Dotaz: WinTV-HVR-900

[Sajmon]

Zdravim Nedavno som si kupil tuner WinTV-HVR-900 a pokusal som sa ho rozchodit na ubuntu gusty podla tohoto navodu. Je tam link odkazujuci sa na dalsiu stranku s driverom a jak ho spravne nainstalovat.

Instalacia prebehla ok analogova telka mi ide ale digitalne vysielanie dako nevie prijat. Pozeral som vystup po dmesg a sa mi zda ze tam vobec nic nieje o dakom dvb-t zariadeni co som si vsimol ze by malo byt podla vypisu vo vyssie zmeinenom odkaze.

U mna to vyzera asi takto:

[  578.352000] usb 6-3: new high speed USB device using ehci_hcd and address 6
[  578.488000] usb 6-3: configuration #1 chosen from 1 choice
[  578.488000] em28xx new video device (2040:6502): interface 0, class 255
[  578.488000] em28xx: device is attached to a USB 2.0 bus
[  578.488000] em28xx: you're using the experimental/unstable tree from mcentral.de
[  578.488000] em28xx: there's also a stable tree available but which is limited to
[  578.488000] em28xx: linux <=2.6.19.2
[  578.488000] em28xx: it's fine to use this driver but keep in mind that it will move
[  578.488000] em28xx: to http://mcentral.de/hg/~mrec/v4l-dvb-kernel as soon as it's
[  578.488000] em28xx: proved to be stable
[  578.488000] em28xx #0: Alternate settings: 8
[  578.488000] em28xx #0: Alternate setting 0, max size= 0
[  578.488000] em28xx #0: Alternate setting 1, max size= 0
[  578.488000] em28xx #0: Alternate setting 2, max size= 1448
[  578.488000] em28xx #0: Alternate setting 3, max size= 2048
[  578.488000] em28xx #0: Alternate setting 4, max size= 2304
[  578.488000] em28xx #0: Alternate setting 5, max size= 2580
[  578.488000] em28xx #0: Alternate setting 6, max size= 2892
[  578.488000] em28xx #0: Alternate setting 7, max size= 3072
[  578.864000] attach_inform: eeprom detected.
[  578.892000] em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18
[  578.892000] em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00
[  578.892000] em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00
[  578.892000] em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00
[  578.892000] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  578.892000] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[  578.892000] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00
[  578.892000] em28xx #0: i2c eeprom 70: 32 00 37 00 36 00 32 00 38 00 33 00 31 00 38 00
[  578.892000] em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00
[  578.892000] em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00
[  578.892000] em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89
[  578.892000] em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1e bb
[  578.892000] em28xx #0: i2c eeprom c0: 10 f0 74 02 01 00 01 79 61 00 00 00 00 00 00 00
[  578.892000] em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89
[  578.892000] em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 1e bb
[  578.892000] em28xx #0: i2c eeprom f0: 10 f0 74 02 01 00 01 79 61 00 00 00 00 00 00 00
[  578.892000] EEPROM ID= 0x9567eb1a
[  578.892000] Vendor/Product ID= 2040:6502
[  578.892000] AC97 audio (5 sample rates)
[  578.892000] 500mA max power
[  578.892000] Table at 0x24, strings=0x1e82, 0x186a, 0x0000
[  578.892000] tveeprom 0-0050: Hauppauge model 65018, rev B2C0, serial# 1096478
[  578.892000] tveeprom 0-0050: tuner model is Xceive XC3028 (idx 120, type 71)
[  578.892000] tveeprom 0-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4)
[  578.892000] tveeprom 0-0050: audio processor is None (idx 0)
[  578.892000] tveeprom 0-0050: has radio
[  578.892000] setting new tuner type now 71!
[  578.896000] tuner 0-0061: chip found @ 0xc2 (em28xx #0)
[  578.896000] attach inform (default): detected I2C address c2
[  578.896000] /home/sajmon/driver/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback
[  578.896000] tuner 0x61: Configuration acknowledged
[  578.896000] /home/sajmon/driver/v4l-dvb-experimental/v4l/tuner-core.c: setting tuner callback
[  578.896000] /home/sajmon/driver/v4l-dvb-experimental/v4l/xc3028-tuner.c: attach request!
[  578.896000] /home/sajmon/driver/v4l-dvb-experimental/v4l/tuner-core.c: xc3028 tuner successfully loaded
[  578.904000] attach_inform: tvp5150 detected.
[  578.968000] tvp5150 0-005c: tvp5150am1 detected.
[  579.068000] Loading base firmware: xc3028_init0.i2c.fw
[  580.252000] Loading default analogue TV settings: xc3028_BG_PAL_A2_A.i2c.fw
[  580.280000] xc3028-tuner.c: firmware 2.7
[  580.280000] ANALOG TV REQUEST
[  580.284000] em28xx #0: V4L2 VBI device registered as /dev/vbi0
[  580.284000] em28xx #0: V4L2 device registered as /dev/video0
[  580.284000] em28xx-audio.c: probing for em28x1 non standard usbaudio
[  580.284000] em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
[  580.288000] em28xx #0: Found Hauppauge WinTV HVR Rev. 1.2

sa mi tak vidi ze tamnikde neni ani zmienka o driery em2880-dvb ktory by mal spojazdnit dvb tuner ale preco ho tam nevidim to neviem lebo som nahodil jak modul em28xx tak aj em2880-dvb. tak neviem. nieosm v tom moc zbehly tak mozno som dade daco prehliadol... skuste poradit co s tym prosim.

Odpovědi

[Jiri Pittner]

Bohuzel toto zarizeni ma pod jedinym jmenem dve verze a k te novejsi (usb :6502) jeste dvb-t driver neni. Viz em2880-dvb.c z experimental repository. Vyrobce, co delaji pod jednim obchodnim jmenem nekompatibilni hardwary bych strilel...