abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
×
    dnes 12:44 | Upozornění

    Část údajů uživatelů internetového supermarketu Rohlík byla odcizena. Kyberútočníci napadli nástroj zákaznické podpory Rohlíku, odcizili tak jména, e-mailové adresy, v některých případech také telefonní čísla nebo přepisy komunikace mezi klienty a zákaznickou podporou. Rohlík incident nahlásil příslušným orgánům a přijal příslušné opatření, aby zamezil podobným případům v budoucnosti, uvedla firma.

    Ladislav Hagara | Komentářů: 3
    dnes 11:11 | IT novinky

    Aplikace eDoklady fungovala v obou volebních dnech stabilně a prakticky bez front. Digitální a informační agentura (DIA) odhaduje, že se digitálním dokladem prokázalo více než 100.000 voličů. Aplikaci si před volbami či během nich aktualizovalo 247.517 uživatelů. Nových registrací bylo 19.431 a do aplikace se přihlásilo 357.879 lidí. Největší nápor přišel bezprostředně po otevření volebních místností mezi 14. a 16. hodinou, kdy si

    … více »
    Ladislav Hagara | Komentářů: 4
    dnes 00:55 | Pozvánky

    Začal semestr, začal i podzim a kromě hub rostou jako po dešti i veřejné dílny v Praze. Nedávno strahováci referovali o hackerspacu Bordel, nyní se otevřela dílna Dejvice Lab jen kousek od ČVUT. Na blížící Virtuální Bastlírně tak uslyšíte nejen report z návštěvy dílny HWLab, ale i řadu novinek, událostí a úsměvných momentů, které se za poslední měsíc ve světě techniky, ale i vědy udály. Připojte se tedy již v úterý 13.10. od 20:00 a zapojte se do

    … více »
    bkralik | Komentářů: 0
    včera 11:33 | Nová verze

    Byl vydán LineageOS 24 (Mastodon). LineageOS (Wikipedie) je svobodný operační systém pro chytré telefony, tablety a set-top boxy založený na Androidu. Jedná se o nástupce CyanogenModu. LineageOS 24 je založený na Androidu 17.

    Ladislav Hagara | Komentářů: 0
    včera 03:55 | IT novinky

    Společnost Valve publikovala na svém GitLabu nákresy a schémata zapojení headsetu Steam Frame. Pro nekomerční účely.

    Ladislav Hagara | Komentářů: 1
    10.10. 23:11 | Bezpečnostní upozornění

    Soutěž Pwn2Own Ireland 2026 skončila 9. října. Bezpečnostní výzkumníci získali celkem 1 262 000 dolarů na odměnách. Během soutěže bylo předvedeno zneužití 98 zero-day zranitelností. Testování zahrnovalo různé kategorie zařízení a software. Výzkumníci předváděli prakticky fungující útoky podle pravidel soutěže. Výsledky následně slouží výrobcům při přípravě oprav. Mezi pokořenými jsou: Samsung Galaxy S26, OpenAI Codex, Oracle Autonomous AI Database, Google Pixel 10, u iPhone 17 neuspěli.

    vencour | Komentářů: 1
    9.10. 22:44 | Nová verze

    Programovací jazyk Python byl vydán v nové verzi 3.15.0. Podrobný přehled novinek v aktualizované dokumentaci.

    Ladislav Hagara | Komentářů: 20
    9.10. 22:33 | Zajímavý projekt

    BIGWORDS.PAGE je open-source webová aplikace, která po otevření odkazu v prohlížeči vykreslí přes celou obrazovku jednoduché informační sdělení. Zpráva i její nastavení jsou uložené v části URL za znakem #, například odkaz https://bigwords.page/#abclinuxu zobrazí jako velký bílý nápis 'abclinuxu' na černém pozadí. Obsah odkazu lze upravovat i vestavěným editorem, ten umožňuje nastavovat formátování a vizuální efekty textu, časovače, QR kódy a obrázky. Zdrojový kód je dostupný pod licencí MIT na GitHubu.

    ❗Červivý Hřib krade❗ | Komentářů: 10
    9.10. 11:55 | Upozornění

    V neděli 11. října proběhne rotace klíče kořenové zóny. Podruhé v historii. Ondřej Filip na blogu CZ.NIC: "Pokud je pro Vás DNS protokol spíše výzva, ale přesto spravujete nějakou síť či DNS resolver, zkuste si jednoduchý test, který připravila firma Cloudflare na této adrese. Obzvláště zbystřit byste měli, pokud uvidíte nějaká červená políčka."

    Ladislav Hagara | Komentářů: 15
    9.10. 09:55 | IT novinky

    Vláda Spojených států se rozhodla vyřadit americkou softwarovou společnost Microsoft a několik dalších velkých technologických podniků z programu, který umožňuje kvalifikovaným zahraničním pracovníkům získat povolení k trvalému pobytu. Oznámila to včera administrativa amerického prezidenta Donalda Trumpa. Opatření zdůvodnila rozsáhlým zneužíváním programu, který je dlouhodobě terčem kritiky ze strany Trumpových příznivců, neboť prý znevýhodňuje americké pracovníky.

    Ladislav Hagara | Komentářů: 15
    Které desktopové prostředí na Linuxu používáte?
     (9%)
     (7%)
     (4%)
     (21%)
     (29%)
     (8%)
     (6%)
     (2%)
     (14%)
     (20%)
    Celkem 2835 hlasů
     Komentářů: 32, poslední včera 17:02
    Rozcestník

    Administrace komentářů

    Jste na stránce určené pro řešení chyb a problémů týkajících se diskusí a komentářů. Můžete zde našim administrátorům reportovat špatně zařazenou či duplicitní diskusi, vulgární či osočující příspěvek a podobně. Děkujeme vám za vaši pomoc, více očí více vidí, společně můžeme udržet vysokou kvalitu AbcLinuxu.cz.

    Příspěvek
    30.5.2017 20:40 Michal
    Rozbalit Rozbalit vše Re: Mrtvy radic nebo disky nebo softwarovy problem?
    Tak nepomohlo. Ale hodilo to velmi zajimave a nove chyby ;-)
    [  234.472080] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [  234.472084] ata9.00: failed command: FLUSH CACHE EXT
    [  234.472086] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 2
                            res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [  234.472087] ata9.00: status: { DRDY }
    [  234.472090] ata9: hard resetting link
    [  234.472096] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
    [  234.472098] ata10.00: failed command: FLUSH CACHE EXT
    [  234.472100] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 27
                            res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
    [  234.472102] ata10.00: status: { DRDY }
    [  234.472103] ata10: hard resetting link
    [  239.824048] ata9: link is slow to respond, please be patient (ready=0)
    [  239.828066] ata10: link is slow to respond, please be patient (ready=0)
    [  244.504044] ata9: COMRESET failed (errno=-16)
    [  244.504061] ata9: hard resetting link
    [  244.512050] ata10: COMRESET failed (errno=-16)
    [  244.512057] ata10: hard resetting link
    [  249.856015] ata9: link is slow to respond, please be patient (ready=0)
    [  249.864016] ata10: link is slow to respond, please be patient (ready=0)
    [  254.536060] ata9: COMRESET failed (errno=-16)
    [  254.536063] ata9: hard resetting link
    [  254.544033] ata10: COMRESET failed (errno=-16)
    [  254.544038] ata10: hard resetting link
    [  255.388063] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [  259.900016] ata10: link is slow to respond, please be patient (ready=0)
    [  260.572074] ata9.00: qc timeout (cmd 0xec)
    [  260.573155] ata9.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    [  260.573158] ata9.00: revalidation failed (errno=-5)
    [  260.573167] ata9: hard resetting link
    [  265.924044] ata9: link is slow to respond, please be patient (ready=0)
    [  270.604068] ata9: COMRESET failed (errno=-16)
    [  270.604071] ata9: hard resetting link
    [  275.956046] ata9: link is slow to respond, please be patient (ready=0)
    [  276.288061] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [  276.496060] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [  276.498969] ata9.00: failed to read native max address (err_mask=0x1)
    [  276.498971] ata9.00: HPA support seems broken, skipping HPA handling
    [  276.501902] ata9.00: configured for UDMA/133 (device error ignored)
    [  276.501906] ata9.00: retrying FLUSH 0xea Emask 0x4
    [  276.504190] ata9.00: FLUSH failed Emask 0x1
    [  276.504195] ata9.00: device reported invalid CHS sector 0
    [  276.505272] ata9: EH complete
    [  276.517201] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  276.517207] ata9.00: irq_stat 0x40000001
    [  276.517211] ata9.00: failed command: FLUSH CACHE EXT
    [  276.517219] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 3
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  276.517223] ata9.00: status: { DRDY ERR }
    [  276.517225] ata9.00: error: { ABRT }
    [  276.520748] ata9.00: configured for UDMA/133 (device error ignored)
    [  276.520753] ata9.00: device reported invalid CHS sector 0
    [  276.521831] ata9: EH complete
    [  276.533206] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  276.533224] ata9.00: irq_stat 0x40000001
    [  276.533227] ata9.00: failed command: FLUSH CACHE EXT
    [  276.533234] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 4
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  276.533238] ata9.00: status: { DRDY ERR }
    [  276.533240] ata9.00: error: { ABRT }
    [  276.536759] ata9.00: configured for UDMA/133 (device error ignored)
    [  276.536764] ata9.00: device reported invalid CHS sector 0
    [  276.537841] ata9: EH complete
    [  276.549202] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  276.549207] ata9.00: irq_stat 0x40000001
    [  276.549210] ata9.00: failed command: FLUSH CACHE EXT
    [  276.549218] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 5
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  276.549221] ata9.00: status: { DRDY ERR }
    [  276.549224] ata9.00: error: { ABRT }
    [  276.552729] ata9.00: configured for UDMA/133 (device error ignored)
    [  276.552734] ata9.00: device reported invalid CHS sector 0
    [  276.553811] ata9: EH complete
    [  276.565217] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  276.565223] ata9.00: irq_stat 0x40000001
    [  276.565226] ata9.00: failed command: FLUSH CACHE EXT
    [  276.565233] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 6
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  276.565237] ata9.00: status: { DRDY ERR }
    [  276.565239] ata9.00: error: { ABRT }
    [  276.568750] ata9.00: configured for UDMA/133 (device error ignored)
    [  276.568755] ata9.00: device reported invalid CHS sector 0
    [  276.569832] ata9: EH complete
    [  276.581218] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  276.581224] ata9.00: irq_stat 0x40000001
    [  276.581227] ata9.00: failed command: FLUSH CACHE EXT
    [  276.581234] ata9.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 7
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  276.581238] ata9.00: status: { DRDY ERR }
    [  276.581240] ata9.00: error: { ABRT }
    [  276.584745] ata9.00: configured for UDMA/133 (device error ignored)
    [  276.584750] ata9.00: device reported invalid CHS sector 0
    [  276.585843] sd 8:0:0:0: [sdj] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  276.585847] sd 8:0:0:0: [sdj] tag#7 Sense Key : Illegal Request [current]
    [  276.585850] sd 8:0:0:0: [sdj] tag#7 Add. Sense: Unaligned write command
    [  276.585855] sd 8:0:0:0: [sdj] tag#7 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
    [  276.585861] blk_update_request: I/O error, dev sdj, sector 0
    [  276.585882] ata9: EH complete
    [  281.308045] ata10.00: qc timeout (cmd 0xec)
    [  281.309126] ata10.00: failed to IDENTIFY (I/O error, err_mask=0x4)
    [  281.309129] ata10.00: revalidation failed (errno=-5)
    [  281.309136] ata10: hard resetting link
    [  284.860081] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [  284.970447] ata10.00: failed to read native max address (err_mask=0x1)
    [  284.970450] ata10.00: HPA support seems broken, skipping HPA handling
    [  284.975890] ata10.00: configured for UDMA/133 (device error ignored)
    [  284.975894] ata10.00: retrying FLUSH 0xea Emask 0x4
    [  284.978229] ata10.00: FLUSH failed Emask 0x1
    [  284.978233] ata10.00: device reported invalid CHS sector 0
    [  284.979321] ata10: EH complete
    [  284.993228] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  284.993235] ata10.00: irq_stat 0x40000001
    [  284.993239] ata10.00: failed command: FLUSH CACHE EXT
    [  284.993246] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 28
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  284.993250] ata10.00: status: { DRDY ERR }
    [  284.993253] ata10.00: error: { ABRT }
    [  284.996736] ata10.00: configured for UDMA/133 (device error ignored)
    [  284.996741] ata10.00: device reported invalid CHS sector 0
    [  284.997819] ata10: EH complete
    [  285.009204] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.009209] ata10.00: irq_stat 0x40000001
    [  285.009212] ata10.00: failed command: FLUSH CACHE EXT
    [  285.009217] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 29
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.009220] ata10.00: status: { DRDY ERR }
    [  285.009222] ata10.00: error: { ABRT }
    [  285.012738] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.012743] ata10.00: device reported invalid CHS sector 0
    [  285.013819] ata10: EH complete
    [  285.025214] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.025218] ata10.00: irq_stat 0x40000001
    [  285.025221] ata10.00: failed command: FLUSH CACHE EXT
    [  285.025227] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 30
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.025230] ata10.00: status: { DRDY ERR }
    [  285.025232] ata10.00: error: { ABRT }
    [  285.028749] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.028754] ata10.00: device reported invalid CHS sector 0
    [  285.029831] ata10: EH complete
    [  285.041186] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.041190] ata10.00: irq_stat 0x40000001
    [  285.041192] ata10.00: failed command: FLUSH CACHE EXT
    [  285.041196] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.041198] ata10.00: status: { DRDY ERR }
    [  285.041200] ata10.00: error: { ABRT }
    [  285.044687] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.044691] ata10.00: device reported invalid CHS sector 0
    [  285.045781] ata10: EH complete
    [  285.057227] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.057231] ata10.00: irq_stat 0x40000001
    [  285.057233] ata10.00: failed command: FLUSH CACHE EXT
    [  285.057237] ata10.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 1
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.057239] ata10.00: status: { DRDY ERR }
    [  285.057241] ata10.00: error: { ABRT }
    [  285.060725] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.060729] ata10.00: device reported invalid CHS sector 0
    [  285.061808] sd 9:0:0:0: [sdk] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  285.061824] sd 9:0:0:0: [sdk] tag#1 Sense Key : Illegal Request [current]
    [  285.061827] sd 9:0:0:0: [sdk] tag#1 Add. Sense: Unaligned write command
    [  285.061830] sd 9:0:0:0: [sdk] tag#1 CDB: Synchronize Cache(10) 35 00 00 00 00 00 00 00 00 00
    [  285.061836] blk_update_request: I/O error, dev sdk, sector 0
    [  285.061853] ata10: EH complete
    [  285.073161] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.073165] ata10.00: irq_stat 0x40000001
    [  285.073167] ata10.00: failed command: WRITE DMA
    [  285.073172] ata10.00: cmd ca/00:08:88:09:00/00:00:00:00:00/e0 tag 5 dma 4096 out
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.073175] ata10.00: status: { DRDY ERR }
    [  285.073176] ata10.00: error: { ABRT }
    [  285.076668] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.077211] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.077217] ata9.00: irq_stat 0x40000001
    [  285.077221] ata9.00: failed command: WRITE DMA
    [  285.077237] ata9.00: cmd ca/00:08:88:09:00/00:00:00:00:00/e0 tag 2 dma 4096 out
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.077238] ata9.00: status: { DRDY ERR }
    [  285.077239] ata9.00: error: { ABRT }
    [  285.077755] sd 9:0:0:0: [sdk] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  285.077759] sd 9:0:0:0: [sdk] tag#5 Sense Key : Illegal Request [current]
    [  285.077762] sd 9:0:0:0: [sdk] tag#5 Add. Sense: Unaligned write command
    [  285.077767] sd 9:0:0:0: [sdk] tag#5 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 88 00 00 00 08 00 00
    [  285.077769] blk_update_request: I/O error, dev sdk, sector 2440
    [  285.077791] ata10: EH complete
    [  285.081791] ata9.00: configured for UDMA/133 (device error ignored)
    [  285.082901] sd 8:0:0:0: [sdj] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  285.082904] sd 8:0:0:0: [sdj] tag#2 Sense Key : Illegal Request [current]
    [  285.082907] sd 8:0:0:0: [sdj] tag#2 Add. Sense: Unaligned write command
    [  285.082910] sd 8:0:0:0: [sdj] tag#2 CDB: Write(16) 8a 00 00 00 00 00 00 00 09 88 00 00 00 08 00 00
    [  285.082913] blk_update_request: I/O error, dev sdj, sector 2440
    [  285.082928] ata9: EH complete
    [  285.093133] ata10: limiting SATA link speed to 3.0 Gbps
    [  285.093138] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
    [  285.093156] ata10.00: irq_stat 0x40000001
    [  285.093158] ata10.00: failed command: WRITE DMA
    [  285.093163] ata10.00: cmd ca/00:08:88:0b:00/00:00:00:00:00/e0 tag 8 dma 4096 out
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.093165] ata10.00: status: { DRDY ERR }
    [  285.093167] ata10.00: error: { ABRT }
    [  285.093170] ata10: hard resetting link
    [  285.098265] ata9: limiting SATA link speed to 3.0 Gbps
    [  285.098269] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
    [  285.098275] ata9.00: irq_stat 0x40000001
    [  285.098291] ata9.00: failed command: WRITE DMA
    [  285.098293] ata9.00: cmd ca/00:08:88:0b:00/00:00:00:00:00/e0 tag 5 dma 4096 out
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.098294] ata9.00: status: { DRDY ERR }
    [  285.098295] ata9.00: error: { ABRT }
    [  285.098297] ata9: hard resetting link
    [  285.406848] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
    [  285.532063] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 320)
    [  285.535250] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.536336] sd 9:0:0:0: [sdk] tag#8 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  285.536340] sd 9:0:0:0: [sdk] tag#8 Sense Key : Illegal Request [current]
    [  285.536343] sd 9:0:0:0: [sdk] tag#8 Add. Sense: Unaligned write command
    [  285.536347] sd 9:0:0:0: [sdk] tag#8 CDB: Write(16) 8a 00 00 00 00 00 00 00 0b 88 00 00 00 08 00 00
    [  285.536350] blk_update_request: I/O error, dev sdk, sector 2952
    [  285.536376] ata10: EH complete
    [  285.536430] ata9.00: configured for UDMA/133 (device error ignored)
    [  285.537534] sd 8:0:0:0: [sdj] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  285.537538] sd 8:0:0:0: [sdj] tag#5 Sense Key : Illegal Request [current]
    [  285.537542] sd 8:0:0:0: [sdj] tag#5 Add. Sense: Unaligned write command
    [  285.537546] sd 8:0:0:0: [sdj] tag#5 CDB: Write(16) 8a 00 00 00 00 00 00 00 0b 88 00 00 00 08 00 00
    [  285.537549] blk_update_request: I/O error, dev sdj, sector 2952
    [  285.537595] ata9: EH complete
    [  285.549121] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.549139] ata10.00: irq_stat 0x40000001
    [  285.549143] ata10.00: failed command: WRITE DMA EXT
    [  285.549149] ata10.00: cmd 35/00:08:88:5d:50/00:00:5d:01:00/e0 tag 12 dma 4096 out
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.549152] ata10.00: status: { DRDY ERR }
    [  285.549154] ata10.00: error: { ABRT }
    [  285.549185] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.549202] ata9.00: irq_stat 0x40000001
    [  285.549205] ata9.00: failed command: WRITE DMA EXT
    [  285.549212] ata9.00: cmd 35/00:08:88:5d:50/00:00:5d:01:00/e0 tag 9 dma 4096 out
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.549215] ata9.00: status: { DRDY ERR }
    [  285.549217] ata9.00: error: { ABRT }
    [  285.553903] ata9.00: configured for UDMA/133 (device error ignored)
    [  285.553930] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.555000] sd 8:0:0:0: [sdj] tag#9 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  285.555004] sd 8:0:0:0: [sdj] tag#9 Sense Key : Illegal Request [current]
    [  285.555006] sd 8:0:0:0: [sdj] tag#9 Add. Sense: Unaligned write command
    [  285.555010] sd 8:0:0:0: [sdj] tag#9 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5d 88 00 00 00 08 00 00
    [  285.555012] blk_update_request: I/O error, dev sdj, sector 5860515208
    [  285.555028] ata9: EH complete
    [  285.555047] sd 9:0:0:0: [sdk] tag#12 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  285.555051] sd 9:0:0:0: [sdk] tag#12 Sense Key : Illegal Request [current]
    [  285.555054] sd 9:0:0:0: [sdk] tag#12 Add. Sense: Unaligned write command
    [  285.555057] sd 9:0:0:0: [sdk] tag#12 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5d 88 00 00 00 08 00 00
    [  285.555060] blk_update_request: I/O error, dev sdk, sector 5860515208
    [  285.555075] ata10: EH complete
    [  285.569173] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.569179] ata9.00: irq_stat 0x40000001
    [  285.569184] ata9.00: failed command: WRITE DMA EXT
    [  285.569192] ata9.00: cmd 35/00:08:88:5f:50/00:00:5d:01:00/e0 tag 11 dma 4096 out
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.569196] ata9.00: status: { DRDY ERR }
    [  285.569199] ata9.00: error: { ABRT }
    [  285.569219] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.569221] ata10.00: irq_stat 0x40000001
    [  285.569222] ata10.00: failed command: WRITE DMA EXT
    [  285.569224] ata10.00: cmd 35/00:08:88:5f:50/00:00:5d:01:00/e0 tag 16 dma 4096 out
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.569225] ata10.00: status: { DRDY ERR }
    [  285.569226] ata10.00: error: { ABRT }
    [  285.573953] ata9.00: configured for UDMA/133 (device error ignored)
    [  285.573980] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.575036] sd 8:0:0:0: [sdj] tag#11 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  285.575040] sd 8:0:0:0: [sdj] tag#11 Sense Key : Illegal Request [current]
    [  285.575043] sd 8:0:0:0: [sdj] tag#11 Add. Sense: Unaligned write command
    [  285.575048] sd 8:0:0:0: [sdj] tag#11 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5f 88 00 00 00 08 00 00
    [  285.575050] blk_update_request: I/O error, dev sdj, sector 5860515720
    [  285.575077] ata9: EH complete
    [  285.575086] sd 9:0:0:0: [sdk] tag#16 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  285.575089] sd 9:0:0:0: [sdk] tag#16 Sense Key : Illegal Request [current]
    [  285.575092] sd 9:0:0:0: [sdk] tag#16 Add. Sense: Unaligned write command
    [  285.575095] sd 9:0:0:0: [sdk] tag#16 CDB: Write(16) 8a 00 00 00 00 01 5d 50 5f 88 00 00 00 08 00 00
    [  285.575097] blk_update_request: I/O error, dev sdk, sector 5860515720
    [  285.575111] ata10: EH complete
    [  285.589147] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.589153] ata10.00: irq_stat 0x40000001
    [  285.589158] ata10.00: failed command: READ DMA
    [  285.589166] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 19 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.589170] ata10.00: status: { DRDY ERR }
    [  285.589173] ata10.00: error: { ABRT }
    [  285.589192] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.589209] ata9.00: irq_stat 0x40000001
    [  285.589211] ata9.00: failed command: READ DMA
    [  285.589213] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 15 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.589214] ata9.00: status: { DRDY ERR }
    [  285.589215] ata9.00: error: { ABRT }
    [  285.593911] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.593932] ata9.00: configured for UDMA/133 (device error ignored)
    [  285.594986] ata10: EH complete
    [  285.595012] ata9: EH complete
    [  285.609121] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.609125] ata10.00: irq_stat 0x40000001
    [  285.609129] ata10.00: failed command: READ DMA
    [  285.609136] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 20 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.609140] ata10.00: status: { DRDY ERR }
    [  285.609143] ata10.00: error: { ABRT }
    [  285.609171] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.609173] ata9.00: irq_stat 0x40000001
    [  285.609174] ata9.00: failed command: READ DMA
    [  285.609176] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 16 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.609177] ata9.00: status: { DRDY ERR }
    [  285.609178] ata9.00: error: { ABRT }
    [  285.613872] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.613892] ata9.00: configured for UDMA/133 (device error ignored)
    [  285.614945] ata10: EH complete
    [  285.614986] ata9: EH complete
    [  285.629145] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.629148] ata10.00: irq_stat 0x40000001
    [  285.629152] ata10.00: failed command: READ DMA
    [  285.629159] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 21 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.629162] ata10.00: status: { DRDY ERR }
    [  285.629165] ata10.00: error: { ABRT }
    [  285.629216] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.629217] ata9.00: irq_stat 0x40000001
    [  285.629219] ata9.00: failed command: READ DMA
    [  285.629221] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 17 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.629222] ata9.00: status: { DRDY ERR }
    [  285.629223] ata9.00: error: { ABRT }
    [  285.633864] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.633889] ata9.00: configured for UDMA/133 (device error ignored)
    [  285.634936] ata10: EH complete
    [  285.634971] ata9: EH complete
    [  285.649140] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.649143] ata10.00: irq_stat 0x40000001
    [  285.649147] ata10.00: failed command: READ DMA
    [  285.649154] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 22 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.649157] ata10.00: status: { DRDY ERR }
    [  285.649160] ata10.00: error: { ABRT }
    [  285.649191] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  285.649193] ata9.00: irq_stat 0x40000001
    [  285.649194] ata9.00: failed command: READ DMA
    [  285.649196] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 18 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.649198] ata9.00: status: { DRDY ERR }
    [  285.649198] ata9.00: error: { ABRT }
    [  285.653886] ata10.00: configured for UDMA/133 (device error ignored)
    [  285.653905] ata9.00: configured for UDMA/133 (device error ignored)
    [  285.654957] ata10: EH complete
    [  285.654986] ata9: EH complete
    [  285.669132] ata10: limiting SATA link speed to 1.5 Gbps
    [  285.669135] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
    [  285.669138] ata10.00: irq_stat 0x40000001
    [  285.669141] ata10.00: failed command: READ DMA
    [  285.669148] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 23 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.669152] ata10.00: status: { DRDY ERR }
    [  285.669154] ata10.00: error: { ABRT }
    [  285.669158] ata10: hard resetting link
    [  285.669196] ata9: limiting SATA link speed to 1.5 Gbps
    [  285.669198] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
    [  285.669199] ata9.00: irq_stat 0x40000001
    [  285.669201] ata9.00: failed command: READ DMA
    [  285.669203] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 19 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  285.669204] ata9.00: status: { DRDY ERR }
    [  285.669205] ata9.00: error: { ABRT }
    [  285.669207] ata9: hard resetting link
    [  285.982329] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
    [  286.110757] ata10.00: configured for UDMA/133 (device error ignored)
    [  286.111844] ata10: EH complete
    [  286.125192] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.125198] ata10.00: irq_stat 0x40000001
    [  286.125202] ata10.00: failed command: READ DMA
    [  286.125210] ata10.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 24 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.125214] ata10.00: status: { DRDY ERR }
    [  286.125217] ata10.00: error: { ABRT }
    [  286.128728] ata10.00: configured for UDMA/133 (device error ignored)
    [  286.129830] sd 9:0:0:0: [sdk] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  286.129834] sd 9:0:0:0: [sdk] tag#24 Sense Key : Illegal Request [current]
    [  286.129837] sd 9:0:0:0: [sdk] tag#24 Add. Sense: Unaligned write command
    [  286.129841] sd 9:0:0:0: [sdk] tag#24 CDB: Read(16) 88 00 00 00 00 00 00 00 0a 10 00 00 00 10 00 00
    [  286.129843] blk_update_request: I/O error, dev sdk, sector 2576
    [  286.129860] ata10: EH complete
    [  286.141168] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.141185] ata10.00: irq_stat 0x40000001
    [  286.141188] ata10.00: failed command: READ DMA EXT
    [  286.141193] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 27 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.141195] ata10.00: status: { DRDY ERR }
    [  286.141197] ata10.00: error: { ABRT }
    [  286.144696] ata10.00: configured for UDMA/133 (device error ignored)
    [  286.145795] ata10: EH complete
    [  286.157185] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.157189] ata10.00: irq_stat 0x40000001
    [  286.157192] ata10.00: failed command: READ DMA EXT
    [  286.157197] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 28 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.157199] ata10.00: status: { DRDY ERR }
    [  286.157201] ata10.00: error: { ABRT }
    [  286.160056] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
    [  286.160771] ata10.00: configured for UDMA/133 (device error ignored)
    [  286.161886] ata10: EH complete
    [  286.163762] ata9.00: configured for UDMA/133 (device error ignored)
    [  286.164856] ata9: EH complete
    [  286.173185] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.173189] ata10.00: irq_stat 0x40000001
    [  286.173192] ata10.00: failed command: READ DMA EXT
    [  286.173197] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 29 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.173199] ata10.00: status: { DRDY ERR }
    [  286.173201] ata10.00: error: { ABRT }
    [  286.176696] ata10.00: configured for UDMA/133 (device error ignored)
    [  286.177148] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.177155] ata9.00: irq_stat 0x40000001
    [  286.177159] ata9.00: failed command: READ DMA
    [  286.177167] ata9.00: cmd c8/00:10:10:0a:00/00:00:00:00:00/e0 tag 20 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.177171] ata9.00: status: { DRDY ERR }
    [  286.177174] ata9.00: error: { ABRT }
    [  286.177773] ata10: EH complete
    [  286.181689] ata9.00: configured for UDMA/133 (device error ignored)
    [  286.182794] ata9: EH complete
    [  286.193206] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.193210] ata10.00: irq_stat 0x40000001
    [  286.193214] ata10.00: failed command: READ DMA EXT
    [  286.193219] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 30 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.193222] ata10.00: status: { DRDY ERR }
    [  286.193224] ata10.00: error: { ABRT }
    [  286.196714] ata10.00: configured for UDMA/133 (device error ignored)
    [  286.197164] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.197170] ata9.00: irq_stat 0x40000001
    [  286.197175] ata9.00: failed command: READ DMA EXT
    [  286.197183] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 24 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.197198] ata9.00: status: { DRDY ERR }
    [  286.197199] ata9.00: error: { ABRT }
    [  286.197791] ata10: EH complete
    [  286.201724] ata9.00: configured for UDMA/133 (device error ignored)
    [  286.202804] ata9: EH complete
    [  286.213201] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.213206] ata10.00: irq_stat 0x40000001
    [  286.213209] ata10.00: failed command: READ DMA EXT
    [  286.213215] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 0 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.213218] ata10.00: status: { DRDY ERR }
    [  286.213220] ata10.00: error: { ABRT }
    [  286.216699] ata10.00: configured for UDMA/133 (device error ignored)
    [  286.217186] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.217193] ata9.00: irq_stat 0x40000001
    [  286.217209] ata9.00: failed command: READ DMA EXT
    [  286.217211] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 25 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.217212] ata9.00: status: { DRDY ERR }
    [  286.217213] ata9.00: error: { ABRT }
    [  286.217776] ata10: EH complete
    [  286.221691] ata9.00: configured for UDMA/133 (device error ignored)
    [  286.222771] ata9: EH complete
    [  286.233210] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.233216] ata9.00: irq_stat 0x40000001
    [  286.233220] ata9.00: failed command: READ DMA EXT
    [  286.233228] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 26 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.233232] ata9.00: status: { DRDY ERR }
    [  286.233245] ata9.00: error: { ABRT }
    [  286.233252] ata10.00: limiting speed to UDMA/100:PIO4
    [  286.233254] ata10.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
    [  286.233255] ata10.00: irq_stat 0x40000001
    [  286.233256] ata10.00: failed command: READ DMA EXT
    [  286.233259] ata10.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 1 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.233260] ata10.00: status: { DRDY ERR }
    [  286.233261] ata10.00: error: { ABRT }
    [  286.233262] ata10: hard resetting link
    [  286.453824] ata9.00: configured for UDMA/133 (device error ignored)
    [  286.454904] ata9: EH complete
    [  286.469173] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.469179] ata9.00: irq_stat 0x40000001
    [  286.469184] ata9.00: failed command: READ DMA EXT
    [  286.469192] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 27 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.469196] ata9.00: status: { DRDY ERR }
    [  286.469199] ata9.00: error: { ABRT }
    [  286.472690] ata9.00: configured for UDMA/133 (device error ignored)
    [  286.473787] ata9: EH complete
    [  286.485210] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
    [  286.485214] ata9.00: irq_stat 0x40000001
    [  286.485218] ata9.00: failed command: READ DMA EXT
    [  286.485224] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 28 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.485227] ata9.00: status: { DRDY ERR }
    [  286.485229] ata9.00: error: { ABRT }
    [  286.488712] ata9.00: configured for UDMA/133 (device error ignored)
    [  286.489791] ata9: EH complete
    [  286.501226] ata9.00: limiting speed to UDMA/100:PIO4
    [  286.501229] ata9.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
    [  286.501233] ata9.00: irq_stat 0x40000001
    [  286.501237] ata9.00: failed command: READ DMA EXT
    [  286.501243] ata9.00: cmd 25/00:10:10:5c:50/00:00:5d:01:00/e0 tag 29 dma 8192 in
                            res 51/04:00:00:00:00/00:00:00:00:00/00 Emask 0x1 (device error)
    [  286.501246] ata9.00: status: { DRDY ERR }
    [  286.501248] ata9.00: error: { ABRT }
    [  286.501252] ata9: hard resetting link
    [  286.546666] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
    [  286.724819] ata10.00: failed to set xfermode (err_mask=0x1)
    [  291.548047] ata10: hard resetting link
    [  291.548117] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
    [  291.768616] ata9.00: failed to set xfermode (err_mask=0x1)
    [  296.668046] ata9: hard resetting link
    [  296.668114] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
    [  296.888622] ata10.00: failed to set xfermode (err_mask=0x1)
    [  296.888631] ata10.00: limiting speed to UDMA/100:PIO3
    [  301.788056] ata10: hard resetting link
    [  301.788088] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
    [  302.008634] ata9.00: failed to set xfermode (err_mask=0x1)
    [  302.008643] ata9.00: limiting speed to UDMA/100:PIO3
    [  306.908060] ata9: hard resetting link
    [  306.908128] ata10: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
    [  307.128638] ata10.00: failed to set xfermode (err_mask=0x1)
    [  307.128646] ata10.00: disabled
    [  307.130790] scsi_io_completion: 1 callbacks suppressed
    [  307.130797] sd 9:0:0:0: [sdk] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  307.130802] sd 9:0:0:0: [sdk] tag#1 Sense Key : Not Ready [current]
    [  307.130805] sd 9:0:0:0: [sdk] tag#1 Add. Sense: Logical unit not ready, hard reset required
    [  307.130811] sd 9:0:0:0: [sdk] tag#1 CDB: Read(16) 88 00 00 00 00 01 5d 50 5c 10 00 00 00 10 00 00
    [  307.130812] blk_update_request: 1 callbacks suppressed
    [  307.130815] blk_update_request: I/O error, dev sdk, sector 5860514832
    [  307.130834] ata10: EH complete
    [  307.130864] sd 9:0:0:0: [sdk] tag#5 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.130868] sd 9:0:0:0: [sdk] tag#5 CDB: Read(16) 88 00 00 00 00 01 5d 50 5e 10 00 00 00 10 00 00
    [  307.130869] blk_update_request: I/O error, dev sdk, sector 5860515344
    [  307.131119] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.131120] sd 9:0:0:0: [sdk] Sense not available.
    [  307.131340] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.131341] sd 9:0:0:0: [sdk] Sense not available.
    [  307.222750] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 310)
    [  307.226292] ata9.00: failed to set xfermode (err_mask=0x1)
    [  307.226299] ata9.00: disabled
    [  307.228473] sd 8:0:0:0: [sdj] tag#29 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
    [  307.228478] sd 8:0:0:0: [sdj] tag#29 Sense Key : Not Ready [current]
    [  307.228481] sd 8:0:0:0: [sdj] tag#29 Add. Sense: Logical unit not ready, hard reset required
    [  307.228485] sd 8:0:0:0: [sdj] tag#29 CDB: Read(16) 88 00 00 00 00 01 5d 50 5c 10 00 00 00 10 00 00
    [  307.228488] blk_update_request: I/O error, dev sdj, sector 5860514832
    [  307.228508] ata9: EH complete
    [  307.228533] sd 8:0:0:0: [sdj] tag#1 FAILED Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.228536] sd 8:0:0:0: [sdj] tag#1 CDB: Read(16) 88 00 00 00 00 01 5d 50 5e 10 00 00 00 10 00 00
    [  307.228538] blk_update_request: I/O error, dev sdj, sector 5860515344
    [  307.228621] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.228622] sd 8:0:0:0: [sdj] Sense not available.
    [  307.228644] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.228645] sd 8:0:0:0: [sdj] Sense not available.
    [  307.228673] sdj: detected capacity change from 3000592982016 to 0
    [  307.228722] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.228723] sd 8:0:0:0: [sdj] Sense not available.
    [  307.228959] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.228961] sd 8:0:0:0: [sdj] Sense not available.
    [  307.699385] sd 9:0:0:0: [sdk] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.699388] sd 9:0:0:0: [sdk] Sense not available.
    [  307.699604] sd 9:0:0:0: [sdk] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.699605] sd 9:0:0:0: [sdk] Sense not available.
    [  307.699967] sd 8:0:0:0: [sdj] Read Capacity(16) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.699968] sd 8:0:0:0: [sdj] Sense not available.
    [  307.700044] sd 8:0:0:0: [sdj] Read Capacity(10) failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK
    [  307.700046] sd 8:0:0:0: [sdj] Sense not available.
    

    V tomto formuláři můžete formulovat svou stížnost ohledně příspěvku. Nejprve vyberte typ akce, kterou navrhujete provést s diskusí či příspěvkem. Potom do textového pole napište důvody, proč by měli admini provést vaši žádost, problém nemusí být patrný na první pohled. Odkaz na příspěvek bude přidán automaticky.

    Vaše jméno
    Váš email
    Typ požadavku
    Slovní popis
    ISSN 1214-1267   www.czech-server.cz
    © 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.