Administrace komentářů

# 2023-08-16 12:10:25 by RouterOS 7.11
# software id = GA2P-451I
#
# model = RB3011UiAS
/interface bridge
add admin-mac=78:9A:18:19:04:BD auto-mac=no name=bridge protocol-mode=none
/interface ethernet
set [ find default-name=ether10 ] name=ether10-service
/interface eoip
add mac-address=02:11:8E:E5:5E:4F name=eoip-tunnel1 remote-address=\
    172.16.20.2 tunnel-id=100
/interface vlan
add interface=bridge name=vlan10 vlan-id=10
add interface=bridge name=vlan100 vlan-id=100
add interface=bridge name=vlan110 vlan-id=110
/interface ethernet switch port
set 1 vlan-header=add-if-missing vlan-mode=secure
set 2 default-vlan-id=10 vlan-header=always-strip vlan-mode=secure
set 3 default-vlan-id=10 vlan-header=always-strip vlan-mode=secure
set 4 default-vlan-id=10 vlan-header=always-strip vlan-mode=secure
set 5 default-vlan-id=10 vlan-header=always-strip vlan-mode=secure
set 6 default-vlan-id=10 vlan-header=always-strip vlan-mode=secure
set 7 default-vlan-id=10 vlan-header=always-strip vlan-mode=secure
set 8 default-vlan-id=10 vlan-header=always-strip vlan-mode=secure
set 10 vlan-mode=secure
set 11 vlan-mode=secure
/interface list
add comment=defconf name=WAN
add comment=defconf name=LAN
/interface lte apn
set [ find default=yes ] ip-type=ipv4 use-network-apn=no
/interface wireless security-profiles
set [ find default=yes ] supplicant-identity=MikroTik
/ip ipsec profile
set [ find default=yes ] enc-algorithm=aes-256,aes-128,3des
/ip pool
add name=dhcp_pool_firma ranges=10.0.1.50-10.0.1.250
add name=dhcp_pool_najemnici ranges=10.0.100.10-10.0.100.250
add name=l2tp-pool ranges=172.16.20.10-172.16.20.250
add name=dhcp_pool_navsteva ranges=10.0.110.10-10.0.110.250
add name=dhcp_pool_service ranges=192.168.88.2-192.168.88.254
/ip dhcp-server
add address-pool=dhcp_pool_firma interface=vlan10 lease-time=10m name=dhcp1
add address-pool=dhcp_pool_najemnici interface=vlan100 lease-time=10m name=\
    dhcp2
add address-pool=dhcp_pool_navsteva interface=vlan110 name=dhcp3
add address-pool=dhcp_pool_service interface=ether10-service name=dhcp4
/port
set 0 name=serial0
/ppp profile
add dns-server=172.16.20.1 local-address=172.16.20.1 name=l2tp-vpn \
    remote-address=l2tp-pool
/routing bgp template
set default disabled=no output.network=bgp-networks
/routing ospf instance
add disabled=no name=default-v2
/routing ospf area
add disabled=yes instance=default-v2 name=backbone-v2
/interface bridge port
add bridge=bridge ingress-filtering=no interface=ether2
add bridge=bridge ingress-filtering=no interface=ether3
add bridge=bridge ingress-filtering=no interface=ether4
add bridge=bridge ingress-filtering=no interface=ether5
add bridge=bridge ingress-filtering=no interface=ether7
add bridge=bridge ingress-filtering=no interface=ether8
add bridge=bridge ingress-filtering=no interface=ether9
add bridge=bridge ingress-filtering=no interface=eoip-tunnel1
add bridge=bridge ingress-filtering=no interface=ether6
add bridge=bridge interface=sfp1
/ip neighbor discovery-settings
set discover-interface-list=LAN
/ip settings
set max-neighbor-entries=8192
/ipv6 settings
set disable-ipv6=yes forward=no max-neighbor-entries=8192
/interface ethernet switch vlan
add independent-learning=no ports=ether6,ether7,ether8,ether9,switch2-cpu \
    switch=switch2 vlan-id=10
add independent-learning=no ports=ether2,switch1-cpu switch=switch1 vlan-id=\
    100
add independent-learning=no ports=ether2,switch1-cpu switch=switch1 vlan-id=\
    110
add independent-learning=no ports=ether2,ether3,ether4,ether5,switch1-cpu \
    switch=switch1 vlan-id=10
add independent-learning=no ports=ether2 switch=switch1 vlan-id=1
/interface l2tp-server server
set default-profile=l2tp-vpn enabled=yes use-ipsec=required
/interface list member
add comment=defconf interface=bridge list=LAN
add comment=defconf interface=ether1 list=WAN
/interface ovpn-server server
set auth=sha1,md5
/interface sstp-server server
set default-profile=default-encryption enabled=yes
/ip address
add address=10.0.1.1/24 interface=vlan10 network=10.0.1.0
add address=192.168.1.201/24 interface=ether1 network=192.168.1.0
add address=10.0.100.1/24 interface=vlan100 network=10.0.100.0
add address=10.0.50.1/24 interface=eoip-tunnel1 network=10.0.50.0
add address=10.0.110.1/24 interface=vlan110 network=10.0.110.0
add address=192.168.88.1/24 interface=ether10-service network=192.168.88.0
/ip dhcp-server network
add address=10.0.1.0/24 dns-server=10.0.1.1 domain=tis gateway=10.0.1.1 \
    netmask=24
add address=10.0.100.0/24 dns-server=10.0.100.1 gateway=10.0.100.1
add address=10.0.110.0/24 dns-server=10.0.110.1 gateway=10.0.110.1 netmask=24
add address=192.168.88.0/24 gateway=192.168.88.1
/ip dns
set allow-remote-requests=yes max-concurrent-queries=500 \
    max-concurrent-tcp-sessions=100 servers=8.8.8.8
/ip dns static
add disabled=yes forward-to=10.0.2.1 regexp=".*\\.brn" type=FWD
add address=10.0.1.2 disabled=yes name=switch1.tis
add address=10.0.1.1 name=gw.tis
add address=10.0.1.3 disabled=yes name=wifi1.tis
/ip firewall filter
add action=fasttrack-connection chain=forward comment=\
    "Povolit rychle odbaveni navazaneho spojeni FORWARD" connection-state=\
    established,related hw-offload=yes
add action=accept chain=forward comment="Povolit navazana spojeni na FORWARD" \
    connection-state=established,related
add action=accept chain=input comment="Povolit navazana spojeni na INPUT" \
    connection-state=established,related,untracked
add action=accept chain=input comment="Povolit ICMP" protocol=icmp
add action=accept chain=input comment="Allow L2PT / IPSec VPN access" \
    dst-port=500,1701,4500 in-interface-list=WAN protocol=udp
add action=accept chain=input in-interface-list=WAN protocol=ipsec-ah
add action=accept chain=input in-interface-list=WAN protocol=ipsec-esp
add action=accept chain=forward dst-address-list=Firma src-address-list=Firma
/ip firewall nat
add action=masquerade chain=srcnat out-interface-list=WAN
/ip route
add disabled=no dst-address=0.0.0.0/0 gateway=192.168.1.1
add disabled=no dst-address=10.0.2.0/24 gateway=10.0.50.2
/lcd
set backlight-timeout=never default-screen=stats
/ppp secret
add name=test-user profile=l2tp-vpn
add name=MikrotikBrn profile=l2tp-vpn remote-address=172.16.20.2
/routing bfd configuration
add disabled=no interfaces=all min-rx=200us min-tx=200us multiplier=5
/system clock
set time-zone-name=Europe/Prague
/system identity
set name=RouterOS
/system note
set show-at-login=no
/system ntp client
set mode=broadcast
/tool mac-server
set allowed-interface-list=LAN
/tool mac-server mac-winbox
set allowed-interface-list=LAN
/tool sniffer
set filter-port=dns