Administrace komentářů

Díky za tak pracnou odpověď.

Já se právě do těch souborů včera koukal, ale to víš, jak vy tomu nerozumím. Uvědomil jsem si jednou věc. Vždy když zálohuji, tak nastavím dostatčenou velikost, aby záloha nebyla rozsekaná na více dílů. Problém je, že mám zafixováno, že Clonezilla zálohuje jen obsazený prostor. No a já si při zálohování neuvědomil, že fleška je šifrovaná a bude se zálohovat celá kapacita flešky. Fleška má podle GParted 30560 MiB, což je 32000 MB. Já při její záloze nastavil 30720, jenže problém je možná v tom, že Clonezilla asi používá MB a ne MiB. Když jsem ale projížděl ty soubory, tak se mi vše zdálo OK. Na konci bylo, že všechny obrazy partícií, nebo LV disků byly zkontrolovány a jsou obnovitelné. Takže možná došlo ke kompresi, ale Nemo mi ukazuje velikost obrazu 30,9 GB, což by nesedělo ve vztahu k nastavené velikosti 30720 při zálohování.

Clonezilla-img (místy rozsypaný čaj):

This image was saved by Clonezilla at 2019-01-31 10:45:52 UTC.
Saved by clonezilla-live-20190108-cosmic-amd64.
The log during saving:
----------------------------------------------------------
Starting /usr/sbin/ocs-sr at 2019-01-31 10:35:08 UTC...
*****************************************************.
Clonezilla image dir: /home/partimag
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
The selected devices: sdc
PS. Nabudúce môžte spustiť tento príkaz priamo:
/usr/sbin/ocs-sr -q2 -j2 -z3 -i 30720 -fsck-y -senc -p choose savedisk 19-01-31-img sdc
*****************************************************.
The selected devices: sdc
Searching for data/swap/extended partition(s)...
The data partition to be saved: sdc1 sdc2 sdc3
The selected devices: sdc1 sdc2 sdc3
Shutting down the Logical Volume Manager
Finished Shutting down the Logical Volume Manager
Saving block devices info in /home/partimag/19-01-31-img/blkdev.list...
Saving block devices attributes in /home/partimag/19-01-31-img/blkid.list...
Checking the integrity of partition table in the disk /dev/sdc... 
Reading the partition table for /dev/sdc...RETVAL=0
*****************************************************.
Saving the primary GPT of sdc as /home/partimag/19-01-31-img/sdc-gpt-1st by dd...
34+0 records in
34+0 records out
17408 bytes (17 kB, 17 KiB) copied, 0.0013449 s, 12.9 MB/s
*****************************************************.
Saving the secondary GPT of sdc as /home/partimag/19-01-31-img/sdc-gpt-2nd by dd...
32+0 records in
32+0 records out
16384 bytes (16 kB, 16 KiB) copied, 0.030424 s, 539 kB/s
*****************************************************.
Saving the GPT of sdc as /home/partimag/19-01-31-img/sdc-gpt.gdisk by gdisk...
The operation has completed successfully.
*****************************************************.
Saving the MBR data for sdc...
1+0 records in
1+0 records out
512 bytes copied, 0,000335 s, 1,5 MB/s
Starting saving /dev/sdc1 as /home/partimag/19-01-31-img/sdc1.XXX...
/dev/sdc1 filesystem: BIOS.
*****************************************************.
*****************************************************.
Use partclone with lzop to save the image.
Image file will be split with size limit 30720 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.dd -z 10485760 -N -L /var/log/partclone.log -s /dev/sdc1 --output - | lzop -c -3 | split -a 2 -b 30720MB - /home/partimag/19-01-31-img/sdc1.dd-ptcl-img.lzo. 2> /tmp/split_error.6OfSNX
Partclone v0.3.12 http://partclone.org
Starting to clone/restore (/dev/sdc1) to (-) with dd mode
get device size 4194304 by ioctl BLKGETSIZE64,
memory needed: 20972544 bytes
bitmap 1024 bytes, blocks 2*10485760 bytes, checksum 0 bytes
Calculating bitmap... Please wait... done!
File system:  raw
Device size:    4.2 MB = 8192 Blocks
Space in use:   4.2 MB = 8192 Blocks
Free Space:     0 Byte = 0 Blocks
Block size:   512 Byte
Total block 8192
Syncing... OK!
>>> Time elapsed: 6.10 secs (~ .101 mins)
*****************************************************.
Finished saving /dev/sdc1 as /home/partimag/19-01-31-img/sdc1.dd-ptcl-img.lzo
*****************************************************.
Starting saving /dev/sdc2 as /home/partimag/19-01-31-img/sdc2.XXX...
/dev/sdc2 filesystem: vfat.
*****************************************************.
*****************************************************.
Use partclone with lzop to save the image.
Image file will be split with size limit 30720 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.vfat -z 10485760 -N -L /var/log/partclone.log -c -s /dev/sdc2 --output - | lzop -c -3 | split -a 2 -b 30720MB - /home/partimag/19-01-31-img/sdc2.vfat-ptcl-img.lzo. 2> /tmp/split_error.zueCoP
Partclone v0.3.12 http://partclone.org
Starting to clone device (/dev/sdc2) to image (-)
Reading Super Block
memory needed: 21102596 bytes
bitmap 131072 bytes, blocks 2*10485760 bytes, checksum 4 bytes
Calculating bitmap... Please wait... 
done!
File system:  FAT32
Device size:  536.9 MB = 1048576 Blocks
Space in use:   1.3 MB = 2544 Blocks
Free Space:   535.6 MB = 1046032 Blocks
Block size:   512 Byte
Total block 1048576
Syncing... OK!
Partclone successfully cloned the device (/dev/sdc2) to the image (-)
>>> Time elapsed: 7.19 secs (~ .119 mins)
*****************************************************.
Finished saving /dev/sdc2 as /home/partimag/19-01-31-img/sdc2.vfat-ptcl-img.lzo
*****************************************************.
Starting saving /dev/sdc3 as /home/partimag/19-01-31-img/sdc3.XXX...
/dev/sdc3 filesystem: crypto_LUKS.
*****************************************************.
*****************************************************.
Use partclone with lzop to save the image.
Image file will be split with size limit 30720 MB.
*****************************************************.
If this action fails or hangs, check:
* Is the disk full ?
*****************************************************.
Run partclone: partclone.dd -z 10485760 -N -L /var/log/partclone.log -s /dev/sdc3 --output - | lzop -c -3 | split -a 2 -b 30720MB - /home/partimag/19-01-31-img/sdc3.dd-ptcl-img.lzo. 2> /tmp/split_error.fyK5wH
Partclone v0.3.12 http://partclone.org
Starting to clone/restore (/dev/sdc3) to (-) with dd mode
get device size 31498174464 by ioctl BLKGETSIZE64,
memory needed: 28661504 bytes
bitmap 7689984 bytes, blocks 2*10485760 bytes, checksum 0 bytes
Calculating bitmap... Please wait... done!
File system:  raw
Device size:   31.5 GB = 61519872 Blocks
Space in use:  31.5 GB = 61519872 Blocks
Free Space:     0 Byte = 0 Blocks
Block size:   512 Byte
Total block 61519872
Syncing... OK!
>>> Time elapsed: 498.82 secs (~ 8.313 mins)
*****************************************************.
Finished saving /dev/sdc3 as /home/partimag/19-01-31-img/sdc3.dd-ptcl-img.lzo
*****************************************************.
End of saveparts job for image /home/partimag/19-01-31-img.
*****************************************************.
*****************************************************.
End of savedisk job for image 19-01-31-img.
GPT 1st partition table file found!
GPT 2nd partition table file found!
GPT partition table file for this disk saved by gdisk was found: sdc
MBR file for this disk was found: sdc
Image was saved by dd or partclone.dd. No need or no way to check the file system integrity: sdc1
?[1;33mObraz tejto partície je obnoviteľný: sdc1
?[0;39m?[1;33mObraz tejto partície je obnoviteľný: sdc2
?[0;39mImage was saved by dd or partclone.dd. No need or no way to check the file system integrity: sdc3
?[1;33mObraz tejto partície je obnoviteľný: sdc3
?[0;39m?[1;33mVšertky obrazy partícií alebo LV diskov v tomto obraze boli skontrolované a sú obnoviteľné: 19-01-31-img
?[0;39mChecking if udevd rules have to be restored...
This program is not started by Clonezilla server, so skip notifying it the job is done.
This program is not started by Clonezilla server, so skip notifying it the job is done.
Finished!
Finished!
### End of log ###
### Image created time: 2019-0131-1045

Může se hash změnit změnou vlastníka a práv?

Pokud bys chtěl pomoci, rád dodám cokoliv, co budeš chtít.