Administrace komentářů

root@ubuntu:/home/bubu # dmesg established 32768 bind 65536) NET: Registered protocol family 8 NET: Registered protocol family 20 Restarting tasks...<6> Strange, kswapd0 not stopped Strange, kseriod not stopped done ACPI wakeup devices: PCI0 PCI1 PS2K PS2M USB0 USB3 USB1 USB2 AC97 ACPI: (supports S0 S1 S3 S4 S5) RAMDISK: cramfs filesystem found at block 0 RAMDISK: Loading 4256KiB [1 disk] into ram disk... done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 224k freed vesafb: framebuffer at 0xf0000000, mapped to 0xde880000, using 3072k, total 32768k vesafb: mode is 1024x768x16, linelength=2048, pages=4 vesafb: protected mode interface info at cb18:0004 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 fb0: VESA VGA frame buffer device Console: switching to colour frame buffer device 128x48 NET: Registered protocol family 1 Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SIS5513: IDE controller at PCI slot 0000:00:02.5 ACPI: PCI interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16 SIS5513: chipset revision 0 SIS5513: not 100% native mode: will probe irqs later SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: WDC WD800JB-00JJA0, ATA DISK drive elevator: using anticipatory as default io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 p8 > Probing IDE interface ide1... hdc: HL-DT-ST DVDRAM GSA-4120B, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... Probing IDE interface ide3... Probing IDE interface ide4... Probing IDE interface ide5... Stopping tasks: ==| Freeing memory... done (456 pages freed) Restarting tasks... done ReiserFS: hda7: found reiserfs format "3.6" with standard journal ReiserFS: hda7: using ordered data mode ReiserFS: hda7: journal params: device hda7, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30 ReiserFS: hda7: checking transaction log (hda7) ReiserFS: hda7: Using r5 hash to sort names Adding 1052216k swap on /dev/hda8. Priority:-1 extents:1 hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache Uniform CD-ROM driver Revision: 3.20 parport: PnPBIOS parport detected. parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA] lp0: using parport0 (interrupt-driven). mice: PS/2 mouse device common for all mice input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 Capability LSM initialized ts: Compaq touchscreen protocol output device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27 cdrom: open failed. NTFS driver 2.1.22 [Flags: R/O MODULE]. NTFS volume version 3.1. Real Time Clock Driver v1.12 input: PC Speaker inserting floppy driver for 2.6.10-4-386 Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected SiS 651 chipset agpgart: Maximum main memory to use for agp memory: 409M agpgart: AGP aperture is 64M @ 0xe8000000 cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 i2c-sis96x version 1.0.0 sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0xe600 ACPI: PCI interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 18 intel8x0_measure_ac97_clock: measured 49684 usecs intel8x0: clocking to 48000 usbcore: registered new driver usbfs usbcore: registered new driver hub ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ACPI: PCI interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 20 ohci_hcd 0000:00:03.0: Silicon Integrated Systems [SiS] USB 1.0 Controller ohci_hcd 0000:00:03.0: irq 20, pci mem 0xe7000000 ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected ACPI: PCI interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 21 ohci_hcd 0000:00:03.1: Silicon Integrated Systems [SiS] USB 1.0 Controller (#2) ohci_hcd 0000:00:03.1: irq 21, pci mem 0xe6800000 ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected usb 1-1: new full speed USB device using ohci_hcd and address 2 ACPI: PCI interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 23 ehci_hcd 0000:00:03.3: Silicon Integrated Systems [SiS] USB 2.0 Controller ehci_hcd 0000:00:03.3: irq 23, pci mem 0xe6000000 ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 3 PCI: cache line size of 128 is not supported by device 0000:00:03.3 ehci_hcd 0000:00:03.3: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 3-0:1.0: USB hub found hub 3-0:1.0: 6 ports detected drivers/usb/class/usblp.c: can't set desired altsetting 0 on interface 0 usblp: probe of 1-1:1.0 failed with error -5 usbcore: registered new driver usblp drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver usb 1-1: USB disconnect, address 2 sis900.c: v1.08.07 11/02/2003 ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 19 eth0: Realtek RTL8201 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0x8800, IRQ 19, 00:0c:6e:35:e9:c9. usb 1-1: new full speed USB device using ohci_hcd and address 3 Linux video capture interface: v1.00 drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x04A9 pid 0x106A saa7130/34: v4l2 driver version 0.2.12 loaded ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 19 (level, low) -> IRQ 19 saa7133[0]: found at 0000:00:10.0, rev: 240, irq: 19, latency: 32, mmio: 0xe5000000 saa7133[0]: subsystem: 1043:4845, board: UNKNOWN/GENERIC [card=0,autodetected] saa7133[0]: board init: gpio is 0 saa7133[0]: dsp access wait timeout [bit=WRR] saa7133[0]: dsp access wait timeout [bit=WRR] saa7133[0]: i2c eeprom 00: 43 10 45 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 saa7133[0]: i2c eeprom 10: 00 ff e2 0f ff 20 ff ff ff ff ff ff ff ff ff ff saa7133[0]: i2c eeprom 20: 01 40 01 02 03 01 01 04 08 ff 00 89 ff ff ff ff saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff saa7133[0]: registered device video0 [v4l2] saa7133[0]: registered device vbi0 eth0: Media Link On 100mbps full-duplex NET: Registered protocol family 10 Disabled Privacy Extensions on device c02ef500(lo) IPv6 over IPv4 tunneling driver ACPI: Power Button (FF) [PWRF] ibm_acpi: ec object not found apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) apm: overridden by ACPI. ip_tables: (C) 2000-2002 Netfilter core team ip_conntrack version 2.1 (3839 buckets, 30712 max) - 336 bytes per conntrack eth0: no IPv6 routers present