Administrace komentářů

LSI Logic / Symbios Logic MegaRAID SAS 2108 [Liberator] (rev 05)
# MegaCli64 -AdpBbuCmd -GetBbuStatus -a0 -NoLog | egrep -i 'charge|battery'                                     
BBU status for Adapter: 0

BatteryType: iBBU
Voltage: 4054 mV
Current: 48 mA
Temperature: 33 C
Battery State: Degraded(Need Attention) 
                A manual learn is required.
BBU Firmware Status:

  Charging Status              : Charging
  Voltage                                 : OK
  Temperature                             : OK
  Learn Cycle Requested                   : Yes
  Learn Cycle Active                      : No
  Learn Cycle Status                      : OK
  Learn Cycle Timeout                     : No
  I2c Errors Detected                     : No
  Battery Pack Missing                    : No
  Battery Replacement required            : No
  Remaining Capacity Low                  : No
  Periodic Learn Required                 : No
  Transparent Learn                       : No
  No space to cache offload               : No
  Pack is about to fail & should be replaced : No
  Cache Offload premium feature required  : No
  Module microcode update required        : No


GasGuageStatus:
  Fully Discharged        : No
  Fully Charged           : No
  Discharging             : No
  Initialized             : Yes
  Remaining Time Alarm    : No
  Discharge Terminated    : No
  Over Temperature        : No
  Charging Terminated     : No
  Over Charged            : No
  Relative State of Charge: 90 %
  Charger System State: 49168
  Charger System Ctrl: 0
  Charging current: 512 mA
  Absolute state of charge: 90 %
  Max Error: 12 %

Exit Code: 0x00

                         

MegaCli64 -AdpBbuCmd -BbuLearn -a0
                                     
Adapter 0: BBU Learn Failed

Exit Code: 0x01