Administrace komentářů

Zdravím,

mám problém s nainstalovanou verzí Clonezilly a potřebuji jej vyřešit. Dělám to pro někoho a v daném případě nelze použít Clonezillu LIVE. Když jsem to několikrát zkoušel na svém pc, tak to dopadlo vždy stejně. Zavedu systém s nainstalovanou Clonezillou na sda. Sdb i sdc jsou odpojeny. Z terminálu spustím Clonezillu, vyberu co, kam a jak a na konci to vždy spadne. Postupuji stejně, jako při používání LIVE a tam mi to funguje perfektně. Dotyčnému se taky nedaří úspěšně zazálohovat. Jemu to prý sice dojede, ale výsledná záloha má jen pár MB. Tušíte někdo, čím by to mohlo být?

Tady je výpis:

~ $ sudo clonezilla 
Clonezilla mode is device-image
ocsroot device is local_dev
Preparing the mount point /home/partimag...
If you want to use USB device as a Clonezilla image repository, please
 * Insert USB device into this machine *now*
 * Wait for about 5 secs 
 * Press Enter key 
so that the OS can detect the USB device and later we can mount it as /home/partimag.
Press "Enter" to continue......
Informing the OS of partition table changes...
Mounting local dev as /home/partimag...
Excluding busy partition or disk...
Getting /dev/sda1 info...
Getting /dev/sda2 info...
Getting /dev/sdb1 info...
Getting /dev/sdc1 info...
/dev/sdc1 filesystem: ntfs
ntfs-3g /dev/sdc1 /tmp/local-dev -o noatime
Scanning dir /tmp/local-dev... done!
The file system disk space usage
*****************************************************.
Souborový systém Velikost Užito Volno Uži% Připojeno do
sysfs                   0     0     0    - /sys
proc                    0     0     0    - /proc
udev                 7,8G     0  7,8G   0% /dev
devpts                  0     0     0    - /dev/pts
tmpfs                1,6G  9,5M  1,6G   1% /run
/dev/sda4             99G   23G   71G  25% /
securityfs              0     0     0    - /sys/kernel/security
tmpfs                7,8G  288K  7,8G   1% /dev/shm
tmpfs                5,0M  4,0K  5,0M   1% /run/lock
tmpfs                7,8G     0  7,8G   0% /sys/fs/cgroup
cgroup                  0     0     0    - /sys/fs/cgroup/systemd
pstore                  0     0     0    - /sys/fs/pstore
cgroup                  0     0     0    - /sys/fs/cgroup/memory
cgroup                  0     0     0    - /sys/fs/cgroup/net_cls,net_prio
cgroup                  0     0     0    - /sys/fs/cgroup/hugetlb
cgroup                  0     0     0    - /sys/fs/cgroup/devices
cgroup                  0     0     0    - /sys/fs/cgroup/cpu,cpuacct
cgroup                  0     0     0    - /sys/fs/cgroup/pids
cgroup                  0     0     0    - /sys/fs/cgroup/blkio
cgroup                  0     0     0    - /sys/fs/cgroup/perf_event
cgroup                  0     0     0    - /sys/fs/cgroup/cpuset
cgroup                  0     0     0    - /sys/fs/cgroup/freezer
systemd-1               -     -     -    - /proc/sys/fs/binfmt_misc
hugetlbfs               0     0     0    - /dev/hugepages
mqueue                  0     0     0    - /dev/mqueue
debugfs                 0     0     0    - /sys/kernel/debug
fusectl                 0     0     0    - /sys/fs/fuse/connections
/dev/sda3            266G   92G  174G  35% /media/petr/DATA
binfmt_misc             0     0     0    - /proc/sys/fs/binfmt_misc
cgmfs                100K     0  100K   0% /run/cgmanager/fs
tmpfs                1,6G   32K  1,6G   1% /run/user/1000
gvfsd-fuse           0,0K  0,0K  0,0K    - /run/user/1000/gvfs
/dev/sdc1            699G  213M  699G   1% /tmp/local-dev
/dev/sdc1            699G  213M  699G   1% /home/partimag
*****************************************************.
Press "Enter" to continue......
done!
Setting the TERM as xterm-256color
Starting /usr/sbin/ocs-sr at 2018-01-12 13:48:23 CET...
Choose the mode for ocs-sr
*****************************************************.
Clonezilla image dir: /home/partimag
*****************************************************.
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
Excluding busy partition or disk...
Selected device [sdb] found!
The selected devices: sdb
*****************************************************.
PS. Next time you can run this command directly:
/usr/sbin/ocs-sr -q2 -j2 -z3 -i 200000 -sc -p true savedisk 2018-01-12-13-img sdb
This command is also saved as this file name for later use if necessary: /tmp/ocs-2018-01-12-13-img-2018-01-12-13-49
*****************************************************.
Press "Enter" to continue... 
setterm: terminal xterm-256color does not support --blank
Activating the partition info in /proc... done!
Selected device [sdb] found!
The selected devices: sdb
Searching for data partition(s)...
Excluding busy partition or disk...
Unmounted partitions (including extended or swap): sdb1
Collecting info.. done!
Searching for swap partition(s)...
Excluding busy partition or disk...
Unmounted partitions (including extended or swap): sdb1
Collecting info.. done!
The data partition to be saved:   sdb1
The swap partition to be saved:  
setterm: terminal xterm-256color does not support --blank
Activating the partition info in /proc... done!
Selected device [sdb1] found!
The selected devices: sdb1
Getting /dev/sdb1 info...
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
Saving block devices info in /home/partimag/2018-01-12-13-img/blkdev.list...
Saving block devices attributes in /home/partimag/2018-01-12-13-img/blkid.list...
Checking the integrity of partition table in the disk /dev/sdb... 
Reading the partition table for /dev/sdb...RETVAL=0
*****************************************************.
The first partition of disk /dev/sdb starts at 2048.
Saving the hidden data between MBR (1st sector, i.e. 512 bytes) and 1st partition, which might be useful for some recovery tool, by:
dd if=/dev/sdb of=/home/partimag/2018-01-12-13-img/sdb-hidden-data-after-mbr skip=1 bs=512 count=2047
2047+0 vstoupivších záznamů
2047+0 vystoupivších záznamů
1048064 bajtů (1,0 MB, 1,0 MiB) zkopírováno, 0,0355629 s, 29,5 MB/s
*****************************************************.
done!
Saving the MBR data for sdb...
1+0 vstoupivších záznamů
1+0 vystoupivších záznamů
512 bajtů zkopírováno, 0,000630107 s, 813 kB/s
*****************************************************.
*****************************************************.
Starting saving /dev/sdb1 as /home/partimag/2018-01-12-13-img/sdb1.XXX...
/dev/sdb1 filesystem: ntfs.
*****************************************************.
Checking file system integrity in /dev/sdb1... done!
Use gzip to compress the image.
Image file will be split with size limit 200000 MB.
*****************************************************.
Run partimage: partimage -M -f3 -o -d -b -c -z0 --volume=0  --debug=1 -B gui=no save /dev/sdb1 stdout | gzip -c --fast --rsyncable | split -b 200000m - /home/partimag/2018-01-12-13-img/sdb1.
/usr/share/drbl/sbin/ocs-functions: line 1304: partimage: command not found
>>> Time elapsed: 0 secs (~ 0 mins)
*****************************************************.
Finished saving /dev/sdb1 as /home/partimag/2018-01-12-13-img/sdb1.XXX
*****************************************************.
Failed to save partition /dev/sdb1.
Press "Enter" to continue......

Petr