Administrace komentářů

002 "test" #1: initiating Main Mode
104 "test" #1: STATE_MAIN_I1: initiate
002 "test" #1: transition from state STATE_MAIN_I1 to state STATE_MAIN_I2
106 "test" #1: STATE_MAIN_I2: sent MI2, expecting MR2
003 "test" #1: ignoring unknown Vendor ID payload [4ad99c93f043adff9bfbc4e65e39fd46]
002 "test" #1: transition from state STATE_MAIN_I2 to state STATE_MAIN_I3
108 "test" #1: STATE_MAIN_I3: sent MI3, expecting MR3
002 "test" #1: Main mode peer ID is ID_IPV4_ADDR: 'X.X.X.X'
002 "test" #1: transition from state STATE_MAIN_I3 to state STATE_MAIN_I4
004 "test" #1: STATE_MAIN_I4: ISAKMP SA established {auth=PRESHARED_KEY cipher=aes_256 integ=sha group=MODP1024}
002 "test" #2: initiating Quick Mode PSK+ENCRYPT+UP+IKEV1_ALLOW+IKEV2_ALLOW+SAREF_TRACK+IKE_FRAG_ALLOW+ESN_NO {using isakmp#1 msgid:b0ac2fb9 proposal=defaults pfsgroup=no-pfs}
117 "test" #2: STATE_QUICK_I1: initiate
003 "test" #2: ignoring informational payload IPSEC_RESPONDER_LIFETIME, msgid=b0ac2fb9, length=28
003 "test" #2: NAT-Traversal: received 2 NAT-OA. Ignored because peer is not NATed
003 "test" #2: our client subnet returned doesn't match my proposal - us:192.168.62.112/32 vs them:62.44.6.164/32
003 "test" #2: Allowing questionable proposal anyway [ALLOW_MICROSOFT_BAD_PROPOSAL]
003 "test" #2: our client peer returned port doesn't match my proposal - us:1701 vs them:0
003 "test" #2: Allowing bad L2TP/IPsec proposal (see bug #849) anyway
002 "test" #2: transition from state STATE_QUICK_I1 to state STATE_QUICK_I2
004 "test" #2: STATE_QUICK_I2: sent QI2, IPsec SA established transport mode {ESP/NAT=>0xb328667d <0x897c680b xfrm=3DES_0-HMAC_SHA1 NATOA=none NATD=X.X.X.X:4500 DPD=passive}

[global]
access control = yes
port = 1701
debug tunnel = yes
debug avp = yes
debug network = yes
debug packet = yes
debug state = yes

[lac test]
lns = X.X.X.X
ppp debug = yes
pppoptfile = /etc/ppp/rewe.xl2tpd.config
;length bit = yes
bps = 1000000

ipcp-accept-local
ipcp-accept-remote
noccp
noauth
idle 1800
mtu 1410
mru 1410
defaultroute
usepeerdns
debug
connect-delay 5000