Administrace komentářů

auto eth0

mapping eth0
        script /etc/network/mapping
        map home        eth0-home
#       map michal      eth0-michal
        map dhcp        eth0-dhcp

# doma
iface eth0-home inet static
        pre-up cp -f /etc/network/resolv.conf.mistral /etc/resolv.conf
        address 192.168.4.82
        netmask 255.255.255.0
        gateway 192.168.4.81
        up      route add -net 192.168.0.0/16 gw 192.168.4.250 eth0
        down    route del -net 192.168.0.0/16 gw 192.168.4.250 eth0

## u michala
#iface eth0-michal inet static
#       address 192.168.3.2
#       netmask 255.255.255.0
#       gateway 192.168.3.13

# dhcp
iface eth0-dhcp inet dhcp

#!/bin/bash

dir=/etc/network

case $1 in
eth0)
        preset_map=$dir/map.eth0
        ;;
wlan0)
        preset_map=$dir/map.wlan0
        ;;
esac


iface="$1"
which=""

while read map device
do
        # pokud zarizeni jiz zname, tak uz dal nehledame, jen budeme cist stdin
        if [ "$which" ]
        then
                continue
        fi
        
        # koukneme, jestli zarizeni odpovida predvolbe
        if [ "`grep -e "$map" $preset_map`" == "$map" ]
        then
                wich=$device
        fi
done

echo $wich

$ ll /etc/network/map*
-rw-rw-r--  1 root ifaces 5 2005-03-23 18:12 /etc/network/map.eth0
-rwxr-xr-x  1 root root   422 2004-11-07 21:52 /etc/network/mapping
-rw-rw-r--  1 root ifaces 7 2005-03-29 13:33 /etc/network/map.wlan0