Dotaz: TechniSat a Lirc

[ziki18]

Ahojte. Mam debian 4.0. Dostal sa mi do ruky ovladac TechniSat TTS35AI a aj s modulom do serial portu. Rozbalil som to. Nainstaloval som Lirc. A programy okolo serial portu. setserial.... Config pre ovladac som nasiel v balicku remotes.Takze som to nahral do /etc/lirc/lircd.conf. Restartnem daemona lircd. A Nic sa nedeje.

Odpovědi

[Karel Borkovec]

Tenhle ovladač funguje s LIRCem bez problémů, máš správně nainstalovaný LIRC a zavedené potřebné moduly? Je příkaz, tuším irw, který spustíš a mačkáš tlačítka a hned vidiš, jestli komunikují nebo ne...

[ziki18]

Lirc som instalovat apt-get install lirc.

lsmod | grep lirc
lirc_dev 14004 0

Uz sa s tym hram dost dlho ale stale nic. irw nic nespravi..

[ziki18]

Taaakze :

HTPC:~# irrecord -d /dev/lirc0 TTS35AI

irrecord -  application for recording IR-codes for usage with lirc

Copyright (C) 1998,1999 Christoph Bartelmus(lirc@bartelmus.de)

irrecord: could not get file information for /dev/lirc0
irrecord: default_init(): No such file or directory
irrecord: could not init hardware (lircd running ? --> close it, check permissions)
HTPC:~#

Neviem ci sa mi oplati preinstalovat system kvoli takej somarine. V /dev/ nie je zariadenie lirc. A ani nic podobne.

[Karel Borkovec]

Tady je návod...

[Karel Borkovec]

Jak říkám, nemáš zaveden modul, který potřebuješ. Program irrrecord slouží k něčemu jinému, ty ho nepotřebuješ (viz manuál)...

[Karel Borkovec]

Nemáš ani zavedený modul lirc_serial... Najdi si na netu nějaký návod, je jich spoustu, zkus to podle něj a pak kdyžtak sem hoď konkrétní problém...

[DNA]

v lirc je bug a nelze ho kompilovat na jádrech >=2.6.23

zrovna jsem měnil jádro a taky mi to nešlo, tak jsem vygooglil TOTO a několik dalších reportů s odkazem na patch (bohužel patch neumím aplikovat, tak to teď zkouším z CVS verze lirc(mělo by to tam být opraveno)), jestli se to podaří, tak postup instalace přepíšu sem...

Používám Debian Sid s jádrem 2.6.24

[DNA]

tak zatím jsem uspěl jen s kompilací lirc_dev po aplikaci jednoho patche na verzi 0.8.3.pre1. Bohužel problém je i v modulu lirc_serial a zde jsem našel patch na verzi 0.8.2 pro oba soubory, ale je chybný... Verze z CVS taktéž neprošla, takže co se týká mě, budu muset ještě počkat (downgrade jádra nepřichází v úvahu, všechno ostatní funguje jak má...). No, alespoň jsem se naučil patchovat zdrojáky :)

[ziki18]

Skusal som nahodit mythbuntu. A postupoval som podla : mythtv Zasekol som sa pri :

root@htpc:/home/marek# irrecord -d /dev/lirc0 TTS35AI

irrecord -  application for recording IR-codes for usage with lirc

Copyright (C) 1998,1999 Christoph Bartelmus(lirc@bartelmus.de)

irrecord: could not get file information for /dev/lirc0
irrecord: default_init(): No such file or directory
irrecord: could not init hardware (lircd running ? --> close it, check permissions)
root@htpc:/home/marek#

Natiahol som moduly:

root@htpc:/home/marek# lsmod | grep lirc                                        lirc_i2c               11268  0
lirc_dev               15860  1 lirc_i2c
i2c_core               26112  8 cx88xx,ivtv,bttv,i2c_algo_bit,tveeprom,lirc_i2c,nvidia,i2c_viapro
root@htpc:/home/marek

Jadro je verzie :

root@htpc:/home/marek# uname -r
2.6.22-14-generic
root@htpc:/home/marek#

[ziki18]

A pri zavedeni modulu lirc_serial :

root@htpc:/home/marek# modprobe lirc_serial
FATAL: Error inserting lirc_serial (/lib/modules/2.6.22-14-generic/ubuntu/media/lirc/lirc_serial/lirc_serial.ko): Device or resource busy
root@htpc:/home/marek#

[DNA]

před zavedením lirc_serial jsem vždycky musel zapnout port: setserial /dev/ttySX uart none

snad to pomůže

[DNA]

jo, za X si dosaď 0 nebo 1 podle portu kde máš receiver

[ziki18]

Ahojte. Postupoval som podla vyssie spomenuteho navodu LIRC Dal som

htpc@htpc:~$ sudo setserial /dev/ttyS0 uart none
[sudo] password for htpc:
htpc@htpc:~$ sudo modprobe lirc_serial
htpc@htpc:~$ 

Ale nevytvorilo sa mi zariadenie /dev/lirc ale

htpc@htpc:~$ ls /dev/ |grep lirc
lirc0

Taksom pouzil lirc0. Mode2 vypisuje. Tak je vsetko v poriadku. Ale v mythbuntu to stale nechce ist. Je nieco spatne?

[ziki18]

A este som postupoval podla : MythTV Tak som to skombinoval. Mode2 ukazuje pri stisknuti tlacitka na ovladaci reakciu. Ale mythtv nic nejde ovladat zatim. Ale v /etc/lirc/lircd.conf je TTS35AI a v /etc/lirc/hardware.conf je hardware

[DNA]

zkus jestli ti nepomůže symlink ln -s /dev/lirc0 /dev/lirc

pokud ti mode2 vrací reakci, tak máš vyhráno... Jinak já používám na vše irexec

např.:/home/dan/.lircrc (button je podle lircd.conf)

begin
        prog    =irexec
        button  =mute
        repeat  =0
        config  = amixer set PCM mute
        config  = amixer set PCM unmute
end
begin
        prog    =irexec
        button  =volup
        repeat  =1
        config  = amixer set PCM 1+
end
begin
        prog    =irexec
        button  =1
        repeat  =1
        config  =/home/dan/.irexec/ct1.irc
end

obsah ct1.irc:

#!/bin/sh
killall mplayer &
sleep 1
mplayer -vf lavcdeint -pp 6 -fs "dvb://CT 1" &

vypadá to nešikovně, ale lze tak spouštět funkce programů i přes dcop a pod., vlastně cokoli lze provést z příkazové řádky nebo skriptem (na tlačítku power již nemám vypnutí počítače, zkoušela to každá druhá návštěva :D)...

[ziki18]

Stale mi to neako nejde.

htpc@htpc:~$ irw
0000000000000002 00 Power /etc/lircd.conf
0000000000000002 01 Power /etc/lircd.conf
0000000000000002 02 Power /etc/lircd.conf
0000000000000001 00 Mute /etc/lircd.conf
0000000000000001 01 Mute /etc/lircd.conf
0000000000000001 02 Mute /etc/lircd.conf
0000000000000013 00 Down /etc/lircd.conf
0000000000000013 01 Down /etc/lircd.conf
000000000000001a 00 Vol+ /etc/lircd.conf
000000000000001a 01 Vol+ /etc/lircd.conf
000000000000001a 02 Vol+ /etc/lircd.conf
0000000000000014 00 Left /etc/lircd.conf
0000000000000014 01 Left /etc/lircd.conf
0000000000000014 02 Left /etc/lircd.conf
0000000000000016 00 Ok /etc/lircd.conf
0000000000000016 01 Ok /etc/lircd.conf
0000000000000016 02 Ok /etc/lircd.conf

Neake dalsie vypisy :

cat /home/htpc/.lircrc
begin
    remote = TTS35AI
    prog = mythtv
    button = 7
    config = 7
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = RIGHT
    config = Right
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = MUTE
    config = |
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = 1
    config = 1
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = DOWN
    config = Down
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = 0
    config = 0
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = MENU
    config = M
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = 6
    config = 6
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = 2
    config = 2
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = EXIT
    config = D
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = VOL-
    config = [
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = STOP
    config = Escape
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = VOL+
    config = ]
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = 5
    config = 5
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = INFO
    config = I
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = 4
    config = 4
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = OK
    config = Return
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = UP
    config = Up
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = 9
    config = 9
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = 3
    config = 3
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = 8
    config = 8
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mythtv
    button = LEFT
    config = Left
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mplayer
    button = OK
    config = pause
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mplayer
    button = POWER
    config = quit
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mplayer
    button = MUTE
    config = mute
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mplayer
    button = VOL-
    config = volume -1
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mplayer
    button = STOP
    config = quit
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mplayer
    button = UP
    config = seek +60 0
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mplayer
    button = VOL+
    config = volume +1
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mplayer
    button = DOWN
    config = seek -60 0
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mplayer
    button = RIGHT
    config = seek +6 0
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = mplayer
    button = LEFT
    config = seek -6 0
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = xine
    button = INFO
    config = OSDStreamInfos
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = xine
    button = OK
    config = EventSelect
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = xine
    button = MUTE
    config = Mute
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = xine
    button = VOL-
    config = Volume-
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = xine
    button = STOP
    config = Quit
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = xine
    button = UP
    config = EventUp
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = xine
    button = VOL+
    config = Volume+
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = xine
    button = DOWN
    config = EventDown
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = xine
    button = RIGHT
    config = EventRight
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = xine
    button = LEFT
    config = EventLeft
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = vlc
    button = DOWN
    config = key-nav-down
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = vlc
    button = OK
    config = key-nav-activate
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = vlc
    button = MUTE
    config = key-vol-mute
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = vlc
    button = VOL-
    config = key-vol-down
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = vlc
    button = STOP
    config = key-quit
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = vlc
    button = UP
    config = key-nav-up
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = vlc
    button = VOL+
    config = key-vol-up
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = vlc
    button = RIGHT
    config = key-nav-right
    repeat = 0
    delay = 0
end

begin
    remote = TTS35AI
    prog = vlc
    button = LEFT
    config = key-nav-left
    repeat = 0
    delay = 0
end

A HARDWARE.conf :

htpc@htpc:~$ cat /etc/lirc/hardware.conf
# /etc/lirc/hardware.conf
#
#Chosen Remote Control
REMOTE="Technisat TTS35AI"

# Arguments which will be used when launching lircd
LIRCD_ARGS=""

#Don't start lircmd even if there seems to be a good config file
#START_LIRCMD=false

#Try to load appropriate kernel modules
LOAD_MODULES=true

# Run "lircd --driver=help" for a list of supported drivers.
DRIVER=""
# If DEVICE is set to /dev/lirc and devfs is in use /dev/lirc/0 will be
# automatically used instead
DEVICE="/dev/lirc0"
MODULES="lirc_dev lirc_serial"

# Default configuration files for your hardware if any
LIRCD_CONF="technisat/TTS35AI"
LIRCMD_CONF=""

htpc@htpc:~$

[ziki18]

Perfekt Vsetko ide ako ma. Akurat treba nastavit tlacitka...

[Saljack]

Jestli ti to pomůže tak tady jsem to napsal dost po lopatě ale je to pro Leadtek ty budeš mít akorát změnu se zařízením ale jinak je to to samý

[ziki18]

Jo dik moc. A poradili by ste neaky skriptik. Ktory by pri pri stlaceni tlacitka power vypal PC? nieco ako shutdown -h now

[DNA]

pokud používáš kde, tak je asi nejlepší TOHLE: dcop ksmserver ksmserver logout 0 2 2

[ziki18]

no ahoj..ja pouzivam XFCE..ale dakujem za tip

[DNA]

něco jsem našel přes google: http://www.penguin-soft.com/penguin/man/1/xfce4-shutdown.html

[ziki18]

A este mam jednu otazku. Vsetko ide tlacitka ked sa prehrava film vsetko Ok..ale ked dam prehravat music. Nic nejde. Iba Ok esc a up a down ...hm