Administrace komentářů

/dev/hdb5 / ext3 defaults 1 1
/dev/hdb8 /data ext3 defaults 1 2
none /dev/pts devpts mode=0620 0 0
/dev/hdb7 /home ext3 defaults 1 2
none /mnt/cdrom supermount dev=/dev/scd0,fs=auto,ro,--,iocharset=iso8859-1,codepage=850,umask=0 0 0
none /mnt/floppy supermount dev=/dev/fd0,fs=auto,--,iocharset=iso8859-1,sync,codepage=850,umask=0 0 0
/dev/hdb1 /mnt/windows vfat iocharset=iso8859-1,codepage=850,umask=0 0 0
none /proc proc defaults 0 0
/dev/hdb6 swap swap defaults 0 0
usbfs /proc/bus/usb usbfs defaults 0 0
/dev/sda1 /mnt/usb vfat noauto,user 0 0

[root@localhost /]# dmesg | grep sda
Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0
SCSI device sda: 507904 512-byte hdwr sectors (260 MB)
sda: Write Protect is off

Disk /dev/sda: 260 MB, 260046848 bytes
32 heads, 32 sectors/track, 496 cylinders
Units = cylinders of 1024 * 512 = 524288 bytes

   Device Boot    Start       End    Blocks   Id  System
/dev/sda1   *         1       496    253936    b  Win95 FAT32

[root@localhost /]# mkdosfs -F 32 /dev/sda1
mkdosfs 2.8 (28 Feb 2001)
mkdosfs: unable to open /dev/sda1

co s tym safra je ??? nechapem ako sa mi podarilo ani uz neviem co som porobil, ze vcera po x-pokusoch nabehol ako sda4 a normalne fungoval.
nemoze mat cely tento problem nieco spolocne s touto diskusiou ? pridaval som USB radic...
asi to bude blbost, ale nemoze to mat nieco spolocne napriklad s emulaciou scsi na hdc ? (vypalovacka, hdc=ide-scsi). len tak sa pytam, ked ho povazuje za SCSI device... ale ta emulacia sa tyka iba hdc, ze ?

btw: ked nabootujem slax (4.2.0) alebo knoppix (3.4) tak to normalne funguje - namountujem mount /dev/sda1 /folder a som na disku.

dakujem