Administrace komentářů

V pouziti Radeonu pod Slackware je pekny chaos. Kazdy radi neco jineho. Na internetu jsem nasel ATI Linux How-To - http://www.rage3d.com/content/articles/atilinuxhowto/Linux_ATI.html kde je napsano: 5 Installing ATI drivers on a Slackware Machine 5.1 Where to get the driver The newest drivers can always be found at http://www.ati.com/support/driver.html. 5.2 Steps to take before installing the drivers There are some things, that need to be activated in the kernel, in order to get the drivers working. cd /usr/src/linux make menuconfig You will be greeted by a menu, in which you can add/remove things that are incorporated into the kernel, you can select what modules to have build and so on. The important stuff to add here is: /dev/agpgart under ``character devices'' MTRR (Memory Type Range Register) under ``processor type and features'' and to disable: Direct Rendering Manager (XFree86 DRI support) under ``character devices'' If you don't enable the first, you won't be able to configure the driver and if you don't disable the second, the Xfree86 drivers will be conflicting with your ATI driver. 5.3 Installing the driver First of all, you have to convert the RPM from www.ati.com to a format Slackware understands. This can be done with the utility rpm2targz (in debian you can get it with the help of apt-get). rpm2targz DRIVER_FILE_NAME.rpm Now you have to extract the archive: tar xvzf DRIVER_FILE_NAME.tar.gz This will create a folder with all the files neatly inside it. Change directory to it: cd DRIVER_FILE_NAME (From here on you have to be root to continue) su Once inside the driver directory copy all of it's contents to / (yes root): cp -r * / Once this is finished you will have to build the kernel module. Info on how to do this can be found in the Common steps part later in this HowTo. After that it is just a matter of running fglrxconfig to set up X Windows. Info on how to do it can also be found in the Common steps part. ******************************************************* A ja jsem z toho uz tak domotany,ze potrebuji poradit co presne tady pisou (neumim moc anglicky) - Slackware 9.1, kernel 2.4.23 1 - /dev/agpgart under ``character devices'' ma byt zapnute/vypnute, nebo jako modul? 2 - MTRR (Memory Type Range Register) under ``processor type and features' jde jen zapnout, nebo vypnout - jak ma byt? 3 - Direct Rendering Manager (XFree86 DRI support) under ``character devices'' - jsem pochopil, ze ma byt vypnuty Diky