Dotaz: modprobe aha1542 - device not found

[ajikdpoe]

Ahoj.

Mam taky problem. Mam nainstalovany RedHat 7.2 a Fedora Core 4, mam scsi adapter Adaptec AHA-1542 C, v RH72 ked napisem:

# modprobe aha1542
# cat /proc/scsi/scsi
... vypise moj skener, vsetko je ok

Ked to iste spravim v FC4 tak napise:

# modprobe aha1542
FATAL: Error inserting aha1542 (cesta k modulu.../aha1542.ko): No such device
# cat /proc/scsi/scsi
... nic

Kernel v FC4 je 2.6.9, je tam udev, v logoch nieje ziadna chyba, len z SCSI subsystem initialized (asi scsi_mod)

Neviete v com je problem? Este dodam ze chcem ten scsi adapter rozchodit pod FC4. Vdaka

Odpovědi

[Sir Mikhail]

Jsem na tom stejně a taky nevím co s tím ....

[root@server uzivatel]# modprobe aha1542 FATAL: Error inserting aha1542 (/lib/modules/2.6.23-ARCH/kernel/drivers/scsi/aha1542.ko): No such device

[root@server uzivatel]# dmesg Configuring Adaptec (SCSI-ID 7) at IO:330, IRQ 11, DMA priority 5 Unable to allocate IRQ for adaptec controller.

[ajikdpoe]

pohraj sa z biosom toho radica, + spravne nastav piano:

io port musi byt 330 alebo 334 (ine linuxovy driver nepodporuje) takze sw2,3,4 musi byt open open open

proste sa s tym treba pohrat, aj v biose je milion nastaveni

ja som pouzival taketo nastavenie:

adresa 330h pamat DC0000h irq 11 dma5 scsi id7

zariadeniu som nastavi id 1 (s nulou to nefungovalo)

este je na nom poistka, skontroluj ci je dobra

a este poskusaj roxne moduly natiahnut, scsi_mod, sg(_mod) ?

[Sir Mikhail]

Díky za odpověď. Jakým příkazem jsi pak tu kartu přidával? Mám na mysli

modprobe aha1542 + jaké parametry?

Klavír i firmware mam nastaveno stejně jako máš ty ...

[Sir Mikhail]

[root@server uzivatel]# modprobe aha1542
FATAL: Error inserting aha1542 (/lib/modules/2.6.23-ARCH/kernel/drivers/scsi/aha1542.ko): No such device
[root@server uzivatel]# dmesg
Configuring Adaptec (SCSI-ID 7) at IO:330, IRQ 11, DMA priority 5
Unable to allocate IRQ for adaptec controller.

Nevim jestli by mi pomohlo vlozit modul SCSI_MOD ale nějak ho nemůžu zprovoznit

[root@server uzivatel]# locate scsi_mod
/sys/module/scsi_mod
/sys/module/scsi_mod/parameters
/sys/module/scsi_mod/parameters/default_dev_flags
/sys/module/scsi_mod/parameters/max_luns
/sys/module/scsi_mod/parameters/scan
/sys/module/scsi_mod/parameters/max_report_luns
/sys/module/scsi_mod/parameters/inq_timeout
/sys/module/scsi_mod/parameters/scsi_logging_level
[root@server uzivatel]# modprobe scsi_mod
FATAL: Module scsi_mod not found.

[Sir Mikhail]

Zmenil jsem v BIOSu karty IRQ 11 ktery hazelo chybu UNABLE TO ALLOCATE IRQ na 10 ... a vysledek

[root@server uzivatel]# modprobe aha1542 aha1542=0x330

je dmesg:

Configuring Adaptec (SCSI-ID 7) at IO:330, IRQ 10, DMA priority 5
scsi0 : Adaptec 1542
isa bounce pool size: 16 pages
scsi 0:0:0:0: Trying device reset for target
scsi 0:0:0:0: Trying device reset for target
Clocksource tsc unstable (delta = 4686099070 ns)
Time: acpi_pm clocksource has been installed.
Sent BUS RESET to scsi host 0
scsi 0:0:0:0: Trying device reset for target
scsi 0:0:0:0: scsi: Device offlined - not ready after error recovery
scsi 0:0:1:0: Trying device reset for target
scsi 0:0:1:0: Trying device reset for target
Sent BUS RESET to scsi host 0
scsi 0:0:1:0: Trying device reset for target
scsi 0:0:1:0: scsi: Device offlined - not ready after error recovery
scsi 0:0:2:0: Trying device reset for target
scsi 0:0:2:0: Trying device reset for target
Sent BUS RESET to scsi host 0
scsi 0:0:2:0: Trying device reset for target
scsi 0:0:2:0: scsi: Device offlined - not ready after error recovery
scsi 0:0:3:0: Trying device reset for target
scsi 0:0:3:0: Trying device reset for target
Sent BUS RESET to scsi host 0
scsi 0:0:3:0: Trying device reset for target
scsi 0:0:3:0: scsi: Device offlined - not ready after error recovery
scsi 0:0:4:0: Trying device reset for target
scsi 0:0:4:0: Trying device reset for target
Sent BUS RESET to scsi host 0
scsi 0:0:4:0: Trying device reset for target
scsi 0:0:4:0: scsi: Device offlined - not ready after error recovery
scsi 0:0:5:0: Trying device reset for target
scsi 0:0:5:0: Trying device reset for target
Sent BUS RESET to scsi host 0
scsi 0:0:5:0: Trying device reset for target
scsi 0:0:5:0: scsi: Device offlined - not ready after error recovery
scsi 0:0:6:0: Trying device reset for target
scsi 0:0:6:0: Trying device reset for target
Sent BUS RESET to scsi host 0
scsi 0:0:6:0: Trying device reset for target
scsi 0:0:6:0: scsi: Device offlined - not ready after error recovery

[ajikdpoe]

a este som zabudol dodat ze ked sa mi to stalo naposledy, tak som spustil mem test v biose toho radica a v polovici vzdy zamrzne takze je asi poskodena pamat, odvtedy mi nefunguje

[jm]

Tak si porid funkcni radic a neptej se, proc jadro nenajde ten, kterej je rozbitej.

[Sir Mikhail]

Ten thread je docela starej, cca rok a půl ... autor to puvodne vyresil a az potom se mu ten adapter rozbil. Diskuze bezi pac ten samej typ mam ja a jen me upozornoval co se mu stalo.

Mozna by to chtelo precist i vic nez jen posledni hlasku ... :)

[Sir Mikhail]

Jaky to hlasilo chyby?

[ajikdpoe]

ziadne, proste to v polovicke toho memtestu zamrzne