abclinuxu.cz AbcLinuxu.cz itbiz.cz ITBiz.cz HDmag.cz HDmag.cz abcprace.cz AbcPráce.cz
AbcLinuxu hledá autory!
Inzerujte na AbcPráce.cz od 950 Kč
Rozšířené hledání
Přihlášení | Registrace
×
napište » Zprávičky
inzerujte » Pracovní nabídky
    Z GNOME Mutter zcela odstraněn backend X11
    dnes 01:00 | Komunita

    Z upstreamu GNOME Mutter byl zcela odstraněn backend X11. GNOME 50 tedy poběží už pouze nad Waylandem. Aplikace pro X11 budou využívat XWayland.

    Ladislav Hagara | Komentářů: 0
    Odstranění XSLT z webových prohlížečů
    dnes 00:00 | IT novinky

    Byl publikován plán na odstranění XSLT z webových prohlížečů Chrome a Chromium. S odstraněním XSLT souhlasí také vývojáři Firefoxu a WebKit. Důvodem jsou bezpečnostní rizika a klesající využití v moderním webovém vývoji.

    Ladislav Hagara | Komentářů: 0
    LXQt 2.3.0
    včera 15:55 | Nová verze

    Desktopové prostředí LXQt (Lightweight Qt Desktop Environment, Wikipedie) vzniklé sloučením projektů Razor-qt a LXDE bylo vydáno ve verzi 2.3.0. Přehled novinek v poznámkách k vydání.

    Ladislav Hagara | Komentářů: 0
    Open Container Initiative Runtime Specification 1.3
    včera 05:55 | IT novinky

    Organizace Open Container Initiative (OCI) (Wikipedie), projekt nadace Linux Foundation, vydala Runtime Specification 1.3 (pdf), tj. novou verzi specifikace kontejnerového běhového prostředí. Hlavní novinkou je podpora FreeBSD.

    Ladislav Hagara | Komentářů: 0
    Turris Omnia NG v prodeji
    4.11. 11:33 | IT novinky

    Nový open source router Turris Omnia NG je v prodeji. Aktuálně na Allegro, Alternetivo, Discomp, i4wifi a WiFiShop.

    Ladislav Hagara | Komentářů: 22
    Sestříhané videozáznamy z konference OpenAlt 2025
    4.11. 05:44 | Komunita

    Na YouTube a nově také na VHSky byly zveřejněny sestříhané videozáznamy přednášek z letošního OpenAltu.

    Ladislav Hagara | Komentářů: 0
    SUSE Open House 2025: přijďte se podívat do kanceláří v pražském Karlíně
    4.11. 04:33 | Komunita

    Jednou za rok otevírá společnost SUSE dveře svých kanceláří široké veřejnosti. Letos je pro vás otevře 26. listopadu v 16 hodin v pražském Karlíně. Vítáni jsou všichni, kdo se chtějí dozvědět více o práci vývojářů, prostředí ve kterém pracují a o místní firemní kultuře. Můžete se těšit na krátké prezentace, které vám přiblíží, na čem inženýři v Praze pracují, jak spolupracují se zákazníky, partnery i studenty, proč mají rádi open source a co

    … více »
    SUSEMAS | Komentářů: 2
    Vývoj webového prohlížeče Ladybird (10/2025)
    4.11. 04:22 | Komunita

    Na čem pracují vývojáři webového prohlížeče Ladybird (GitHub)? Byl publikován přehled vývoje za říjen (YouTube).

    Ladislav Hagara | Komentářů: 0
    Stav emulátorů terminálu v roce 2025
    4.11. 04:11 | Zajímavý článek

    Jeff Quast otestoval současné emulátory terminálu. Zaměřil se na podporu Unicode a výkon. Vítězným emulátorem terminálu je Ghostty.

    Ladislav Hagara | Komentářů: 11
    Amazon bude poskytovat cloudové služby OpenAI, hodnota kontraktu je 38 mld. dolarů
    3.11. 22:55 | IT novinky

    Amazon bude poskytovat cloudové služby OpenAI. Cloudová divize Amazon Web Services (AWS) uzavřela s OpenAI víceletou smlouvu za 38 miliard USD (803,1 miliardy Kč), která poskytne majiteli chatovacího robota s umělou inteligencí (AI) ChatGPT přístup ke stovkám tisíc grafických procesů Nvidia. Ty bude moci využívat k trénování a provozování svých modelů AI. Firmy to oznámily v dnešní tiskové zprávě. Společnost OpenAI také nedávno

    … více »
    Ladislav Hagara | Komentářů: 8
    Centrum | Napsat | Starší
    navrhněte » Anketa
    Jaké řešení používáte k vývoji / práci?
     (36%)
     (48%)
     (19%)
     (17%)
     (22%)
     (15%)
     (21%)
     (16%)
     (16%)
    Celkem 318 hlasů
     Komentářů: 15, poslední 2.11. 08:25
    Rozcestník
    AbcLinuxu
    HDmag.cz
    AbcLinuxu:/ Poradna / Linuxová poradna / Jak připojit nokii 3220 a 6125
    Štítky: Nokia, PC

    Dotaz: Jak připojit nokii 3220 a 6125

    Ratoncito avatar 16.6.2008 15:45 Ratoncito | skóre: 19 | blog: Foso
    Jak připojit nokii 3220 a 6125
    Přečteno: 803×
    Mám problém s připojením Nokií 3220 a 6125 (Případně i Motorolu razr v3 a nokii 62??) k pc. Našel jsem již pár návodů ale nefungovali mi nebo jsem je nepochopil. Mám Mandrivu 2008.0, originální kabel Nokia CA-53, neoriginální MA-8620E.
    Pokud budete chtít zdrojáky tak prosím rovnou pište adresy.

    Předem děkuji.
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    Nástroje: Začni sledovat (0) ?Zašle upozornění na váš email při vložení nového komentáře.

    Odpovědi

    16.6.2008 18:06 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Jeden konec kabelu strčíš do nokie, druhej do USB a na Nokii nastavíš příslišný mód (6151 umí jen modem, výstup na tiskárnu a úložný disk - jen pokud je v ní SD karta). Pokud chceš uložit kontakty, tak nastavíš ten modem a použiješ nějaký program typu gnokie. Pokud chceš ukládat data na kartu, tak storage. Následně by se ti mělo v /dev objevit nové zařízení (u mě storage typicky /dev/sda), které buď použije pro tu gnokii nebo se namountuje jako disk. 
    mount /dev/sda /mnt/hd
    A v tomto adresáři bude obsah úložného prostoru mobilního telefonu. Po skončení práce se musí nokia odpojit (umount /dev/sda), aby se zapsala data. Z důvodů nekompatibility některých nokií občas usb připojení dělá problémy.

    Pokud máš nějakou více multimediální distribuce, tak by to měla všechno udělat automaticky, nebo to jde nastavit.
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 18.6.2008 17:54 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Jak připojit kabel vím, příkaz mi nefunguje (nechápu označení), Gnokii mi padá
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    18.6.2008 18:14 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Jinak první parametr je zařízení, pod kterým je přístupná paměť v mobilu jako normální disk. Já mám /dev/sda, ale to se může systém od systému měnit. Nejlepší je asi po připojení zjistit tímto příkazem: 
    dmesg
    Druhý parametr je adresář v systému (libovolný, měl by být radši prázdný), kam se disk připojí (to je ale vše v man mount). V případě problémů sem hoď výpisy chyb a výpis z dmesg. Pro gnokii to bude jiné zařízení, nevím přesně, ale myslím něco jako ttyACM nebo tak něco, nikdy jsem to nepoužíval.
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 25.6.2008 20:41 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Stále nechápu

    výpis z dmesg 
    Linux version 2.6.22.9-desktop-1mdv (lcapitulino@n5.mandriva.com) (gcc version 4.2.2 20070909 (prerelease) (4.2.2-0.RC.1mdv2008.0)) #1 SMP Thu Sep 27 04:07:04 CEST 2007
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
 BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
found SMP MP-table at 000fb9f0
Entering add_active_range(0, 0, 65520) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->    65520
  HighMem     65520 ->    65520
early_node_map[1] active PFN ranges
    0:        0 ->    65520
On node 0 totalpages: 65520
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 479 pages used for memmap
  Normal zone: 60945 pages, LIFO batch:15
  HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F9F10, 0014 (r0 AMI   )
ACPI: RSDT 0FFF0000, 002C (r1 AMIINT INTEL845       10 MSFT       97)
ACPI: FACP 0FFF0030, 0081 (r1 AMIINT INTEL845       11 MSFT       97)
ACPI: DSDT 0FFF0120, 37F2 (r1  INTEL BROKDLEG     1000 MSFT  100000D)
ACPI: FACS 0FFF8000, 0040
ACPI: APIC 0FFF00C0, 005C (r1 AMIINT INTEL845        9 MSFT       97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists.  Total pages: 65009
Kernel command line: BOOT_IMAGE=linux root=341 resume=/dev/hdb7 splash=silent
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 2405.574 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 254676k/262080k available (2139k kernel code, 6676k reserved, 691k data, 280k init, 0k highmem, 0k BadRAM)
virtual kernel memory layout:
    fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
    lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
      .init : 0xc03ca000 - 0xc0410000   ( 280 kB)
      .data : 0xc0316d67 - 0xc03c3c84   ( 691 kB)
      .text : 0xc0100000 - 0xc0316d67   (2139 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4813.76 BogoMIPS (lpj=2406881)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Early unpacking initramfs... done
Freeing initrd memory: 797k freed
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
Total of 1 processors activated (4813.76 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0400-043f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: b000-bfff
  MEM window: dfd00000-dfdfffff
  PREFETCH window: bfa00000-dfafffff
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: dfe00000-dfefffff
  PREFETCH window: dfb00000-dfbfffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1214410664.207:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
vesafb: framebuffer at 0xd0000000, mapped to 0xd0880000, using 3750k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:57d1
vesafb: pmi: set display start = c00c5865, set palette = c00c58b1
vesafb: pmi: ports = b810 b816 b854 b838 b83c b85c b800 b804 b8b0 b8b2 b8b4 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 199458 bytes,<6>...found (800x600, 199410 bytes, v3).
Console: switching to colour frame buffer device 93x31
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 280k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
hdb: WDC WD3200AAJB-00TYA0, ATA DISK drive
hda: selected mode 0x45
hdb: selected mode 0x45
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
hdd: CDU5211, ATAPI CD/DVD-ROM drive
hdc: selected mode 0x42
hdd: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 >
hdb: max request size: 512KiB
hdb: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63, UDMA(100)
hdb: cache flushes supported
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 >
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000e400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Linux agpgart interface v0.102 (c) Dave Jones
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000e800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ec00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
agpgart: Detected an Intel 830M Chipset.
agpgart: AGP aperture is 64M @ 0xe0000000
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdffffc00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xd082ae00, 00:11:09:00:09:76, IRQ 21
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 50578 usecs
intel8x0: clocking to 48000
usb 2-2: new low speed USB device using uhci_hcd and address 3
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver usbmouse
drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
EXT3 FS on hdb1, internal journal
Adding 5269280k swap on /dev/hdb7.  Priority:-1 extents:1 across:5269280k
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.28 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
loop: module loaded
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2047 buckets, 16376 max)
No dock devices found.
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
Removing netfilter NETLINK layer.
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
fuse init (API version 7.8)
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[fglrx] Adapter chains initialized successfully!
[fglrx] CF object manager initialized successfully!
[fglrx]   vendor: 1002 device: 4152 count: 1
[fglrx] Maximum main memory to use for locked dma buffers: 198 MBytes.
[fglrx] ASYNCIO init succeed!
[fglrx] PAT is enabled successfully!
[fglrx] module loaded - fglrx 8.49.7 [May 12 2008] with 1 minors
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 18
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 5 changed to on
[fglrx] Internal AGP support requested, but kernel AGP support active.
[fglrx] Have to use kernel AGP support to avoid conflicts.
[fglrx] AGP detected, AgpState   = 0x1f000217 (hardware caps of chipset)
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[fglrx] AGP enabled,  AgpCommand = 0x1f000314 (selected caps)
[fglrx] Setup AGP aperture
[fglrx] GART Table is not in FRAME_BUFFER range 
[fglrx] Reserved FB block: Shared offset:0, size:0 
[fglrx] Reserved FB block: Unshared offset:7fff000, size:0 
[fglrx] interrupt source 20008000 successfully enabled
[fglrx] enable ID = 0x00000004
[fglrx] Receive enable interrupt message with irqEnableMask: 20008000
[fglrx] interrupt source 10000000 successfully enabled
[fglrx] enable ID = 0x00000005
[fglrx] Receive enable interrupt message with irqEnableMask: 10000000
eth0: no IPv6 routers present
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
eth0: no IPv6 routers present
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    25.6.2008 21:19 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Teď ještě připoj mobil na USB jako mass storage a napiš co do dmesg přibylo.
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 29.6.2008 16:57 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125 
    Linux version 2.6.22.19-desktop-2mdv (qateam@titan.mandriva.com) (gcc version 4.2.2 20071128 (prerelease) (4.2.2-3.1mdv2008.0)) #1 SMP Mon May 5 20:55:05 EDT 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
 BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
found SMP MP-table at 000fb9f0
Entering add_active_range(0, 0, 65520) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->    65520
  HighMem     65520 ->    65520
early_node_map[1] active PFN ranges
    0:        0 ->    65520
On node 0 totalpages: 65520
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 479 pages used for memmap
  Normal zone: 60945 pages, LIFO batch:15
  HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F9F10, 0014 (r0 AMI   )
ACPI: RSDT 0FFF0000, 002C (r1 AMIINT INTEL845       10 MSFT       97)
ACPI: FACP 0FFF0030, 0081 (r1 AMIINT INTEL845       11 MSFT       97)
ACPI: DSDT 0FFF0120, 37F2 (r1  INTEL BROKDLEG     1000 MSFT  100000D)
ACPI: FACS 0FFF8000, 0040
ACPI: APIC 0FFF00C0, 005C (r1 AMIINT INTEL845        9 MSFT       97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists.  Total pages: 65009
Kernel command line: BOOT_IMAGE=linux root=/dev/hdb1 resume=/dev/hdb7 splash=silent vga=788
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 2405.546 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 254696k/262080k available (2137k kernel code, 6676k reserved, 693k data, 280k init, 0k highmem, 0k BadRAM)
virtual kernel memory layout:
    fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
    lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
      .init : 0xc03ca000 - 0xc0410000   ( 280 kB)
      .data : 0xc03167ca - 0xc03c3c64   ( 693 kB)
      .text : 0xc0100000 - 0xc03167ca   (2137 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4813.73 BogoMIPS (lpj=2406865)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Early unpacking initramfs... done
Freeing initrd memory: 796k freed
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
Total of 1 processors activated (4813.73 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0400-043f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: b000-bfff
  MEM window: dfd00000-dfdfffff
  PREFETCH window: bfa00000-dfafffff
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: dfe00000-dfefffff
  PREFETCH window: dfb00000-dfbfffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1214742568.205:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
vesafb: framebuffer at 0xd0000000, mapped to 0xd0880000, using 3750k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:57d1
vesafb: pmi: set display start = c00c5865, set palette = c00c58b1
vesafb: pmi: ports = b810 b816 b854 b838 b83c b85c b800 b804 b8b0 b8b2 b8b4 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 199458 bytes,<6>...found (800x600, 199410 bytes, v3).
Console: switching to colour frame buffer device 93x31
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 280k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
hdb: WDC WD3200AAJB-00TYA0, ATA DISK drive
hda: selected mode 0x45
hdb: selected mode 0x45
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
hdd: CDU5211, ATAPI CD/DVD-ROM drive
hdc: selected mode 0x42
hdd: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 >
hdb: max request size: 512KiB
hdb: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63, UDMA(100)
hdb: cache flushes supported
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 >
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
kjournald starting.  Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102 (c) Dave Jones
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
agpgart: Detected an Intel 830M Chipset.
agpgart: AGP aperture is 64M @ 0xe0000000
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
hdc: ATAPI 79X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ec00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
hdd: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdffffc00
usb 2-2: new low speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 20
eth0: RealTek RTL8139 at 0xd082ae00, 00:11:09:00:09:76, IRQ 20
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 21
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 21
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usb 2-2: device not accepting address 2, error -71
intel8x0_measure_ac97_clock: measured 50525 usecs
intel8x0: clocking to 48000
usb 2-2: new low speed USB device using uhci_hcd and address 4
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver usbmouse
drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
EXT3 FS on hdb1, internal journal
Adding 5269280k swap on /dev/hdb7.  Priority:-1 extents:1 across:5269280k
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.28 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
loop: module loaded
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2047 buckets, 16376 max)
No dock devices found.
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
Removing netfilter NETLINK layer.
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
fuse init (API version 7.8)
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[drm] Initialized radeon 1.27.0 20060524 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 5 changed to on
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
eth0: no IPv6 routers present
UDF-fs: Partition marked readonly; forcing readonly mount
UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'FIFA07', timestamp 2006/09/25 20:07 (1078)
usb 4-2: new high speed USB device using ehci_hcd and address 3
usb 4-2: configuration #1 chosen from 1 choice
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access     USB      BAR              2.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
ready
sd 0:0:0:0: [sda] 512000 512-byte hardware sectors (262 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 512000 512-byte hardware sectors (262 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb 4-2: USB disconnect, address 3
VFS: busy inodes on changed media.
VFS: busy inodes on changed media.
usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
pl2303 1-2:1.0: pl2303 converter detected
usb 1-2: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    29.6.2008 17:30 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Podle tohoto: 
    usb 1-2: new full speed USB device using uhci_hcd and address 2
usb 1-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
pl2303 1-2:1.0: pl2303 converter detected
usb 1-2: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
    ten kabel, u kterého to vypsalo tohle, není USB konektor, ale USB-serial převodník. Ten používali hlavně staré Nokie, ty Nokie, cos uváděl, už mají USB. Blbý je to, že ty konektory na mobilu jsou stejný i pro USB nebo serial rozhraní, rozdíl mezi nima je ten, že USB jsou jen 4 dráty a serial je integráč a 3-4 dráty :-D.

    Pokud tohle: 
    usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
scsi 0:0:0:0: Direct-Access     USB      BAR              2.00 PQ: 0 ANSI: 2
usb-storage: device scan complete
ready
sd 0:0:0:0: [sda] 512000 512-byte hardware sectors (262 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
sd 0:0:0:0: [sda] 512000 512-byte hardware sectors (262 MB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 03 00 00 00
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
    bylo vygenerováno po připojení toho druhého kabelu, tak je to ten správný kabel a podle posledního řádku by mělo existovat rozhraní /dev/sda1, které lze už namountovat příkazem mount /dev/sda1 místo_kam_se_namountuje .
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 29.6.2008 17:58 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    S originálním: 
    Linux version 2.6.22.19-desktop-2mdv (qateam@titan.mandriva.com) (gcc version 4.2.2 20071128 (prerelease) (4.2.2-3.1mdv2008.0)) #1 SMP Mon May 5 20:55:05 EDT 2008
BIOS-provided physical RAM map:
 BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
 BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
 BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
 BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
 BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
 BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
 BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
 BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
 BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
255MB LOWMEM available.
found SMP MP-table at 000fb9f0
Entering add_active_range(0, 0, 65520) 0 entries of 256 used
Zone PFN ranges:
  DMA             0 ->     4096
  Normal       4096 ->    65520
  HighMem     65520 ->    65520
early_node_map[1] active PFN ranges
    0:        0 ->    65520
On node 0 totalpages: 65520
  DMA zone: 32 pages used for memmap
  DMA zone: 0 pages reserved
  DMA zone: 4064 pages, LIFO batch:0
  Normal zone: 479 pages used for memmap
  Normal zone: 60945 pages, LIFO batch:15
  HighMem zone: 0 pages used for memmap
DMI 2.3 present.
ACPI: RSDP 000F9F10, 0014 (r0 AMI   )
ACPI: RSDT 0FFF0000, 002C (r1 AMIINT INTEL845       10 MSFT       97)
ACPI: FACP 0FFF0030, 0081 (r1 AMIINT INTEL845       11 MSFT       97)
ACPI: DSDT 0FFF0120, 37F2 (r1  INTEL BROKDLEG     1000 MSFT  100000D)
ACPI: FACS 0FFF8000, 0040
ACPI: APIC 0FFF00C0, 005C (r1 AMIINT INTEL845        9 MSFT       97)
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode:  Flat.  Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
Built 1 zonelists.  Total pages: 65009
Kernel command line: BOOT_IMAGE=linux root=/dev/hdb1 resume=/dev/hdb7 splash=silent vga=788
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 1024 (order: 10, 4096 bytes)
Detected 2405.564 MHz processor.
Console: colour dummy device 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 254696k/262080k available (2137k kernel code, 6676k reserved, 693k data, 280k init, 0k highmem, 0k BadRAM)
virtual kernel memory layout:
    fixmap  : 0xffe16000 - 0xfffff000   (1956 kB)
    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
    vmalloc : 0xd0800000 - 0xff7fe000   ( 751 MB)
    lowmem  : 0xc0000000 - 0xcfff0000   ( 255 MB)
      .init : 0xc03ca000 - 0xc0410000   ( 280 kB)
      .data : 0xc03167ca - 0xc03c3c64   ( 693 kB)
      .text : 0xc0100000 - 0xc03167ca   (2137 kB)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 4813.70 BogoMIPS (lpj=2406854)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 128K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b080 00004400 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
CPU0: Thermal monitoring enabled
Compat vDSO mapped to ffffe000.
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 12k freed
Early unpacking initramfs... done
Freeing initrd memory: 796k freed
ACPI: Core revision 20070126
ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
CPU0: Intel(R) Celeron(R) CPU 2.40GHz stepping 09
Total of 1 processors activated (4813.70 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=2
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
* this clock source is slow. If you are sure your timer does not have
* this bug, please use "acpi_pm_good" to disable the workaround
PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 0400-043f claimed by ICH4 GPIO
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICHB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11 *12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: Power Resource [URP1] (off)
ACPI: Power Resource [URP2] (off)
ACPI: Power Resource [FDDP] (off)
ACPI: Power Resource [LPTP] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 12 devices
ACPI: ACPI bus type pnp unregistered
PnPBIOS: Disabled
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
ACPI: RTC can wake from S4
pnp: 00:01: iomem range 0xfee00000-0xfeefffff could not be reserved
Time: tsc clocksource has been installed.
PCI: Bridge: 0000:00:01.0
  IO window: b000-bfff
  MEM window: dfd00000-dfdfffff
  PREFETCH window: bfa00000-dfafffff
PCI: Bridge: 0000:00:1e.0
  IO window: c000-cfff
  MEM window: dfe00000-dfefffff
  PREFETCH window: dfb00000-dfbfffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 98304 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1214760297.206:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:00.0
vesafb: framebuffer at 0xd0000000, mapped to 0xd0880000, using 3750k, total 16384k
vesafb: mode is 800x600x16, linelength=1600, pages=16
vesafb: protected mode interface info at c000:57d1
vesafb: pmi: set display start = c00c5865, set palette = c00c58b1
vesafb: pmi: ports = b810 b816 b854 b838 b83c b85c b800 b804 b8b0 b8b2 b8b4 
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 199458 bytes,<6>...found (800x600, 199410 bytes, v3).
Console: switching to colour frame buffer device 93x31
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Generic RTC Driver v1.07
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /class/input/input0
TCP cubic registered
NET: Registered protocol family 1
Using IPI No-Shortcut mode
BIOS EDD facility v0.16 2004-Jun-25, 2 devices found
Freeing unused kernel memory: 280k freed
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ST380011A, ATA DISK drive
hdb: WDC WD3200AAJB-00TYA0, ATA DISK drive
hda: selected mode 0x45
hdb: selected mode 0x45
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-ST DVDRAM GSA-4167B, ATAPI CD/DVD-ROM drive
hdd: CDU5211, ATAPI CD/DVD-ROM drive
hdc: selected mode 0x42
hdd: selected mode 0x42
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
 hda: hda1 hda2 < hda5 >
hdb: max request size: 512KiB
hdb: 625142448 sectors (320072 MB) w/8192KiB Cache, CHS=38913/255/63, UDMA(100)
hdb: cache flushes supported
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 >
swsusp: Marking nosave pages: 000000000009f000 - 0000000000100000
swsusp: Basic memory bitmaps created
swsusp: Basic memory bitmaps freed
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
kjournald starting.  Commit interval 5 seconds
EXT3-fs: hdb1: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 4751462
ext3_orphan_cleanup: deleting unreferenced inode 4751453
ext3_orphan_cleanup: deleting unreferenced inode 4751454
ext3_orphan_cleanup: deleting unreferenced inode 4751455
ext3_orphan_cleanup: deleting unreferenced inode 4751452
EXT3-fs: hdb1: 5 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Linux agpgart interface v0.102 (c) Dave Jones
agpgart: Detected an Intel 830M Chipset.
agpgart: AGP aperture is 64M @ 0xe0000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
uhci_hcd: Unknown symbol usb_hcd_pci_suspend
uhci_hcd: Unknown symbol usb_hcd_resume_root_hub
uhci_hcd: Unknown symbol usb_hcd_pci_probe
uhci_hcd: Unknown symbol usb_disabled
uhci_hcd: Unknown symbol usb_calc_bus_time
uhci_hcd: Unknown symbol usb_hcd_pci_resume
uhci_hcd: Unknown symbol usb_hcd_giveback_urb
uhci_hcd: Unknown symbol usb_hcd_poll_rh_status
uhci_hcd: Unknown symbol usb_hcd_pci_remove
uhci_hcd: Unknown symbol usb_root_hub_lost_power
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
iTCO_vendor_support: vendor-support=0
usbcore: registered new device driver usb
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=1)
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000e400
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000e800
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
8139too Fast Ethernet driver 0.9.28
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000ec00
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdffffc00
usb 1-2: new full speed USB device using uhci_hcd and address 2
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 21 (level, low) -> IRQ 21
eth0: RealTek RTL8139 at 0xd086ae00, 00:11:09:00:09:76, IRQ 21
eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
usb 1-2: device not accepting address 2, error -71
intel8x0_measure_ac97_clock: measured 50504 usecs
intel8x0: clocking to 48000
usb 1-2: new full speed USB device using uhci_hcd and address 4
usb 1-2: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using uhci_hcd and address 2
usb 2-2: configuration #1 chosen from 1 choice
usbcore: registered new interface driver hiddev
input: Logitech Optical USB Mouse as /class/input/input1
input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1d.1-2
usbcore: registered new interface driver usbhid
drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
usbcore: registered new interface driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
usbcore: registered new interface driver usbserial_generic
drivers/usb/serial/usb-serial.c: USB Serial Driver core
drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
pl2303 1-2:1.0: pl2303 converter detected
usb 1-2: pl2303 converter now attached to ttyUSB0
usbcore: registered new interface driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
usbcore: registered new interface driver usbmouse
drivers/hid/usbhid/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
p4-clockmod: P4/Xeon(TM) CPU On-Demand Clock Modulation available
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
SCSI subsystem initialized
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
EXT3 FS on hdb1, internal journal
Adding 5269280k swap on /dev/hdb7.  Priority:-1 extents:1 across:5269280k
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb6, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on hdb5, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
NTFS driver 2.1.28 [Flags: R/O DEBUG MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
loop: module loaded
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (2047 buckets, 16376 max)
No dock devices found.
input: Power Button (FF) as /class/input/input2
ACPI: Power Button (FF) [PWRF]
input: Power Button (CM) as /class/input/input3
ACPI: Power Button (CM) [PWRB]
input: Sleep Button (CM) as /class/input/input4
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
Removing netfilter NETLINK layer.
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
Mobile IPv6
NET: Registered protocol family 17
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
fuse init (API version 7.8)
usbcore: registered new interface driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[drm] Initialized drm 1.1.0 20060810
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
[drm] Initialized radeon 1.27.0 20060524 on minor 0
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 0 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 1 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 2 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 3 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 4 changed to on
bootsplash 3.1.6-2004/03/31: looking for picture...<6>...found (800x600, 14966 bytes, v3).
bootsplash: status on console 5 changed to on
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
eth0: no IPv6 routers present
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
[drm] Setting GART location based on new memory map
[drm] Loading R300 Microcode
[drm] writeback test succeeded in 1 usecs
usb 1-2: USB disconnect, address 4
pl2303 ttyUSB0: pl2303 converter now disconnected from ttyUSB0
pl2303 1-2:1.0: device disconnected
usb 1-2: new low speed USB device using uhci_hcd and address 5
usb 1-2: device not accepting address 5, error -71
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    29.6.2008 18:28 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Tak to tedy nevím. Ty jsi vytáhl jeden kabel a zapojil druhý? Jak na připojení reaguje mobil?

    Jinak stačí když sem zkopíruješ to co pouze přibylo po připojení, jinak se v tom půjde blbě vyznat... (stačí si uložit výpis před a po do souboru a pak na to pustit třeba diff :-D).
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 29.6.2008 18:33 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Ano, nijak, diff neznám (připojuji 3220, 6125 napíše 
    Připojen datový kabel USB. Zvolte režim.
    )
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    29.6.2008 18:39 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Před pokusem: 
    dmesg > soubor1.txt
    Po pokusu: 
    dmesg > soubor2.txt
    ..a sem vložit to co je soubor2.txt oproti soubor1.txt navíc, pokud je někdo jako já línej, tak stačí: 
    diff soubor1.txt soubor2.txt
    a ten přírustek se vypíše sám :-D.

    Teď zkus všechny možnosti co volba v mobilu nabízí a hoď sem ten rozdíl pro každou možnost.
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 29.6.2008 18:56 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Lze jen standartní režim, na Tisk hlásí 
    Import z fotoaparátu...(pc), Připojuji se k tiskárně (mobil)
    , na Ukládání dat 
    paměťová karta užívána jiným zařízením
    Oba po chvilce zmizí
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    29.6.2008 19:02 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Aha, ale standardní režim je jen pro vytvoření připojení k internetu přes mobil (takový trochu dražší modem) a synchronizaci kontaktů v mobilu s počítačem. To s tou paměťovou kartou je docela divné (je to vlastně režim mass storage), každopádně to by měl být problém v samotným mobilu. Většinou to píše, když je někde otevřená složka z pam. karty, nebo z ní běží program (Nokia mobil neumí pracovat zároveň s kartou a zároveň s USB).
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 29.6.2008 19:12 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    A ta 3220?
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    29.6.2008 19:35 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Teď se v tom neorientuju, který z předchozích výpisů se týká 3220? Jinak podle googlu 3220 neumí mass storage (nepodporuje ani kartu). Takže jí půjde použít jen na synchronizaci/modem.
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 29.6.2008 19:01 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Před a po vybrání režimu 
    453,482d452
< usb 1-2: USB disconnect, address 27
< usb 1-2: new full speed USB device using uhci_hcd and address 28
< usb 1-2: configuration #1 chosen from 1 choice
< usb 1-2: USB disconnect, address 28
< usb 1-2: new full speed USB device using uhci_hcd and address 29
< usb 1-2: configuration #1 chosen from 1 choice
< drivers/usb/class/cdc-acm.c: Ignoring extra header, type -3, length 4
< cdc_acm 1-2:1.1: ttyACM0: USB ACM device
< usb 1-2: bad CDC descriptors
< usb 1-2: USB disconnect, address 29
< usb 1-2: new full speed USB device using uhci_hcd and address 30
< usb 1-2: configuration #1 chosen from 1 choice
< drivers/usb/class/cdc-acm.c: Ignoring extra header, type -3, length 4
< cdc_acm 1-2:1.1: ttyACM0: USB ACM device
< usb 1-2: bad CDC descriptors
< usb 1-2: USB disconnect, address 30
< usb 1-2: new full speed USB device using uhci_hcd and address 31
< usb 1-2: configuration #1 chosen from 1 choice
< drivers/usb/class/cdc-acm.c: Ignoring extra header, type -3, length 4
< cdc_acm 1-2:1.1: ttyACM0: USB ACM device
< usb 1-2: bad CDC descriptors
< usb 1-2: USB disconnect, address 31
< usb 1-2: new full speed USB device using uhci_hcd and address 32
< usb 1-2: configuration #1 chosen from 1 choice
< usb 1-2: USB disconnect, address 32
< usb 1-2: new full speed USB device using uhci_hcd and address 33
< usb 1-2: configuration #1 chosen from 1 choice
< drivers/usb/class/cdc-acm.c: Ignoring extra header, type -3, length 4
< cdc_acm 1-2:1.1: ttyACM0: USB ACM device
< usb 1-2: bad CDC descriptors
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    29.6.2008 19:29 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Hmmm tak podle tohoto výpisu to vypadá na to, že se stále resetuje připojení usb zařízení. Na vině by mohla být nekompatibilita Linuxu s nokií nebo nestandardně implementované USB v nokii nebo by se do toho mohl vkládat nějaký hotplug démon, každopádně pro první dvě možnosti není jednoduché řešení.
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 29.6.2008 19:33 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    A jaké je to složité?
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    29.6.2008 19:38 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Opravení jádra, tak aby to podporoval a nebo donucení Nokie, aby dodržovala standardy :-).
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 29.6.2008 19:40 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    1- Jak?
    2- Jde to?
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    29.6.2008 19:59 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Ano pokud je zařízení jen nepodporované v Linuxu, tak to samozřejmě jde, musel bys scanovat co si to zařízení posílá s PC a podle toho upravit zdrojový kód ovladače jádra. A nebo by to šlo, pokud je to opravdu tímto, nahlásit na bugzillu kernelu Mandrivy, aby to vývojáři opravili.
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    Ratoncito avatar 29.6.2008 20:07 Ratoncito | skóre: 19 | blog: Foso
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    A neexistuje něco jednoduššího/rychlejšího?
    OS: ArchLinux, WM: Compiz-fusion | Na toho vemte bič a hůl, to není člověk, to je vůl!!!
    29.6.2008 20:18 pc2005 | skóre: 38 | blog: GardenOfEdenConfiguration | liberec
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    Možná by šlo použít nějakou virtualizaci a do ní nainstalovat Windows a použít pro synchronizaci Nokiu PCSuite.
    Intel meltdown a = arr[x[0]&1]; karma | 帮帮我，我被锁在中国房
    the.max avatar 30.6.2008 00:48 the.max | skóre: 46 | blog: Smetiště
    Rozbalit Rozbalit vše Re: Jak připojit nokii 3220 a 6125
    on byva obene problem aby pri pouziti virtualizace byl pristupny i usb uvnitr virtualniho stroje:-(
    KERNEL ULTRAS Fan Team || Sabaton - nejlepší učitel dějepisu || Gentoo - dokud nás systemd nerozdělí.

    Založit nové vlákno • Nahoru

    Tiskni Sdílej: Linkuj Jaggni to Vybrali.sme.sk Google Del.icio.us Facebook

    Píšeme jinde
    ISSN 1214-1267   www.czech-server.cz
    Redakce | Inzerce | Podmínky použití | Osobní údaje
    © 1999-2015 Nitemedia s. r. o. Všechna práva vyhrazena.