29 07:28:28 ZFS2 kernel: [2303300.572294]  [[ffffffffc0a9e65d>] zio_wait+0xfd/0x1d0 [zfs]
May 29 07:28:28 ZFS2 kernel: [2303300.572341]  [[ffffffffc0a2a1ed>] dsl_pool_sync+0x2dd/0x460 [zfs]
May 29 07:28:28 ZFS2 kernel: [2303300.572392]  [[ffffffffc0a45064>] spa_sync+0x374/0xb30 [zfs]
May 29 07:28:28 ZFS2 kernel: [2303300.572397]  [[ffffffffa26af012>] ? default_wake_function+0x12/0x20
May 29 07:28:28 ZFS2 kernel: [2303300.572451]  [[ffffffffc0a55c86>] txg_sync_thread+0x3a6/0x610 [zfs]
May 29 07:28:28 ZFS2 kernel: [2303300.572455]  [[ffffffffa262c78c>] ? __switch_to+0x2dc/0x700
May 29 07:28:28 ZFS2 kernel: [2303300.572508]  [[ffffffffc0a558e0>] ? txg_delay+0x160/0x160 [zfs]
May 29 07:28:28 ZFS2 kernel: [2303300.572515]  [[ffffffffc078eee1>] thread_generic_wrapper+0x71/0x80 [spl]
May 29 07:28:28 ZFS2 kernel: [2303300.572522]  [[ffffffffc078ee70>] ? __thread_exit+0x20/0x20 [spl]
May 29 07:28:28 ZFS2 kernel: [2303300.572526]  [[ffffffffa26a3fb8>] kthread+0xd8/0xf0
May 29 07:28:28 ZFS2 kernel: [2303300.572529]  [[ffffffffa2e9aadf>] ret_from_fork+0x1f/0x40
May 29 07:28:28 ZFS2 kernel: [2303300.572533]  [[ffffffffa26a3ee0>] ? kthread_create_on_node+0x1e0/0x1e0
May 29 07:28:59 ZFS2 zed: eid=821770 class=io pool=data
May 29 07:28:59 ZFS2 kernel: [2303331.598561] WARNING: Pool 'data' has encountered an uncorrectable I/O failure and has been suspended.
May 29 07:28:59 ZFS2 kernel: [2303331.598561]
May 29 07:29:00 ZFS2 zed: eid=821771 class=io pool=data
May 29 07:29:00 ZFS2 zed: eid=821772 class=io pool=data
May 29 07:29:00 ZFS2 zed: eid=821773 class=io pool=data
May 29 07:29:00 ZFS2 zed: eid=821774 class=data pool=data
May 29 07:29:00 ZFS2 zed: eid=821775 class=io_failure pool=data
May 29 07:29:57 ZFS2 systemd[1]: Started Session 4610 of user miho.
May 29 07:30:02 ZFS2 CRON[10548]: (root) CMD (test -x /etc/init.d/anacron && /usr/sbin/invoke-rc.d anacron start >/dev/null)
May 29 07:30:02 ZFS2 systemd[1]: Started Run anacron jobs.
May 29 07:30:02 ZFS2 anacron[10570]: Anacron 2.3 started on 2017-05-29
May 29 07:30:02 ZFS2 anacron[10570]: Will run job `cron.daily' in 5 min.
May 29 07:30:02 ZFS2 anacron[10570]: Jobs will be executed sequentially
May 29 07:30:29 ZFS2 kernel: [2303421.404151] INFO: task txg_sync:2375 blocked for more than 120 seconds.
May 29 07:30:29 ZFS2 kernel: [2303421.404158]       Tainted: P           OE   4.8.0-49-generic #52~16.04.1-Ubuntu
May 29 07:30:29 ZFS2 kernel: [2303421.404159] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
May 29 07:30:29 ZFS2 kernel: [2303421.404162] txg_sync        D ffff8ccb53273ab8     0  2375      2 0x00000000
May 29 07:30:29 ZFS2 kernel: [2303421.404167]  ffff8ccb53273ab8 ffff8ccb7677d880 ffff8ccb785ac9c0 ffff8ccb5326c9c0
May 29 07:30:29 ZFS2 kernel: [2303421.404171]  ffff8ccb53273ae8 ffff8ccb53274000 ffff8ccb7f419300 7fffffffffffffff
May 29 07:30:29 ZFS2 kernel: [2303421.404173]  ffff8cbde0b394a0 0000000000000001 ffff8ccb53273ad0 ffffffffa2e96065
May 29 07:30:29 ZFS2 kernel: [2303421.404177] Call Trace:
May 29 07:30:29 ZFS2 kernel: [2303421.404185]  [[ffffffffa2e96065>] schedule+0x35/0x80
May 29 07:30:29 ZFS2 kernel: [2303421.404188]  [[ffffffffa2e99895>] schedule_timeout+0x235/0x3f0
May 29 07:30:29 ZFS2 kernel: [2303421.404192]  [[ffffffffa26c6db2>] ? __wake_up_common+0x52/0x90
May 29 07:30:29 ZFS2 kernel: [2303421.404195]  [[ffffffffa26fcabc>] ? ktime_get+0x3c/0xb0
May 29 07:30:29 ZFS2 kernel: [2303421.404198]  [[ffffffffa2e95834>] io_schedule_timeout+0xa4/0x110
May 29 07:30:29 ZFS2 kernel: [2303421.404210]  [[ffffffffc0793c42>] cv_wait_common+0xb2/0x130 [spl]
May 29 07:30:29 ZFS2 kernel: [2303421.404212]  [[ffffffffa26c7480>] ? wake_atomic_t_function+0x60/0x60
May 29 07:30:29 ZFS2 kernel: [2303421.404219]  [[ffffffffc0793d18>] __cv_wait_io+0x18/0x20 [spl]
May 29 07:30:29 ZFS2 kernel: [2303421.404280]  [[ffffffffc0a9e65d>] zio_wait+0xfd/0x1d0 [zfs]
May 29 07:30:29 ZFS2 kernel: [2303421.404318]  [[ffffffffc0a2a1ed>] dsl_pool_sync+0x2dd/0x460 [zfs]
May 29 07:30:29 ZFS2 kernel: [2303421.404361]  [[ffffffffc0a45064>] spa_sync+0x374/0xb30 [zfs]
May 29 07:30:29 ZFS2 kernel: [2303421.404365]  [[ffffffffa26af012>] ? default_wake_function+0x12/0x20
May 29 07:30:29 ZFS2 kernel: [2303421.404410]  [[ffffffffc0a55c86>] txg_sync_thread+0x3a6/0x610 [zfs]
May 29 07:30:29 ZFS2 kernel: [2303421.404413]  [[ffffffffa262c78c>] ? __switch_to+0x2dc/0x700
May 29 07:30:29 ZFS2 kernel: [2303421.404457]  [[ffffffffc0a558e0>] ? txg_delay+0x160/0x160 [zfs]
May 29 07:30:29 ZFS2 kernel: [2303421.404463]  [[ffffffffc078eee1>] thread_generic_wrapper+0x71/0x80 [spl]
May 29 07:30:29 ZFS2 kernel: [2303421.404469]  [[ffffffffc078ee70>] ? __thread_exit+0x20/0x20 [spl]
May 29 07:30:29 ZFS2 kernel: [2303421.404472]  [[ffffffffa26a3fb8>] kthread+0xd8/0xf0
May 29 07:30:29 ZFS2 kernel: [2303421.404475]  [[ffffffffa2e9aadf>] ret_from_fork+0x1f/0x40
May 29 07:30:29 ZFS2 kernel: [2303421.404477]  [[ffffffffa26a3ee0>] ? kthread_create_on_node+0x1e0/0x1e0
May 29 07:30:36 ZFS2 udisksd[4066]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD30EFRX_68EUZN0_WD_WMC4N2328418: Error updating SMART data: Error sending ATA command CHECK POWER MODE: Unexpected sense data returned:#0120000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#0120010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#012 (g-io-error-quark, 0)
May 29 07:30:36 ZFS2 kernel: [2303428.340749] sd 6:0:0:0: [sdg] tag#15 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:30:36 ZFS2 kernel: [2303428.340755] sd 6:0:0:0: [sdg] tag#15 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
May 29 07:30:36 ZFS2 udisksd[4066]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD30EFRX_68EUZN0_WD_WMC4N2402071: Error updating SMART data: Error sending ATA command CHECK POWER MODE: Unexpected sense data returned:#0120000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#0120010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#012 (g-io-error-quark, 0)
May 29 07:30:36 ZFS2 kernel: [2303428.445545] sd 8:0:0:0: [sdj] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:30:36 ZFS2 kernel: [2303428.445547] sd 8:0:0:0: [sdj] tag#16 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
May 29 07:30:36 ZFS2 udisksd[4066]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD30EFRX_68EUZN0_WD_WMC4N2401629: Error updating SMART data: Error sending ATA command CHECK POWER MODE: Unexpected sense data returned:#0120000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#0120010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#012 (g-io-error-quark, 0)
May 29 07:30:36 ZFS2 kernel: [2303428.589159] sd 9:0:0:0: [sdk] tag#23 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:30:36 ZFS2 kernel: [2303428.589163] sd 9:0:0:0: [sdk] tag#23 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
May 29 07:30:37 ZFS2 kernel: [2303428.843935] sd 7:0:0:0: [sdh] tag#16 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
May 29 07:30:37 ZFS2 kernel: [2303428.843938] sd 7:0:0:0: [sdh] tag#16 CDB: ATA command pass through(16) 85 06 20 00 00 00 00 00 00 00 00 00 00 00 e5 00
May 29 07:30:37 ZFS2 udisksd[4066]: Error performing housekeeping for drive /org/freedesktop/UDisks2/drives/WDC_WD30EFRX_68EUZN0_WD_WMC4N2327966: Error updating SMART data: Error sending ATA command CHECK POWER MODE: Unexpected sense data returned:#0120000: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#0120010: 00 00 00 00  00 00 00 00  00 00 00 00  00 00 00 00    ................#012 (g-io-error-quark, 0)
    Zkratka disky sdg,h,k,j vypadly. Vsechny visi na SATA controller: Marvell Technology Group Ltd. 88SE9230 PCIe SATA 6Gb/s Controller (rev 11)

    Po rebootu (a kratkem boji se ZFS aby pripojil pool) se zdalo byt vse ok. Tak jsem pustil scrub a za cca 45 minut: 
    [ 1836.508085] ata10.00: qc timeout (cmd 0x47)
[ 1836.509169] ata10.00: READ LOG DMA EXT failed, trying unqueued
[ 1836.509173] ata10: failed to read log page 10h (errno=-5)
[ 1836.509184] ata10.00: exception Emask 0x1 SAct 0x3c000 SErr 0x0 action 0x6 frozen
[ 1836.509187] ata10.00: irq_stat 0x40000008
[ 1836.509191] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1836.509199] ata10.00: cmd 61/08:70:68:09:00/00:00:00:00:00/40 tag 14 ncq dma 4096 out
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1836.509203] ata10.00: status: { DRDY }
[ 1836.509206] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1836.509213] ata10.00: cmd 61/08:78:68:0b:00/00:00:00:00:00/40 tag 15 ncq dma 4096 out
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1836.509216] ata10.00: status: { DRDY }
[ 1836.509219] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1836.509226] ata10.00: cmd 61/08:80:68:5d:50/00:00:5d:01:00/40 tag 16 ncq dma 4096 out
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1836.509229] ata10.00: status: { DRDY }
[ 1836.509232] ata10.00: failed command: WRITE FPDMA QUEUED
[ 1836.509238] ata10.00: cmd 61/08:88:68:5f:50/00:00:5d:01:00/40 tag 17 ncq dma 4096 out
                        res 50/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x1 (device error)
[ 1836.509242] ata10.00: status: { DRDY }
[ 1836.509248] ata10: hard resetting link
[ 1836.822760] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1836.824427] ata10.00: configured for UDMA/133
[ 1836.824448] sd 9:0:0:0: [sdk] tag#14 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1836.824452] sd 9:0:0:0: [sdk] tag#14 Sense Key : Illegal Request [current]
[ 1836.824456] sd 9:0:0:0: [sdk] tag#14 Add. Sense: Unaligned write command
[ 1836.824461] sd 9:0:0:0: [sdk] tag#14 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 68 00 00 00 08 00 00
[ 1836.824464] blk_update_request: I/O error, dev sdk, sector 2408
[ 1836.824489] sd 9:0:0:0: [sdk] tag#15 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1836.824492] sd 9:0:0:0: [sdk] tag#15 Sense Key : Illegal Request [current]
[ 1836.824495] sd 9:0:0:0: [sdk] tag#15 Add. Sense: Unaligned write command
[ 1836.824499] sd 9:0:0:0: [sdk] tag#15 CDB: Write(16) 8a 00 00 00 00 00 00 00 0b 68 00 00 00 08 00 00
[ 1836.824500] blk_update_request: I/O error, dev sdk, sector 2920
[ 1836.824509] sd 9:0:0:0: [sdk] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1836.824512] sd 9:0:0:0: [sdk] tag#16 Sense Key : Illegal Request [current]
[ 1836.824515] sd 9:0:0:0: [sdk] tag#16 Add. Sense: Unaligned write command
[ 1836.824518] sd 9:0:0:0: [sdk] tag#16 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5d 68 00 00 00 08 00 00
[ 1836.824519] blk_update_request: I/O error, dev sdk, sector 5860515176
[ 1836.824528] sd 9:0:0:0: [sdk] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 1836.824531] sd 9:0:0:0: [sdk] tag#17 Sense Key : Illegal Request [current]
[ 1836.824534] sd 9:0:0:0: [sdk] tag#17 Add. Sense: Unaligned write command
[ 1836.824536] sd 9:0:0:0: [sdk] tag#17 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5f 68 00 00 00 08 00 00
[ 1836.824538] blk_update_request: I/O error, dev sdk, sector 5860515688
[ 1836.824545] ata10: EH complete
[ 1844.712111] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1844.712120] ata9.00: failed command: SMART
[ 1844.712128] ata9.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 10
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1844.712132] ata9.00: status: { DRDY }
[ 1844.712139] ata9: hard resetting link
[ 1845.030729] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1845.032403] ata9.00: configured for UDMA/133
[ 1845.032427] ata9: EH complete
[ 1889.768101] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1889.768110] ata9.00: failed command: IDENTIFY DEVICE
[ 1889.768118] ata9.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 11 pio 512 in
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1889.768122] ata9.00: status: { DRDY }
[ 1889.768128] ata9: hard resetting link
[ 1890.082732] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1890.084226] ata9.00: configured for UDMA/133
[ 1890.084255] ata9: EH complete
[ 1907.688079] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1907.688088] ata10.00: failed command: FLUSH CACHE EXT
[ 1907.688096] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 14
                        res 40/00:00:00:00:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
[ 1907.688100] ata10.00: status: { DRDY }
[ 1907.688107] ata10: hard resetting link
[ 1908.006744] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1908.040799] ata10.00: configured for UDMA/133
[ 1908.040804] ata10.00: retrying FLUSH 0xea Emask 0x4
[ 1908.040944] ata10: EH complete
[ 1915.720080] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 1915.720088] ata10.00: failed command: SMART
[ 1915.720096] ata10.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 9
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 1915.720100] ata10.00: status: { DRDY }
[ 1915.720106] ata10: hard resetting link
[ 1916.034901] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1916.036485] ata10.00: configured for UDMA/133
[ 1916.036507] ata10: EH complete
[ 2628.584112] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2628.584121] ata10.00: failed command: FLUSH CACHE EXT
[ 2628.584129] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
                        res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 2628.584133] ata10.00: status: { DRDY }
[ 2628.584140] ata10: hard resetting link
[ 2628.584155] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[ 2628.584162] ata9.00: failed command: FLUSH CACHE EXT
[ 2628.584171] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 12
                        res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
[ 2628.584175] ata9.00: status: { DRDY }
[ 2628.584180] ata9: hard resetting link
[ 2633.936057] ata10: link is slow to respond, please be patient (ready=0)
[ 2633.944051] ata9: link is slow to respond, please be patient (ready=0)
[ 2638.616057] ata10: COMRESET failed (errno=-16)
[ 2638.616065] ata10: hard resetting link
[ 2638.624048] ata9: COMRESET failed (errno=-16)
[ 2638.624055] ata9: hard resetting link
[ 2643.976056] ata9: link is slow to respond, please be patient (ready=0)
[ 2643.988064] ata10: link is slow to respond, please be patient (ready=0)
[ 2648.656058] ata9: COMRESET failed (errno=-16)
[ 2648.656068] ata9: hard resetting link
[ 2648.668055] ata10: COMRESET failed (errno=-16)
[ 2648.668062] ata10: hard resetting link
[ 2649.460062] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2654.008082] ata9: link is slow to respond, please be patient (ready=0)
[ 2654.684071] ata10.00: qc timeout (cmd 0xec)
[ 2654.685155] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 2654.685158] ata10.00: revalidation failed (errno=-5)
[ 2654.685168] ata10: hard resetting link
[ 2660.036056] ata10: link is slow to respond, please be patient (ready=0)
[ 2664.728057] ata10: COMRESET failed (errno=-16)
[ 2664.728066] ata10: hard resetting link
[ 2670.044058] ata10: link is slow to respond, please be patient (ready=0)
[ 2670.388063] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2670.584063] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2670.586973] ata10.00: failed to read native max address (err_mask=0x1)
[ 2670.586976] ata10.00: HPA support seems broken, skipping HPA handling
[ 2670.589377] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.594657] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.594681] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.594685] ata10.00: retrying FLUSH 0xea Emask 0x4
[ 2670.596949] ata10.00: FLUSH failed Emask 0x1
[ 2670.596954] ata10.00: device reported invalid CHS sector 0
[ 2670.598043] ata10: EH complete
[ 2670.609194] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2670.609200] ata10.00: irq_stat 0x40000001
[ 2670.609203] ata10.00: failed command: FLUSH CACHE EXT
[ 2670.609211] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 2
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2670.609215] ata10.00: status: { DRDY ERR }
[ 2670.609218] ata10.00: error: { ABRT }
[ 2670.612227] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.617638] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.617650] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.617654] ata10.00: device reported invalid CHS sector 0
[ 2670.618760] ata10: EH complete
[ 2670.629209] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2670.629214] ata10.00: irq_stat 0x40000001
[ 2670.629218] ata10.00: failed command: FLUSH CACHE EXT
[ 2670.629225] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 5
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2670.629228] ata10.00: status: { DRDY ERR }
[ 2670.629231] ata10.00: error: { ABRT }
[ 2670.632183] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.637469] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.637494] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.637498] ata10.00: device reported invalid CHS sector 0
[ 2670.638573] ata10: EH complete
[ 2670.649212] ata10.00: NCQ disabled due to excessive errors
[ 2670.649217] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2670.649221] ata10.00: irq_stat 0x40000001
[ 2670.649225] ata10.00: failed command: FLUSH CACHE EXT
[ 2670.649232] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 7
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2670.649235] ata10.00: status: { DRDY ERR }
[ 2670.649238] ata10.00: error: { ABRT }
[ 2670.652186] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.657569] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.657580] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.657585] ata10.00: device reported invalid CHS sector 0
[ 2670.658689] ata10: EH complete
[ 2670.669358] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2670.669363] ata10.00: irq_stat 0x40000001
[ 2670.669367] ata10.00: failed command: FLUSH CACHE EXT
[ 2670.669374] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 9
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2670.669378] ata10.00: status: { DRDY ERR }
[ 2670.669380] ata10.00: error: { ABRT }
[ 2670.672324] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.677707] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.677719] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.677723] ata10.00: device reported invalid CHS sector 0
[ 2670.678827] ata10: EH complete
[ 2670.693244] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2670.693249] ata10.00: irq_stat 0x40000001
[ 2670.693253] ata10.00: failed command: FLUSH CACHE EXT
[ 2670.693260] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 21
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2670.693263] ata10.00: status: { DRDY ERR }
[ 2670.693266] ata10.00: error: { ABRT }
[ 2670.696204] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.701574] ata10.00: failed to enable AA (error_mask=0x1)
[ 2670.701586] ata10.00: configured for UDMA/133 (device error ignored)
[ 2670.701590] ata10.00: device reported invalid CHS sector 0
[ 2670.702697] sd 9:0:0:0: [sdk] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2670.702702] sd 9:0:0:0: [sdk] tag#21 Sense Key : Illegal Request [current]
[ 2670.702705] sd 9:0:0:0: [sdk] tag#21 Add. Sense: Unaligned write command
[ 2670.702710] sd 9:0:0:0: [sdk] tag#21 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[ 2670.702716] blk_update_request: I/O error, dev sdk, sector 0
[ 2670.702736] ata10: EH complete
[ 2675.420082] ata9.00: qc timeout (cmd 0xec)
[ 2675.421150] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
[ 2675.421153] ata9.00: revalidation failed (errno=-5)
[ 2675.421161] ata9: hard resetting link
[ 2675.734905] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2675.737843] ata9.00: failed to read native max address (err_mask=0x1)
[ 2675.737845] ata9.00: HPA support seems broken, skipping HPA handling
[ 2675.740229] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.745483] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.745494] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.745497] ata9.00: retrying FLUSH 0xea Emask 0x4
[ 2675.747826] ata9.00: FLUSH failed Emask 0x1
[ 2675.747843] ata9.00: device reported invalid CHS sector 0
[ 2675.748925] ata9: EH complete
[ 2675.761195] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.761201] ata9.00: irq_stat 0x40000001
[ 2675.761204] ata9.00: failed command: FLUSH CACHE EXT
[ 2675.761212] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 14
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.761216] ata9.00: status: { DRDY ERR }
[ 2675.761219] ata9.00: error: { ABRT }
[ 2675.764176] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.769429] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.769453] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.769457] ata9.00: device reported invalid CHS sector 0
[ 2675.770531] ata9: EH complete
[ 2675.781231] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.781236] ata9.00: irq_stat 0x40000001
[ 2675.781240] ata9.00: failed command: FLUSH CACHE EXT
[ 2675.781247] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 18
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.781251] ata9.00: status: { DRDY ERR }
[ 2675.781253] ata9.00: error: { ABRT }
[ 2675.784200] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.789584] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.789596] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.789600] ata9.00: device reported invalid CHS sector 0
[ 2675.790705] ata9: EH complete
[ 2675.801188] ata9.00: NCQ disabled due to excessive errors
[ 2675.801192] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.801197] ata9.00: irq_stat 0x40000001
[ 2675.801200] ata9.00: failed command: FLUSH CACHE EXT
[ 2675.801207] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 20
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.801211] ata9.00: status: { DRDY ERR }
[ 2675.801213] ata9.00: error: { ABRT }
[ 2675.804165] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.809545] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.809557] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.809562] ata9.00: device reported invalid CHS sector 0
[ 2675.810666] ata9: EH complete
[ 2675.821234] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.821240] ata9.00: irq_stat 0x40000001
[ 2675.821243] ata9.00: failed command: FLUSH CACHE EXT
[ 2675.821250] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 1
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.821254] ata9.00: status: { DRDY ERR }
[ 2675.821256] ata9.00: error: { ABRT }
[ 2675.824218] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.829570] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.829582] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.829586] ata9.00: device reported invalid CHS sector 0
[ 2675.830690] ata9: EH complete
[ 2675.841201] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.841219] ata9.00: irq_stat 0x40000001
[ 2675.841222] ata9.00: failed command: FLUSH CACHE EXT
[ 2675.841229] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 3
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.841233] ata9.00: status: { DRDY ERR }
[ 2675.841235] ata9.00: error: { ABRT }
[ 2675.844195] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.849455] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.849480] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.849484] ata9.00: device reported invalid CHS sector 0
[ 2675.850560] sd 8:0:0:0: [sdj] tag#3 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.850577] sd 8:0:0:0: [sdj] tag#3 Sense Key : Illegal Request [current]
[ 2675.850580] sd 8:0:0:0: [sdj] tag#3 Add. Sense: Unaligned write command
[ 2675.850584] sd 8:0:0:0: [sdj] tag#3 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
[ 2675.850590] blk_update_request: I/O error, dev sdj, sector 0
[ 2675.850607] ata9: EH complete
[ 2675.865167] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.865172] ata10.00: irq_stat 0x40000001
[ 2675.865176] ata10.00: failed command: WRITE DMA
[ 2675.865183] ata10.00: cmd ca/00:08:10:09:00/00:00:00:00:00/e0 tag 13 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.865186] ata10.00: status: { DRDY ERR }
[ 2675.865189] ata10.00: error: { ABRT }
[ 2675.868147] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.869142] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.869148] ata9.00: irq_stat 0x40000001
[ 2675.869164] ata9.00: failed command: WRITE DMA
[ 2675.869171] ata9.00: cmd ca/00:08:10:09:00/00:00:00:00:00/e0 tag 17 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.869174] ata9.00: status: { DRDY ERR }
[ 2675.869176] ata9.00: error: { ABRT }
[ 2675.872284] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.874039] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.874064] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.874083] sd 9:0:0:0: [sdk] tag#13 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.874086] sd 9:0:0:0: [sdk] tag#13 Sense Key : Illegal Request [current]
[ 2675.874089] sd 9:0:0:0: [sdk] tag#13 Add. Sense: Unaligned write command
[ 2675.874093] sd 9:0:0:0: [sdk] tag#13 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 10 00 00 00 08 00 00
[ 2675.874095] blk_update_request: I/O error, dev sdk, sector 2320
[ 2675.874112] ata10: EH complete
[ 2675.878319] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.878328] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.879416] sd 8:0:0:0: [sdj] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.879419] sd 8:0:0:0: [sdj] tag#17 Sense Key : Illegal Request [current]
[ 2675.879435] sd 8:0:0:0: [sdj] tag#17 Add. Sense: Unaligned write command
[ 2675.879438] sd 8:0:0:0: [sdj] tag#17 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 10 00 00 00 08 00 00
[ 2675.879440] blk_update_request: I/O error, dev sdj, sector 2320
[ 2675.879451] ata9: EH complete
[ 2675.885150] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.885154] ata10.00: irq_stat 0x40000001
[ 2675.885170] ata10.00: failed command: WRITE DMA
[ 2675.885176] ata10.00: cmd ca/00:08:10:0b:00/00:00:00:00:00/e0 tag 17 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.885179] ata10.00: status: { DRDY ERR }
[ 2675.885181] ata10.00: error: { ABRT }
[ 2675.888088] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.893340] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.893362] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.893382] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.893387] ata9.00: irq_stat 0x40000001
[ 2675.893391] ata9.00: failed command: WRITE DMA
[ 2675.893398] ata9.00: cmd ca/00:08:10:0b:00/00:00:00:00:00/e0 tag 21 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.893402] ata9.00: status: { DRDY ERR }
[ 2675.893404] ata9.00: error: { ABRT }
[ 2675.894440] sd 9:0:0:0: [sdk] tag#17 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.894444] sd 9:0:0:0: [sdk] tag#17 Sense Key : Illegal Request [current]
[ 2675.894460] sd 9:0:0:0: [sdk] tag#17 Add. Sense: Unaligned write command
[ 2675.894464] sd 9:0:0:0: [sdk] tag#17 CDB: Write(16) 8a 00 00 00 00 00 00 00 0b 10 00 00 00 08 00 00
[ 2675.894466] blk_update_request: I/O error, dev sdk, sector 2832
[ 2675.894478] ata10: EH complete
[ 2675.896356] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.901778] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.901803] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.902913] sd 8:0:0:0: [sdj] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.902917] sd 8:0:0:0: [sdj] tag#21 Sense Key : Illegal Request [current]
[ 2675.902921] sd 8:0:0:0: [sdj] tag#21 Add. Sense: Unaligned write command
[ 2675.902925] sd 8:0:0:0: [sdj] tag#21 CDB: Write(16) 8a 00 00 00 00 00 00 00 0b 10 00 00 00 08 00 00
[ 2675.902927] blk_update_request: I/O error, dev sdj, sector 2832
[ 2675.902946] ata9: EH complete
[ 2675.909151] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.909155] ata10.00: irq_stat 0x40000001
[ 2675.909159] ata10.00: failed command: WRITE DMA EXT
[ 2675.909178] ata10.00: cmd 35/00:08:10:5d:50/00:00:5d:01:00/e0 tag 23 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.909181] ata10.00: status: { DRDY ERR }
[ 2675.909184] ata10.00: error: { ABRT }
[ 2675.912088] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.917171] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.917177] ata9.00: irq_stat 0x40000001
[ 2675.917182] ata9.00: failed command: WRITE DMA EXT
[ 2675.917202] ata9.00: cmd 35/00:08:10:5d:50/00:00:5d:01:00/e0 tag 25 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.917205] ata9.00: status: { DRDY ERR }
[ 2675.917207] ata9.00: error: { ABRT }
[ 2675.917324] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.917331] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.918409] sd 9:0:0:0: [sdk] tag#23 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.918413] sd 9:0:0:0: [sdk] tag#23 Sense Key : Illegal Request [current]
[ 2675.918429] sd 9:0:0:0: [sdk] tag#23 Add. Sense: Unaligned write command
[ 2675.918432] sd 9:0:0:0: [sdk] tag#23 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5d 10 00 00 00 08 00 00
[ 2675.918435] blk_update_request: I/O error, dev sdk, sector 5860515088
[ 2675.918449] ata10: EH complete
[ 2675.920068] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.925429] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.925454] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.926535] sd 8:0:0:0: [sdj] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.926552] sd 8:0:0:0: [sdj] tag#25 Sense Key : Illegal Request [current]
[ 2675.926555] sd 8:0:0:0: [sdj] tag#25 Add. Sense: Unaligned write command
[ 2675.926559] sd 8:0:0:0: [sdj] tag#25 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5d 10 00 00 00 08 00 00
[ 2675.926561] blk_update_request: I/O error, dev sdj, sector 5860515088
[ 2675.926577] ata9: EH complete
[ 2675.933235] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.933242] ata10.00: irq_stat 0x40000001
[ 2675.933247] ata10.00: failed command: WRITE DMA EXT
[ 2675.933255] ata10.00: cmd 35/00:08:10:5f:50/00:00:5d:01:00/e0 tag 28 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.933259] ata10.00: status: { DRDY ERR }
[ 2675.933262] ata10.00: error: { ABRT }
[ 2675.936126] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.937132] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.937148] ata9.00: irq_stat 0x40000001
[ 2675.937152] ata9.00: failed command: WRITE DMA EXT
[ 2675.937159] ata9.00: cmd 35/00:08:10:5f:50/00:00:5d:01:00/e0 tag 30 dma 4096 out
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.937162] ata9.00: status: { DRDY ERR }
[ 2675.937164] ata9.00: error: { ABRT }
[ 2675.940259] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.941972] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.941981] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.942011] sd 9:0:0:0: [sdk] tag#28 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.942014] sd 9:0:0:0: [sdk] tag#28 Sense Key : Illegal Request [current]
[ 2675.942017] sd 9:0:0:0: [sdk] tag#28 Add. Sense: Unaligned write command
[ 2675.942021] sd 9:0:0:0: [sdk] tag#28 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5f 10 00 00 00 08 00 00
[ 2675.942023] blk_update_request: I/O error, dev sdk, sector 5860515600
[ 2675.942036] ata10: EH complete
[ 2675.946272] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.946298] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.947378] sd 8:0:0:0: [sdj] tag#30 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2675.947395] sd 8:0:0:0: [sdj] tag#30 Sense Key : Illegal Request [current]
[ 2675.947398] sd 8:0:0:0: [sdj] tag#30 Add. Sense: Unaligned write command
[ 2675.947401] sd 8:0:0:0: [sdj] tag#30 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5f 10 00 00 00 08 00 00
[ 2675.947403] blk_update_request: I/O error, dev sdj, sector 5860515600
[ 2675.947418] ata9: EH complete
[ 2675.953133] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.953137] ata10.00: irq_stat 0x40000001
[ 2675.953140] ata10.00: failed command: READ DMA
[ 2675.953147] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 2 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.953150] ata10.00: status: { DRDY ERR }
[ 2675.953153] ata10.00: error: { ABRT }
[ 2675.956104] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.961214] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.961220] ata9.00: irq_stat 0x40000001
[ 2675.961224] ata9.00: failed command: READ DMA
[ 2675.961231] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.961234] ata9.00: status: { DRDY ERR }
[ 2675.961236] ata9.00: error: { ABRT }
[ 2675.961408] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.961433] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.962511] ata10: EH complete
[ 2675.964079] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.969421] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.969430] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.970515] ata9: EH complete
[ 2675.977186] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.977192] ata10.00: irq_stat 0x40000001
[ 2675.977195] ata10.00: failed command: READ DMA
[ 2675.977202] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 6 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.977206] ata10.00: status: { DRDY ERR }
[ 2675.977208] ata10.00: error: { ABRT }
[ 2675.980041] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.981148] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.981151] ata9.00: irq_stat 0x40000001
[ 2675.981155] ata9.00: failed command: READ DMA
[ 2675.981162] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 11 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.981165] ata9.00: status: { DRDY ERR }
[ 2675.981168] ata9.00: error: { ABRT }
[ 2675.984139] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.985950] ata10.00: failed to enable AA (error_mask=0x1)
[ 2675.985975] ata10.00: configured for UDMA/133 (device error ignored)
[ 2675.985991] ata10: EH complete
[ 2675.990206] ata9.00: failed to enable AA (error_mask=0x1)
[ 2675.990231] ata9.00: configured for UDMA/133 (device error ignored)
[ 2675.991308] ata9: EH complete
[ 2675.997230] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2675.997248] ata10.00: irq_stat 0x40000001
[ 2675.997252] ata10.00: failed command: READ DMA
[ 2675.997259] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2675.997262] ata10.00: status: { DRDY ERR }
[ 2675.997265] ata10.00: error: { ABRT }
[ 2676.000116] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.005155] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.005159] ata9.00: irq_stat 0x40000001
[ 2676.005162] ata9.00: failed command: READ DMA
[ 2676.005183] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 17 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.005186] ata9.00: status: { DRDY ERR }
[ 2676.005188] ata9.00: error: { ABRT }
[ 2676.005315] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.005321] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.006395] ata10: EH complete
[ 2676.008079] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.013503] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.013516] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.014596] ata9: EH complete
[ 2676.021206] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.021224] ata10.00: irq_stat 0x40000001
[ 2676.021229] ata10.00: failed command: READ DMA
[ 2676.021236] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 14 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.021239] ata10.00: status: { DRDY ERR }
[ 2676.021242] ata10.00: error: { ABRT }
[ 2676.024102] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.025205] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.025212] ata9.00: irq_stat 0x40000001
[ 2676.025216] ata9.00: failed command: READ DMA
[ 2676.025225] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 21 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.025229] ata9.00: status: { DRDY ERR }
[ 2676.025231] ata9.00: error: { ABRT }
[ 2676.028288] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.030007] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.030015] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.030042] ata10: EH complete
[ 2676.034497] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.034510] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.035621] ata9: EH complete
[ 2676.041187] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.041193] ata10.00: irq_stat 0x40000001
[ 2676.041196] ata10.00: failed command: READ DMA
[ 2676.041203] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 18 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.041207] ata10.00: status: { DRDY ERR }
[ 2676.041209] ata10.00: error: { ABRT }
[ 2676.044205] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.049160] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.049167] ata9.00: irq_stat 0x40000001
[ 2676.049172] ata9.00: failed command: READ DMA
[ 2676.049180] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.049184] ata9.00: status: { DRDY ERR }
[ 2676.049186] ata9.00: error: { ABRT }
[ 2676.049686] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.049697] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.050806] ata10: EH complete
[ 2676.052144] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.057570] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.057594] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.058674] ata9: EH complete
[ 2676.065162] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.065168] ata10.00: irq_stat 0x40000001
[ 2676.065172] ata10.00: failed command: READ DMA
[ 2676.065179] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 24 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.065182] ata10.00: status: { DRDY ERR }
[ 2676.065184] ata10.00: error: { ABRT }
[ 2676.068176] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.069213] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.069219] ata9.00: irq_stat 0x40000001
[ 2676.069224] ata9.00: failed command: READ DMA
[ 2676.069232] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 0 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.069236] ata9.00: status: { DRDY ERR }
[ 2676.069238] ata9.00: error: { ABRT }
[ 2676.072360] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.074255] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.074266] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.074286] sd 9:0:0:0: [sdk] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[ 2676.074289] sd 9:0:0:0: [sdk] tag#24 Sense Key : Illegal Request [current]
[ 2676.074292] sd 9:0:0:0: [sdk] tag#24 Add. Sense: Unaligned write command
[ 2676.074296] sd 9:0:0:0: [sdk] tag#24 CDB: Read(16) 88 00 00 00 00 00 00 00 0a 10 00 00 00 10 00 00
[ 2676.074298] blk_update_request: I/O error, dev sdk, sector 2576
[ 2676.074315] ata10: EH complete
[ 2676.078482] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.078496] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.079620] ata9: EH complete
[ 2676.085193] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.085198] ata10.00: irq_stat 0x40000001
[ 2676.085202] ata10.00: failed command: READ DMA EXT
[ 2676.085208] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 30 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.085212] ata10.00: status: { DRDY ERR }
[ 2676.085214] ata10.00: error: { ABRT }
[ 2676.088181] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.093166] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.093183] ata9.00: irq_stat 0x40000001
[ 2676.093187] ata9.00: failed command: READ DMA EXT
[ 2676.093194] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 7 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.093198] ata9.00: status: { DRDY ERR }
[ 2676.093200] ata9.00: error: { ABRT }
[ 2676.093387] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.093395] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.094485] ata10: EH complete
[ 2676.096111] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.101432] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.101444] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.102526] ata9: EH complete
[ 2676.113114] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.113133] ata10.00: irq_stat 0x40000001
[ 2676.113137] ata10.00: failed command: READ DMA EXT
[ 2676.113144] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 2 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.113148] ata10.00: status: { DRDY ERR }
[ 2676.113150] ata10.00: error: { ABRT }
[ 2676.113166] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.113169] ata9.00: irq_stat 0x40000001
[ 2676.113173] ata9.00: failed command: READ DMA EXT
[ 2676.113180] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 9 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.113183] ata9.00: status: { DRDY ERR }
[ 2676.113199] ata9.00: error: { ABRT }
[ 2676.117165] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.117250] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.124679] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.124687] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.124751] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.124775] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.125776] ata9: EH complete
[ 2676.125873] ata10: EH complete
[ 2676.141139] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.141144] ata10.00: irq_stat 0x40000001
[ 2676.141147] ata10.00: failed command: READ DMA EXT
[ 2676.141154] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.141157] ata10.00: status: { DRDY ERR }
[ 2676.141159] ata10.00: error: { ABRT }
[ 2676.141178] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.141185] ata9.00: irq_stat 0x40000001
[ 2676.141190] ata9.00: failed command: READ DMA EXT
[ 2676.141200] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 13 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.141218] ata9.00: status: { DRDY ERR }
[ 2676.141222] ata9.00: error: { ABRT }
[ 2676.145214] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.145245] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.152634] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.152644] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.152668] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.152677] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.153732] ata9: EH complete
[ 2676.153765] ata10: EH complete
[ 2676.169171] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.169188] ata10.00: irq_stat 0x40000001
[ 2676.169192] ata10.00: failed command: READ DMA EXT
[ 2676.169198] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 12 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.169201] ata10.00: status: { DRDY ERR }
[ 2676.169203] ata10.00: error: { ABRT }
[ 2676.169287] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.169293] ata9.00: irq_stat 0x40000001
[ 2676.169298] ata9.00: failed command: READ DMA EXT
[ 2676.169306] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 19 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.169310] ata9.00: status: { DRDY ERR }
[ 2676.169326] ata9.00: error: { ABRT }
[ 2676.173258] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.173300] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.180792] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.180801] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.180834] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.180845] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.181890] ata10: EH complete
[ 2676.181930] ata9: EH complete
[ 2676.197163] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.197181] ata9.00: irq_stat 0x40000001
[ 2676.197185] ata9.00: failed command: READ DMA EXT
[ 2676.197192] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 23 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.197196] ata9.00: status: { DRDY ERR }
[ 2676.197198] ata9.00: error: { ABRT }
[ 2676.197215] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.197220] ata10.00: irq_stat 0x40000001
[ 2676.197224] ata10.00: failed command: READ DMA EXT
[ 2676.197244] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 16 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.197248] ata10.00: status: { DRDY ERR }
[ 2676.197251] ata10.00: error: { ABRT }
[ 2676.201301] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.201350] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.208826] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.208839] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.208880] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.208892] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.209918] ata9: EH complete
[ 2676.209991] ata10: EH complete
[ 2676.225210] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.225216] ata9.00: irq_stat 0x40000001
[ 2676.225220] ata9.00: failed command: READ DMA EXT
[ 2676.225227] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.225231] ata9.00: status: { DRDY ERR }
[ 2676.225233] ata9.00: error: { ABRT }
[ 2676.225250] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.225256] ata10.00: irq_stat 0x40000001
[ 2676.225259] ata10.00: failed command: READ DMA EXT
[ 2676.225266] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 20 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.225270] ata10.00: status: { DRDY ERR }
[ 2676.225272] ata10.00: error: { ABRT }
[ 2676.229301] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.229353] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.236843] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.236856] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.236901] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.236912] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.237964] ata9: EH complete
[ 2676.238041] ata10: EH complete
[ 2676.253155] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.253173] ata9.00: irq_stat 0x40000001
[ 2676.253176] ata9.00: failed command: READ DMA EXT
[ 2676.253182] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 2 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.253185] ata9.00: status: { DRDY ERR }
[ 2676.253187] ata9.00: error: { ABRT }
[ 2676.253206] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.253210] ata10.00: irq_stat 0x40000001
[ 2676.253214] ata10.00: failed command: READ DMA EXT
[ 2676.253220] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 26 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.253223] ata10.00: status: { DRDY ERR }
[ 2676.253225] ata10.00: error: { ABRT }
[ 2676.257254] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.257306] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.264747] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.264758] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.264786] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.264796] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.265846] ata9: EH complete
[ 2676.265900] ata10: EH complete
[ 2676.285157] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.285163] ata9.00: irq_stat 0x40000001
[ 2676.285179] ata9.00: failed command: READ DMA EXT
[ 2676.285185] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 10 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.285188] ata9.00: status: { DRDY ERR }
[ 2676.285190] ata9.00: error: { ABRT }
[ 2676.285206] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.285211] ata10.00: irq_stat 0x40000001
[ 2676.285214] ata10.00: failed command: READ DMA EXT
[ 2676.285220] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 29 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.285223] ata10.00: status: { DRDY ERR }
[ 2676.285225] ata10.00: error: { ABRT }
[ 2676.289327] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.289376] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.296922] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.296948] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.297056] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.297068] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.298025] ata9: EH complete
[ 2676.298175] ata10: EH complete
[ 2676.309215] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.309220] ata9.00: irq_stat 0x40000001
[ 2676.309224] ata9.00: failed command: READ DMA EXT
[ 2676.309231] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 13 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.309234] ata9.00: status: { DRDY ERR }
[ 2676.309237] ata9.00: error: { ABRT }
[ 2676.312169] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.313162] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.313180] ata10.00: irq_stat 0x40000001
[ 2676.313184] ata10.00: failed command: READ DMA EXT
[ 2676.313192] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 1 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.313195] ata10.00: status: { DRDY ERR }
[ 2676.313198] ata10.00: error: { ABRT }
[ 2676.316380] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.318205] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.318216] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.318233] ata9: EH complete
[ 2676.322367] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.322391] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.323487] ata10: EH complete
[ 2676.333203] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.333208] ata9.00: irq_stat 0x40000001
[ 2676.333212] ata9.00: failed command: READ DMA EXT
[ 2676.333219] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 25 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.333223] ata9.00: status: { DRDY ERR }
[ 2676.333225] ata9.00: error: { ABRT }
[ 2676.336162] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.341194] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.341199] ata10.00: irq_stat 0x40000001
[ 2676.341203] ata10.00: failed command: READ DMA EXT
[ 2676.341209] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 13 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.341212] ata10.00: status: { DRDY ERR }
[ 2676.341215] ata10.00: error: { ABRT }
[ 2676.341365] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.341375] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.342461] ata9: EH complete
[ 2676.344080] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.349322] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.349330] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.350414] ata10: EH complete
[ 2676.357179] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.357184] ata9.00: irq_stat 0x40000001
[ 2676.357188] ata9.00: failed command: READ DMA EXT
[ 2676.357195] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.357198] ata9.00: status: { DRDY ERR }
[ 2676.357200] ata9.00: error: { ABRT }
[ 2676.360038] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.361133] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.361136] ata10.00: irq_stat 0x40000001
[ 2676.361140] ata10.00: failed command: READ DMA EXT
[ 2676.361160] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 16 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.361164] ata10.00: status: { DRDY ERR }
[ 2676.361166] ata10.00: error: { ABRT }
[ 2676.364116] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.365867] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.365874] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.365899] ata9: EH complete
[ 2676.370062] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.370070] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.371153] ata10: EH complete
[ 2676.377167] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.377173] ata9.00: irq_stat 0x40000001
[ 2676.377178] ata9.00: failed command: READ DMA EXT
[ 2676.377187] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.377191] ata9.00: status: { DRDY ERR }
[ 2676.377193] ata9.00: error: { ABRT }
[ 2676.380023] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.385168] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.385171] ata10.00: irq_stat 0x40000001
[ 2676.385175] ata10.00: failed command: READ DMA EXT
[ 2676.385183] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 28 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.385186] ata10.00: status: { DRDY ERR }
[ 2676.385189] ata10.00: error: { ABRT }
[ 2676.385205] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.385219] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.386344] ata9: EH complete
[ 2676.388045] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.393249] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.393258] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.394380] ata10: EH complete
[ 2676.409153] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.409158] ata9.00: irq_stat 0x40000001
[ 2676.409162] ata9.00: failed command: READ DMA
[ 2676.409169] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 13 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.409173] ata9.00: status: { DRDY ERR }
[ 2676.409175] ata9.00: error: { ABRT }
[ 2676.412049] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.417270] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.417281] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.418373] ata9: EH complete
[ 2676.429121] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.429126] ata9.00: irq_stat 0x40000001
[ 2676.429130] ata9.00: failed command: READ DMA
[ 2676.429136] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 15 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.429139] ata9.00: status: { DRDY ERR }
[ 2676.429141] ata9.00: error: { ABRT }
[ 2676.431980] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.437174] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.437183] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.438274] ata9: EH complete
[ 2676.449190] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.449196] ata9.00: irq_stat 0x40000001
[ 2676.449200] ata9.00: failed command: READ DMA
[ 2676.449208] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 19 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.449212] ata9.00: status: { DRDY ERR }
[ 2676.449214] ata9.00: error: { ABRT }
[ 2676.452028] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.457198] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.457206] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.458293] ata9: EH complete
[ 2676.469152] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.469157] ata9.00: irq_stat 0x40000001
[ 2676.469161] ata9.00: failed command: READ DMA
[ 2676.469167] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 23 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.469170] ata9.00: status: { DRDY ERR }
[ 2676.469172] ata9.00: error: { ABRT }
[ 2676.472028] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.477208] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.477215] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.478300] ata9: EH complete
[ 2676.489168] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.489174] ata9.00: irq_stat 0x40000001
[ 2676.489178] ata9.00: failed command: READ DMA
[ 2676.489186] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.489189] ata9.00: status: { DRDY ERR }
[ 2676.489192] ata9.00: error: { ABRT }
[ 2676.492050] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.497213] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.497220] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.498291] ata9: EH complete
[ 2676.509186] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.509192] ata9.00: irq_stat 0x40000001
[ 2676.509195] ata9.00: failed command: READ DMA
[ 2676.509203] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 0 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.509206] ata9.00: status: { DRDY ERR }
[ 2676.509209] ata9.00: error: { ABRT }
[ 2676.512066] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.517354] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.517379] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.518484] ata9: EH complete
[ 2676.529220] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.529226] ata9.00: irq_stat 0x40000001
[ 2676.529230] ata9.00: failed command: READ DMA EXT
[ 2676.529238] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 6 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.529242] ata9.00: status: { DRDY ERR }
[ 2676.529244] ata9.00: error: { ABRT }
[ 2676.532115] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.537343] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.537368] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.538460] ata9: EH complete
[ 2676.549182] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.549190] ata9.00: irq_stat 0x40000001
[ 2676.549196] ata9.00: failed command: READ DMA EXT
[ 2676.549208] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 9 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.549214] ata9.00: status: { DRDY ERR }
[ 2676.549218] ata9.00: error: { ABRT }
[ 2676.552084] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.557396] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.557426] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.558523] ata9: EH complete
[ 2676.569184] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.569189] ata9.00: irq_stat 0x40000001
[ 2676.569193] ata9.00: failed command: READ DMA EXT
[ 2676.569200] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 15 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.569203] ata9.00: status: { DRDY ERR }
[ 2676.569206] ata9.00: error: { ABRT }
[ 2676.572076] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.577328] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.577351] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.578428] ata9: EH complete
[ 2676.589190] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.589196] ata9.00: irq_stat 0x40000001
[ 2676.589200] ata9.00: failed command: READ DMA EXT
[ 2676.589208] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 19 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.589212] ata9.00: status: { DRDY ERR }
[ 2676.589214] ata9.00: error: { ABRT }
[ 2676.592080] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.597330] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.597342] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.598432] ata9: EH complete
[ 2676.609219] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.609224] ata9.00: irq_stat 0x40000001
[ 2676.609228] ata9.00: failed command: READ DMA EXT
[ 2676.609235] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 23 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.609239] ata9.00: status: { DRDY ERR }
[ 2676.609241] ata9.00: error: { ABRT }
[ 2676.612106] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.617335] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.617360] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.618438] ata9: EH complete
[ 2676.629177] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.629182] ata9.00: irq_stat 0x40000001
[ 2676.629187] ata9.00: failed command: READ DMA EXT
[ 2676.629195] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 27 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.629198] ata9.00: status: { DRDY ERR }
[ 2676.629200] ata9.00: error: { ABRT }
[ 2676.632143] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.637437] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.637462] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.638568] ata9: EH complete
[ 2676.649154] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.649160] ata9.00: irq_stat 0x40000001
[ 2676.649163] ata9.00: failed command: READ DMA EXT
[ 2676.649170] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 1 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.649173] ata9.00: status: { DRDY ERR }
[ 2676.649176] ata9.00: error: { ABRT }
[ 2676.652103] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.657394] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.657405] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.658480] ata9: EH complete
[ 2676.669188] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.669193] ata9.00: irq_stat 0x40000001
[ 2676.669196] ata9.00: failed command: READ DMA EXT
[ 2676.669203] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 3 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.669206] ata9.00: status: { DRDY ERR }
[ 2676.669208] ata9.00: error: { ABRT }
[ 2676.672152] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.677456] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.677481] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.678571] ata9: EH complete
[ 2676.689166] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.689172] ata9.00: irq_stat 0x40000001
[ 2676.689176] ata9.00: failed command: READ DMA EXT
[ 2676.689185] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 5 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.689188] ata9.00: status: { DRDY ERR }
[ 2676.689191] ata9.00: error: { ABRT }
[ 2676.692064] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.697292] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.697303] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.698382] ata9: EH complete
[ 2676.709165] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.709171] ata9.00: irq_stat 0x40000001
[ 2676.709187] ata9.00: failed command: READ DMA EXT
[ 2676.709194] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 7 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.709197] ata9.00: status: { DRDY ERR }
[ 2676.709199] ata9.00: error: { ABRT }
[ 2676.712144] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.717455] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.717480] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.718557] ata9: EH complete
[ 2676.729202] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.729207] ata9.00: irq_stat 0x40000001
[ 2676.729211] ata9.00: failed command: READ DMA EXT
[ 2676.729217] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 19 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.729220] ata9.00: status: { DRDY ERR }
[ 2676.729222] ata9.00: error: { ABRT }
[ 2676.732170] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.737464] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.737489] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.738581] ata9: EH complete
[ 2676.749208] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.749213] ata9.00: irq_stat 0x40000001
[ 2676.749217] ata9.00: failed command: READ DMA EXT
[ 2676.749224] ata9.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 21 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.749227] ata9.00: status: { DRDY ERR }
[ 2676.749229] ata9.00: error: { ABRT }
[ 2676.752188] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.757478] ata9.00: failed to enable AA (error_mask=0x1)
[ 2676.757503] ata9.00: configured for UDMA/133 (device error ignored)
[ 2676.758608] ata9: EH complete
[ 2676.773149] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.773154] ata10.00: irq_stat 0x40000001
[ 2676.773158] ata10.00: failed command: READ DMA
[ 2676.773165] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 23 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.773168] ata10.00: status: { DRDY ERR }
[ 2676.773171] ata10.00: error: { ABRT }
[ 2676.776168] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.781409] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.781421] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.782529] ata10: EH complete
[ 2676.797175] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.797180] ata10.00: irq_stat 0x40000001
[ 2676.797184] ata10.00: failed command: READ DMA
[ 2676.797190] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 25 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.797193] ata10.00: status: { DRDY ERR }
[ 2676.797195] ata10.00: error: { ABRT }
[ 2676.800147] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.805537] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.805548] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.806656] ata10: EH complete
[ 2676.817192] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.817198] ata10.00: irq_stat 0x40000001
[ 2676.817202] ata10.00: failed command: READ DMA
[ 2676.817209] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 29 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.817212] ata10.00: status: { DRDY ERR }
[ 2676.817214] ata10.00: error: { ABRT }
[ 2676.820174] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.825546] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.825557] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.826663] ata10: EH complete
[ 2676.837180] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.837185] ata10.00: irq_stat 0x40000001
[ 2676.837188] ata10.00: failed command: READ DMA
[ 2676.837195] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 2 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.837198] ata10.00: status: { DRDY ERR }
[ 2676.837200] ata10.00: error: { ABRT }
[ 2676.840157] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.845532] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.845543] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.846649] ata10: EH complete
[ 2676.857196] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.857202] ata10.00: irq_stat 0x40000001
[ 2676.857205] ata10.00: failed command: READ DMA
[ 2676.857212] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 4 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.857215] ata10.00: status: { DRDY ERR }
[ 2676.857218] ata10.00: error: { ABRT }
[ 2676.860182] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.865579] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.865591] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.866700] ata10: EH complete
[ 2676.877193] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.877210] ata10.00: irq_stat 0x40000001
[ 2676.877214] ata10.00: failed command: READ DMA
[ 2676.877220] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.877223] ata10.00: status: { DRDY ERR }
[ 2676.877225] ata10.00: error: { ABRT }
[ 2676.880188] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.885569] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.885580] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.886699] ata10: EH complete
[ 2676.897194] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.897199] ata10.00: irq_stat 0x40000001
[ 2676.897203] ata10.00: failed command: READ DMA EXT
[ 2676.897210] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 12 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.897213] ata10.00: status: { DRDY ERR }
[ 2676.897216] ata10.00: error: { ABRT }
[ 2676.900192] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.905621] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.905645] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.906723] ata10: EH complete
[ 2676.917163] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.917170] ata10.00: irq_stat 0x40000001
[ 2676.917177] ata10.00: failed command: READ DMA EXT
[ 2676.917187] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 15 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.917193] ata10.00: status: { DRDY ERR }
[ 2676.917196] ata10.00: error: { ABRT }
[ 2676.920202] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.925611] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.925621] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.926697] ata10: EH complete
[ 2676.937180] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.937185] ata10.00: irq_stat 0x40000001
[ 2676.937189] ata10.00: failed command: READ DMA EXT
[ 2676.937195] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 21 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.937198] ata10.00: status: { DRDY ERR }
[ 2676.937200] ata10.00: error: { ABRT }
[ 2676.940134] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.945514] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.945538] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.946615] ata10: EH complete
[ 2676.957225] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.957230] ata10.00: irq_stat 0x40000001
[ 2676.957233] ata10.00: failed command: READ DMA EXT
[ 2676.957239] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 25 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.957242] ata10.00: status: { DRDY ERR }
[ 2676.957244] ata10.00: error: { ABRT }
[ 2676.960213] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.965612] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.965624] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.966733] ata10: EH complete
[ 2676.977184] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.977189] ata10.00: irq_stat 0x40000001
[ 2676.977193] ata10.00: failed command: READ DMA EXT
[ 2676.977200] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 29 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.977204] ata10.00: status: { DRDY ERR }
[ 2676.977206] ata10.00: error: { ABRT }
[ 2676.980209] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.985612] ata10.00: failed to enable AA (error_mask=0x1)
[ 2676.985623] ata10.00: configured for UDMA/133 (device error ignored)
[ 2676.986729] ata10: EH complete
[ 2676.997172] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2676.997177] ata10.00: irq_stat 0x40000001
[ 2676.997181] ata10.00: failed command: READ DMA EXT
[ 2676.997188] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 2 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2676.997191] ata10.00: status: { DRDY ERR }
[ 2676.997193] ata10.00: error: { ABRT }
[ 2677.000203] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.005609] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.005620] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.006739] ata10: EH complete
[ 2677.017203] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.017208] ata10.00: irq_stat 0x40000001
[ 2677.017212] ata10.00: failed command: READ DMA EXT
[ 2677.017219] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 8 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.017222] ata10.00: status: { DRDY ERR }
[ 2677.017224] ata10.00: error: { ABRT }
[ 2677.020145] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.025364] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.025388] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.026491] ata10: EH complete
[ 2677.037161] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.037166] ata10.00: irq_stat 0x40000001
[ 2677.037170] ata10.00: failed command: READ DMA EXT
[ 2677.037177] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 14 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.037180] ata10.00: status: { DRDY ERR }
[ 2677.037182] ata10.00: error: { ABRT }
[ 2677.040088] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.045279] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.045301] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.046381] ata10: EH complete
[ 2677.057176] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.057182] ata10.00: irq_stat 0x40000001
[ 2677.057186] ata10.00: failed command: READ DMA EXT
[ 2677.057194] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 16 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.057198] ata10.00: status: { DRDY ERR }
[ 2677.057200] ata10.00: error: { ABRT }
[ 2677.060145] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.065449] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.065461] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.066550] ata10: EH complete
[ 2677.077129] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.077145] ata10.00: irq_stat 0x40000001
[ 2677.077149] ata10.00: failed command: READ DMA EXT
[ 2677.077157] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 28 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.077160] ata10.00: status: { DRDY ERR }
[ 2677.077163] ata10.00: error: { ABRT }
[ 2677.079994] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.085288] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.085300] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.086408] ata10: EH complete
[ 2677.097171] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.097176] ata10.00: irq_stat 0x40000001
[ 2677.097181] ata10.00: failed command: READ DMA EXT
[ 2677.097188] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 30 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.097192] ata10.00: status: { DRDY ERR }
[ 2677.097194] ata10.00: error: { ABRT }
[ 2677.100172] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.105558] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.105570] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.106679] ata10: EH complete
[ 2677.117245] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
[ 2677.117251] ata10.00: irq_stat 0x40000001
[ 2677.117255] ata10.00: failed command: READ DMA EXT
[ 2677.117262] ata10.00: cmd 25/00:10:10:5e:50/00:00:5d:01:00/e0 tag 1 dma 8192 in
                        res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
[ 2677.117266] ata10.00: status: { DRDY ERR }
[ 2677.117268] ata10.00: error: { ABRT }
[ 2677.120228] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.125622] ata10.00: failed to enable AA (error_mask=0x1)
[ 2677.125633] ata10.00: configured for UDMA/133 (device error ignored)
[ 2677.126754] ata10: EH complete
    smart sdj 
    smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   196   180   021    Pre-fail  Always       -       5158
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       204
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   065   065   000    Old_age   Always       -       25722
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       164
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       144
193 Load_Cycle_Count        0x0032   191   191   000    Old_age   Always       -       28547
194 Temperature_Celsius     0x0022   118   109   000    Old_age   Always       -       32
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
    sdk 
    smartctl 6.5 2016-01-24 r4214 [x86_64-linux-4.8.0-53-generic] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       0
  3 Spin_Up_Time            0x0027   176   176   021    Pre-fail  Always       -       6175
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       203
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x002e   100   253   000    Old_age   Always       -       0
  9 Power_On_Hours          0x0032   065   065   000    Old_age   Always       -       25728
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       164
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       144
193 Load_Cycle_Count        0x0032   191   191   000    Old_age   Always       -       28542
194 Temperature_Celsius     0x0022   118   109   000    Old_age   Always       -       32
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       1
200 Multi_Zone_Error_Rate   0x0008   200   200   000    Old_age   Offline      -       0
    vypadaji uplne ok. ale hlasi v logu SMARTU nejake ATA chyby (sdj i k) 
    SMART Error Log Version: 1
ATA Error Count: 152 (device log contains only the most recent five errors)
        CR = Command Register [HEX]
        FR = Features Register [HEX]
        SC = Sector Count Register [HEX]
        SN = Sector Number Register [HEX]
        CL = Cylinder Low Register [HEX]
        CH = Cylinder High Register [HEX]
        DH = Device/Head Register [HEX]
        DC = Device Command Register [HEX]
        ER = Error register [HEX]
        ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 152 occurred at disk power-on lifetime: 25727 hours (1071 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 00      01:14:04.188  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.187  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:14:04.185  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      01:14:04.182  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.182  IDENTIFY DEVICE

Error 151 occurred at disk power-on lifetime: 25727 hours (1071 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 00      01:14:04.185  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      01:14:04.182  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.182  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 00      01:14:04.168  SET FEATURES [Enable SATA feature]

Error 150 occurred at disk power-on lifetime: 25727 hours (1071 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 00      01:14:04.182  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.182  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 00      01:14:04.168  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.167  IDENTIFY DEVICE

Error 149 occurred at disk power-on lifetime: 25727 hours (1071 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 02 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 10 02 00 00 00 a0 00      01:14:04.168  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.167  IDENTIFY DEVICE
  ef 03 46 00 00 00 a0 00      01:14:04.165  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      01:14:04.162  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.162  IDENTIFY DEVICE

Error 148 occurred at disk power-on lifetime: 25727 hours (1071 days + 23 hours)
  When the command that caused the error occurred, the device was active or idle.

  After command completion occurred, registers were:
  ER ST SC SN CL CH DH
  -- -- -- -- -- -- --
  04 61 46 00 00 00 a0  Device Fault; Error: ABRT

  Commands leading to the command that caused the error were:
  CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  -- -- -- -- -- -- -- --  ----------------  --------------------
  ef 03 46 00 00 00 a0 00      01:14:04.165  SET FEATURES [Set transfer mode]
  ef 10 02 00 00 00 a0 00      01:14:04.162  SET FEATURES [Enable SATA feature]
  ec 00 00 00 00 00 a0 00      01:14:04.162  IDENTIFY DEVICE
  ef 10 02 00 00 00 a0 00      01:14:04.148  SET FEATURES [Enable SATA feature]

SMART Self-test log structure revision number 1
Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
# 1  Extended offline    Completed without error       00%     22789         -
# 2  Short offline       Completed without error       00%         0         -

SMART Selective self-test log data structure revision number 1
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
    1        0        0  Not_testing
    2        0        0  Not_testing
    3        0        0  Not_testing
    4        0        0  Not_testing
    5        0        0  Not_testing
Selective self-test flags (0x0):
  After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
    Predpokladam, ze chcipnul radic?

    V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

    Vaše jméno
    Váš email
    Typ požadavku
    Slovní popis
    Píšeme jinde
    ISSN 1214-1267   www.czech-server.cz
    Redakce | Inzerce | Podmínky použití | Osobní údaje
    © 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.